Thanks for sharing but I wish you would have included how you setup your PIA Container! The link to the video by craft computing shows him setting this up as a VM not a CT.
@jjsmitto
2 жыл бұрын
Fantastic! Super helpful video. You sorted out a few of my problems and now everything is working great!
@LoResDIY
2 жыл бұрын
Great to hear!
@nihoniumog5185
3 ай бұрын
hi, i've tried your setup, on the vpn provider lxc container, it worked. the ip changed and all. however when i try to use it on another container, via the gateway, it doesn't work. the curl command just not responding to anything.
@Henri2492
2 жыл бұрын
Just a quick note: With the latest ProxMox 7.x version the line "lxc.cgroup.devices.allow: c 10:200 rwm" has to be changed to "lxc.cgroup2.devices.allow: c 10:200 rwm" so "cgroup" changes to "cgroup2", because of the new default cgroup version in PVE7.x. It took me a complete evening to figure that one out. Without the change to "cgroup2" the /dev/net/tun device is created but has no permission to be used from within the lxc-container since the wrong group is used and thus openvpn throws errors and does not connect to PIA. The changed line fixes this.
@LoResDIY
2 жыл бұрын
Thanks for sharing
@wahwuhRAW
2 жыл бұрын
Thank you so much kind sir. Your input helped someone!
@Kryotek7
2 жыл бұрын
Thanks, you helped someone else out
@autoentropy
5 ай бұрын
how about proxmox 8?
@mrhashbrowns
Ай бұрын
@@autoentropy I know its been 4 months but for Proxmox 8 use cgroup2 as well.
@MarcelodeSouzaSilva
Жыл бұрын
I used the tutorial and everything works perfectly. Thanks! But I'm wondering, is it possible to use this same container to make external access to my network?
@JeffOwens
2 жыл бұрын
Thanks. I just found your channel and subscribed. Setting up my homelab and a new Plex server instead of doing thing manually. All of this will help.
@LoResDIY
2 жыл бұрын
Thanks for the sub!
@joshanders
2 жыл бұрын
Thanks for the video and Lets go Blues!
@LoResDIY
2 жыл бұрын
You Bet Lets Go Blues!!!
@hajunkie5820
2 жыл бұрын
I set this up and the container is behind the VPN and showing an IP that is given by PIA VPN. I cant get my client machines to connect to the container and get internet access. I have put the IP of the VpN as my gateway. I am using proxmox7 did the steps and built 3 containers with same issue. does anyone have any tips? I was trying to use a Debian 11 template with no success. I used a Debian 10 template and it is working now.
@p20ph37
2 жыл бұрын
I'm having the same issue. He glossed over the "just set the gateway and it works". This doesn't appear to be the case for me either.
@mintypockets8261
Жыл бұрын
@@p20ph37 Did anyone figure this - I can get the VPN to work, I'm unsure what the gateway address is. I've tried the IP of the VPN container, I've tried my gateway - all with no joy.
@mintypockets8261
Жыл бұрын
if you look @3:31 in the video you can see the gateway of the server -it's just the IP of the container (.72). That said I've tried this and the other containers hang when I try to check the IP address (routing it via my OpenVPN).
@JoeLaGreca
Жыл бұрын
This video was great! Thank you. I wondering if anyone knows how to accomplish this same thing, but using a docker container?
@markdickey7807
Ай бұрын
if i get this working - how do i have another container connect through this?
@AburaGamer
Жыл бұрын
Downloading movies/series/music or software isn't illegal. The uploading is, in most countries, what is not allowed
@johanneshepperle8390
2 жыл бұрын
Great video and exactly what I was looking for, a simple vpn gateway. Also works with unraid in a VM
@LoResDIY
2 жыл бұрын
Great to hear!
@IvoPereira
2 жыл бұрын
Loved this! Going to make it too
@LoResDIY
2 жыл бұрын
Hope you like it!
@ahlooii5432
3 жыл бұрын
Dear Lo-Res DIY, i would like to first thank you for all the content! It's very helpful and great! However there's one culprit i faces. If i were to first deployed my VPN first and then deploy the iptables rules, it would worked. However, i dont understand that the systemd service we use, it's deploying the firewall first then the vpn. Which to me is abit confusing because my LXC simply unable connect to the vpn because iptables will block if it's not a tunneled VPN connection. But how can it be possible to connect to VPN when the first rule is deploying the iptables, and it blocks all connection that is not already a vpn?
@LoResDIY
2 жыл бұрын
I believe you will need to turn off the firewall for the container. Let me know if that works.
@MatthewCrofut
3 жыл бұрын
does it need to be a privileged container?
@LoResDIY
3 жыл бұрын
yes mine is a privileged container
@aHondaAccord
Жыл бұрын
what if there are no existing config files in /etc/pve/lxc even though I have running vms?
@jewlouds
Жыл бұрын
there wont be anytihng in the lxc folder unless you have containers. a VM is not a container.
@aaro_n
3 жыл бұрын
Now I'm curious how you have a dark proxmox theme. My r610 is dang near identical to yours at this point because of your videos
@LoResDIY
3 жыл бұрын
Follow this link and follow the instructions. github.com/Weilbyte/PVEDiscordDark It's quick and simple and I'm glad the video's are helping
@doc_ineeda_win5834
2 жыл бұрын
pia takes a paid subscribtion?
@LoResDIY
2 жыл бұрын
Yes it does
@monicahernandez3216
Жыл бұрын
hey im getting the following error when try to connect to the vpn: " Temporary failure in name" this is only happening after i run the iptables command, before that i can connect to the vpn without issue, anyone can help me?
Пікірлер: 56