Thanks! That's a video i've not seen specifically for the barchetta and will definitely help me in a project
@pauliecabs
3 жыл бұрын
Thanks. Glad you find it useful. I only wish it had worked with my ABS ECU!
@rqinn
3 жыл бұрын
@@pauliecabs I have been following since the begining as we bought our Barchettas at the exact same time, and i have done bascally the same steps as yours to make it pass the inspection, I was luckier and it went through like a charm, I seriously hope you find the answer to your issue, and even let you know if i someday hit a possible solution
@pauliecabs
3 жыл бұрын
Thanks for watching! I think it must be the ABS module. There's not really anything else it can be! I'm determined to get it fixed and through the inspection.
@edo.r1324
3 жыл бұрын
Ciao, another brilliant video. Hope they sought out your brake problem.the lcd bulbs make a bug improvement..looks much better 😉 bravo👏
@pauliecabs
3 жыл бұрын
Thanks! Can't wait to get back on the road. At the moment the only place I get to go to is the test centre!
@drjubierre
3 жыл бұрын
Can you post the link for the bulbs? Thanks!!
@pauliecabs
3 жыл бұрын
I've put a link in the description
@warrensuffolk6040
2 жыл бұрын
Hi, great videos and subscribed to your channel. I'm a bit late to this but had the same ABS problem with the 2Si unit in my Alfa 916 Spider. You need the SMART examiner and software to interact with the 2Si which is/was unfortunately Fiat/Alfa/Lancia main dealer only. I was fortunate and had access to one so made the diagnosis, swap out and subsequent bleeding etc. pretty straightforward. Very tempted by a barchetta for my next project!
@pauliecabs
2 жыл бұрын
Thanks for subscribing. Glad you like the videos. I'm a complete amateur so it's all a voyage of discovery for me. I swapped out the ABS unit for a new one and bled the brakes myself. It got through the inspection ok...eventually! I don't think there's anyone down here that would still have the Fiat Examiner software which is a shame. I went to a Bosch service centre and they didn't have it.
@warrensuffolk6040
2 жыл бұрын
@@pauliecabs Thanks for the reply and I'm an amateur too, I was just lucky and have got to know an Alfa/Fiat/Maserati indie near me and he kindly lent it to me from his vast collection of obsolete main dealer test gear. I'm glad this worked out so easily for you, I had to use all of the Examiner functionality to bleed mine fully. Love the car btw, great project.
@victormoga6815
2 жыл бұрын
Thank you for your great work !
@pauliecabs
2 жыл бұрын
My pleasure!
@javierlucio339
3 жыл бұрын
Nice video, running Windows in a Mac always make me giggle. I got also the ECU Scan but because a error in the airbag, very common when you disconnect the airbag sensor underneath the passenger seat with the battery connected. If worked for me just fine. Question: Does your electric antenna works? And the clock on the dashboard? See ya!
@pauliecabs
3 жыл бұрын
Lol I need Windows & Mac so have them both on the one machine! I'll remember that about the sensor in case I disconnect mine, thanks. Clock doesn't work properly will need to replace (or repair??) at some point. Mine didn't come with the antenna. I have a nice rubber stopper in the antenna hole :-(
@frankpeutz9106
2 жыл бұрын
Hi, I own a ‘97 barchetta and really appreciated your video! Question: did you use only the free software version in this video? Also is it possible to reset an airbag warning light with the free version (happens sometimes when seat is repositioned)? Keep on working on your b. it’s inspiring. Frank (Be)
@pauliecabs
2 жыл бұрын
I did use the free version but I don't know about resetting the airbag light, sorry. I will be fitting a new steering wheel soon without an airbag so it's something that might come up!
@frankpeutz9106
2 жыл бұрын
@@pauliecabs well, wait and see! :-)
@loubarjot86
2 жыл бұрын
@@frankpeutz9106 juste like u, i own a '97 Barchetta with a airbag warning light, did u fix it ?
@pauliecabs
2 жыл бұрын
Yes, I fixed it in the end. Missing bulb and strange fuse problem in the engine bay.
@mrwebtraffic1
3 жыл бұрын
Hi, check out the various threads on UK barchetta forum re brake balance issued connected with pressure splitter . Maybe you've already done that, but various owners have unbalanced pressure
@pauliecabs
3 жыл бұрын
Thanks for that. The power regulator has been changed and now it's looking like it might need a new ABS module :-(
@mrwebtraffic1
3 жыл бұрын
@@pauliecabs boooooo.....
@peterpotter6319
2 жыл бұрын
Great vid. any chance you could put a link to where to get the correct cables
@pauliecabs
2 жыл бұрын
Thanks! Don't forget to like and Subscribe! I got them from Gendan. There's a link in the description.
@victormoga6815
2 жыл бұрын
Good Evening, I'm Fiat Barchetta fan. On my Barchetta, from 1998, I have a problem. The Key Code sensor remains on and the engine is not starting. This problem is recent from just a couple of weeks. I'm not use the car during winter. Thank you very much for your help.
@pauliecabs
2 жыл бұрын
Do you have the owners handbook? There are instructions on page 84 on how you can perform an emergency startup. If you don't have this then email me and I will send you a copy.
@Zack5906
2 жыл бұрын
Hello, I bought the kit to connect to the control unit of my 98 fiat barchetta. But I can't configure the USB port with the supplied software can any of you help me?
@pauliecabs
2 жыл бұрын
Where did you buy the cable from? Maybe try the multiecuscan forum forum.multiecuscan.net/
@planreduc7798
Жыл бұрын
CH 340 drivers when you connect it to windows, did you find the right obd cable on your car ? and where ?
