What is the benefit of using the speakermanager instead of just setting up HPF and LPF and maybe Delay on the 2 matricies?
@Chaz_r
Жыл бұрын
NICE!! Thank you
@timothyg9638
10 ай бұрын
Please Do Videos in Allen and Heath SQ6
@MarcBowyer
Жыл бұрын
Is there a reason why you are using Matrixes on the Wing and not the 4 Mains out? I get it on the X32, but it seems more logical to just use the separate Main outs.
@GuillaumeLortie
Жыл бұрын
With the new updates and integration of Pre/Post option like on other Bus for send, I would keep them for effects send or even extra IEM bus send. Your absolutely right about it been the same results it’s just more practical to use Matrix for outputs
@Takeiteasy11
Жыл бұрын
I love using main outs for subs I can specifically assign instruments with low end & not worry about other instruments bleeding thru
@chrisjay3026
Жыл бұрын
With 4 mains I use them for processing . Main sub deep sub and online. Of course they could be used for other purposes if needed.
@minghsunTsai
Жыл бұрын
There are some benefits to use 1 Main with Matrixs : 1. Because there is only 1 large LED meter onboard to show mixing level, using 1 main makes this LED meter show the mixing level, that makes mixdown level more reliable. 2. On show, you wouldn't want to control 4 faders to adjust mixing level, and using Matrix to balance Bass, Mid and Treble frenqucy, that is more efficient.
@orchestrefreeson
3 ай бұрын
Pour reproduire ce qui était fait sur la X32 et que Drew avait expliqué, il suffit d'aller directement sur M1 (LR) puis sélectionner l'EQ. Sélectionner "SHV" puis "Settings". Choisir "LO BAND" : LR 24 dB/Oct"(close). Ensuite, choisir 100.2 Hz comme FREQ L. Pour le SUBS, aller sur M2 puis sélectionner l'EQ. Sélectionner "SHV" en bas puis "Settings". Choisir "HI BAND" : LR 24 dB/Oct"(close). Ensuite, choisir 100.2 Hz comme FREQ H. Voilà qui est fait et c'est sans latence ! To reproduce what was done on the X32 and what Drew had explained, simply go directly to M1 (LR) then select the EQ. Select ‘SHV’ then ‘Settings’. Choose ‘LO BAND’: LR 24 dB/Oct"(close). Then choose 100.2 Hz as FREQ L. For the SUBS, go to M2 then select the EQ. Select ‘SHV’ at the bottom, then ‘Settings’. Choose ‘HI BAND’ : LR 24 dB/Oct"(close). Then choose 100.2 Hz as FREQ H. It's done, and without latency!
@grayancyagra5334
Жыл бұрын
Do you only do video for berhinger brand? Not for other brand like Studiolive III, Yamaha, Allen & health?
@godspromiseonyenwani2405
Жыл бұрын
Hi Sir, i wanted to know, can the x-touch be connected to s16?
@chrisjay3026
Жыл бұрын
Good info. I just use my eq on the matrix and high/low pass
@AudioEmpire1
Жыл бұрын
❤❤
@abdulnasar1662
Жыл бұрын
Watching your vedeo in oman (middle east)
@lo-filivesound1595
Жыл бұрын
I love your videos but you explain too much could you make it more simple pls? God bless
Пікірлер: 16