I just used PLC Net tool (from your store) and didn't know why I couldn't upload program through Transfer Utility tool (it won't read the internal files of the hmi 800 ) so looks like only Panel View Plus or I need some update (firmware) in the software ,so CCW worked and got files from bad hmi so waiting on new one to download the hmi file Thanks Tim.
@TimWilborne
28 күн бұрын
You are welcome
@truemanautomation4433
2 жыл бұрын
cannot start application with terminal firmware version 5.011 or earlier while downloading Project
@marcelbaki2858
3 жыл бұрын
Thanks Tim
@TimWilborne
3 жыл бұрын
You are welcome!
@hrc100
3 жыл бұрын
Hi Tim, I am using the a micro 830 qwb and t4t hmi, i already made communication with the PLC using an USB cable, i want to make a communication to the HMI using a 1761 cbl but i could not do it. how can i communicate my computer with the HMI?
@TimWilborne
3 жыл бұрын
I think the T4T uses a 2711-NC13 to communicate with your PC.
@sowmiyasakthikumar7490
3 жыл бұрын
Hi Tim, my CCW throws a CCW.shell error and closes every time when I try opening CCW. What should I do to clear this one?
@TimWilborne
3 жыл бұрын
That is going to be a tough one, probably Visual Studio related. Might start with a fresh install.
@Ivaneliud1
3 жыл бұрын
Good day, Do you have a video that shows how to backupm, upload and download an application to panelview 1400e?
@TimWilborne
2 жыл бұрын
No, haven't worked with one of those in a long time.
@AllenCudworth
Жыл бұрын
Love the videos Tim, wanted to ask if you ever connected a different manufacturer HMI to a Micro850. I am struggling to connect a EZ3 HMI to the Micro 850 via ethernet, can not get it to communicate.
@TimWilborne
Жыл бұрын
Hi Allen, chances are it is in the path and communications protocol. Those are the two things that most often cause trouble no matter what brand the HMI is. Good luck!
@AllenCudworth
Жыл бұрын
@@TimWilborne Thanks for the response Tim, I am using a EZ3-T73-E (EZAutomation), working with the HMI vendor they say to set the IP address the same as the PLC but I get an error on the PLC for duplicate IP address and still no connection. Asking my AB rep, he gave me a quote for a Panel View 800
@sujay_entertainmant_vlog
Жыл бұрын
How to communicate Compact logic L32E with Panel view 800 HMI
@TimWilborne
Жыл бұрын
I don't think it is possible with the CIP driver. Maybe Modbus?
@sergiolopez-so1yx
2 жыл бұрын
hello mr tim, it would be great if you could show how to update firmware, I have ccw version 13 and I cannot communicate with the panelview because they are version 5.013
@TimWilborne
2 жыл бұрын
That would be good. I just had to upgrade some, I have a few more to upgrade and will try to hit the record button.
@sergiolopez-so1yx
2 жыл бұрын
@@TimWilborne I had a problem with version 5.013 rslinx does not read it and when I ping it, it responds. So i delete the harmony files of RsLinx and same problem not read. I had to go down to version 5.012 with a USB so I could read it with Rslinx to be able to get version 6.011 with ControlFLASh. just sharing in case someone has the same problem. thanks for your videos mr Tim.
@akupadhyayula
2 жыл бұрын
Another great video Tim. Would this method work for Panel View Plus 1000? I tried and it did not. Also Another question is can you please make a video on how to enable VNC on panel view plus 1000
@TimWilborne
2 жыл бұрын
The Panelview Plus uses RsView Studio
@sujay_entertainmant_vlog
Жыл бұрын
@@TimWilborne how to communicate Compact logic L32E with Panel view 800 HMI over Ethernet cable?
@atulbhaigandhi6540
3 жыл бұрын
How to or from where to start career in automation after doing bachelors in electrical engineering.!!! As per learning purpose for industrial automation.!! For become professional engineer.!
@TimWilborne
3 жыл бұрын
We have been doing some podcast on that recently. Check out twcontrols.com/podcast.
Пікірлер: 26