@gregoryrey3005
3 жыл бұрын
Hi, thank you for this very instructive video ! Where did you buy the led bulbs ? I’m looking forward to change them on my barchetta 😉
@pauliecabs
3 жыл бұрын
Glad you found it useful. I've included a link in the description!
@normanoeser1646
2 жыл бұрын
Link for the LEDs please!
@pauliecabs
2 жыл бұрын
@@normanoeser1646 The link is in the description of the video
@normanoeser1646
2 жыл бұрын
Unfortunately the link doesn't work, I can't find the LED on the side either!
@pauliecabs
2 жыл бұрын
@@normanoeser1646 Maybe try contacting them directly via email
@mickael3516
2 жыл бұрын
Thanks I have the exact 1997 same model and was searching this injection ECU plug for a long time. I found a yellow one in the passengers leg but it does not fit the 3 pins adaptor so I guess this is not the good one
@pauliecabs
2 жыл бұрын
I had another cable on mine as well which wasn't the 3 pin. Sorry I don't know what it's for.
@planreduc7798
Жыл бұрын
i have a 99' barchetta and a yellow cable at the same space, it is a 3 pins with 2 pins really connected (GND+KLINE), i am pretty sure it's the good "OBD" cable, but with a vagcom cable, adapter & software i get nothing, no connection to ECU, i am still looking for a solution.
@MadsGormLarsen
Жыл бұрын
Perfect:)
@pauliecabs
Жыл бұрын
It's a great tool to see what's going on
@loubarjot86
2 жыл бұрын
Thxs for the video, it's rlly help. But i don't find ur adaptator to usb. Can u give me the référence pls ? Thx in advance
@pauliecabs
2 жыл бұрын
I'm glad you enjoyed the video. I got the cable from a UK company called Gendan. The link is in the video description.
@xokquake
2 жыл бұрын
Hi Paulie! Great video series! Which are de type of the led bulbs? (don't have them on Barchetta parts and trying on the web) thanx!
@pauliecabs
2 жыл бұрын
Glad you like the videos. I had to email Barchettaparts as they weren't listed on the web site
@hakaluku
Жыл бұрын
Do you HAVE to connect the red cable to the battery positive terminal? Or does ot work without it since the pc has its own power? I failed connecting today, but I did not connect the red cable because I thought you would only need that for a scanner that doesn have its own power
@pauliecabs
Жыл бұрын
If you're using the same cable set up as mine then you need to connect the red cable to a power source such as the battery.
@buhans2160
2 жыл бұрын
Heym where did you buy the bulbs. Can I get them in "any" color? Thx for the vids.
@pauliecabs
2 жыл бұрын
I got mine from barchettaparts.com Don't forget to like and subscribe 😃
@AppiaLancia
2 жыл бұрын
Ciao grazie alla tua dettagliata spiegazione sono entrato nella centralina. Non ci sono errori. Il meccanico ha sostituito la guarnizione della testata ed adesso al minimo il motore perde colpi. Dal software si può vedere se il motore è stato messo bene in fase?
@pauliecabs
2 жыл бұрын
Grazie per i tuoi commenti. Mi dispiace di non essere un esperto nell'uso del software quindi non conosco la risposta. Comunque dici che la guarnizione della testata è stata sostituita, il meccanico ha controllato se la testata era deformata? Inoltre, sto usando Google per tradurre, spero che tu possa capire!
@martijn1800
3 жыл бұрын
Nice video that you succeed to diagnose your barchetta. I have a question about that. I own a yellow barchetta from 1997 and also diagnosed it with MultiEcuscan. My engine has sometimes difficulties when idling. I found out that the engine is running rich only at idle. The lambda integrator and FRA parameter show negative values which means that about 10% less fuel is injected than it should be. When I rev the engine the parameters are going to normal values. May I ask you what your values are from the lambda integrator, FRA parameter and air quantity on idle when the engine is warm? Than I can compare it with my barchetta. I suspect the MAF sensor, which is about 3.6 gr/s at idle. I would really appreciate your answer.
@pauliecabs
3 жыл бұрын
Ok can do. Send me an email and I will reply with my results!
@martijn1800
3 жыл бұрын
@@pauliecabs Thanks a lot!
@luigiesposito4543
4 ай бұрын
Ciao. Come. Si chiama L adattatore grande ? 😊
@pauliecabs
4 ай бұрын
Ciao. Che adattatore intendi? Dimmi a che punto del video si trova e controllerò. Oppure mandami una email.
@kevinmatthews1264
5 ай бұрын
I also have a 97 and can not get it to connect... I'm about to pull my hair out!
@pauliecabs
5 ай бұрын
Have you tried multiecuscan.net for help?
@luigiesposito4543
4 ай бұрын
Adattatore. Al. 5.15 minuti. ? Kkl ? Come si chiama?
@pauliecabs
4 ай бұрын
Ho aggiunto per te i collegamenti per i cavi nella descrizione del video.
@uroskostic8570
2 жыл бұрын
You should have volume up the music, and speak more quietly
@pauliecabs
2 жыл бұрын
Thanks for your comments. It's been a challenge to get the sound levels right. I've started using a microphone in recent videos so hopefully things will start to improve!
@DoubleYouPee1
Жыл бұрын
Looks like you ordered the VAG KKL USB cable, did you have to install any drivers for this as mentioned on the gendan website? I am too wondering whether you can reset the airbag light with the free version of multiecuscan. From one of the comments it looks like it's possible.
@pauliecabs
Жыл бұрын
The Genden product code is VAGUSB. Sorry can't remember exactly which drivers I used but I remember it being a bit fiddly. I might do another video sometime of the just the software installation from scratch. I think the free version will reset the airbag. If the seatbelts have pretensioners I think you will need to use paid for version.
Пікірлер: 64