Informative video, but what I loved most of all was the forest background noise.
@KASMS
3 жыл бұрын
Very informative Video; Thank you for the quality content!
@Aziz-zn5tu
2 жыл бұрын
Thank you so much i struggled to get it calibrated because there is no video on calibration
@escargotiskuhol
3 жыл бұрын
Thank you! So helpful. I just received one from an online shop.
@larryenglish8900
7 ай бұрын
how do you test 65w chargers?
@denniswestlund3347
2 ай бұрын
I got different color on the direction arrow. green, yellow, or orange. Whats the different And my white and black give different Amp using the same cable en power source.
@elhotag
11 ай бұрын
Спасибо 👍
@YoelDiamante
11 ай бұрын
the instruction manual about the calibration has been wrongly traduced. thank you.
@elvinventucillo4501
2 жыл бұрын
Is this one directional only? Can the tester be reversed so that the direction off charging is on the male tye C side?
@lumi6660
2 жыл бұрын
Yes only 1 direction
@wpyoga
Жыл бұрын
It works in both directions!
@ayman.k.a
3 жыл бұрын
Thank you friend, but I now have a problem, after resetting factory settings it is no longer detecting 9 volt ! only stuck at 5 =(
@Adrian-lr5xq
3 жыл бұрын
That's because he has done this wrong, Your not meant to factory reset unless your using a 5v exact wall adaptor to calibrate it properly.
@sapphireblue88
3 жыл бұрын
@@Adrian-lr5xq ooo got it so I gotta reset it using. 5V Wall Charger?
@Adrian-lr5xq
3 жыл бұрын
@@sapphireblue88 Yeah, It doesn't have to be a wall charger even a 5v powerbank will do but it's probably best with a 5v phone charger as they may be more accurate with 5v output, It says in my leaflet about it.
@lumi6660
3 жыл бұрын
You need to unplug any load the try reset without any load plugged
@isay2691
2 жыл бұрын
Thanks for the video on how to reset. After I inadvertently connect the iPad (15V) as a load and reset the tester, the tester only outputs 5V. Oops! I tried resetting the tester with a charger or powerbank with a 5V output as recommended. However, some chargers and powerbanks I have had the tester not powered on unless the load was connected. Hmm.. Finally, I was able to reset the tester without connecting a load using an old-fashioned 5V output powerbank and a USB-A to USB-C cable. It has a 5V micro-USB input and a 5V USB-A output port. Now, voltages above 5V are also displayed normally. However, even after the reset, the long-standing problem with this tester, which was my reset purpose, was not resolved. The problem is that this tester doesn't normally display more than 65W of wattage. I would like to share a little information about this tester. Voltage and Current values are displayed normally, but wattage above 65W is not displayed correctly. If you are trying to test a charger or power bank that supports more than 65W output, this tester can disappoint you. The user may need a calculator to find out the watts. Voltage × Current = Power (Watts) If Power value exceeds 65W, the wattage display is initialized, and the display starts from 1W again. For example, 68W->3W, 83W->18W. I bought several of these testers in 2019 to test chargers, powerbanks and cables that support 100W output. Test your testers to make sure they don't have the same problem as me. The problem may have been fixed since I bought it. I have dozens of USB testers. Some of those testers are quite incompatible with some chargers and powerbanks. They don't show anything on the screen. Currently, the most reliable USB tester is “Power-Z” product. The USB-C tester is “KM001C”. The price is 40-50 USD, which is quite expensive for a USB tester for non-professional users. Model “KM001” is a product with a USB-A plug. It also has USB-C ports.
Пікірлер: 18