As an electrician why in god's name would anybody need taps that were twisted 5 inches. These videos are useless for sure
@WiCapitalco
Жыл бұрын
Because hourly paychecks
@moosesimpson8625
Жыл бұрын
Not to mention you could twist them with the pliers he used to cut them. Ive been twisting with my lineman for 20 years and won't he drilling out any bolts anytime soon.
@Spencer-wc6ew
Жыл бұрын
To be fair, it does look satisfying to have them twisted so tightly and perfectly like that.
@dz2635
Жыл бұрын
Read title
@Chris-ip8pz
Жыл бұрын
Maybe needs twisted 5 time lol
@brickshotted
2 жыл бұрын
Now, just cut the gas line, set a timer for the circuit and that's a wrap
@WillButtlerYeets
2 жыл бұрын
69 likes. I can't like it or it gets ruined. _Balanced, as all things should be._
@patolol3091
2 жыл бұрын
100th like
@j.rjunior5584
2 жыл бұрын
@@patolol3091 169th likes
@hopebagel6345
2 жыл бұрын
@@j.rjunior5584 I'm the 169th like
@colbytaylor8121
2 жыл бұрын
@@WillButtlerYeets you tried king you tried
@kzdm5255
2 жыл бұрын
The tool tips need to show how they're used in a practical setting. To me, this guy is professionally shorting circuits in record time!
@thenakedcableguy
2 жыл бұрын
For demonstration purposes I'm sure, showing how it twists two wires together for a wire nut but it's using the drill with more steps, just use an empty chuck on the wires.
@gabrielrodriguez8383
2 жыл бұрын
So true
@lordawesometony2764
2 жыл бұрын
It looks pretty though
@gabrielrodriguez8383
2 жыл бұрын
@@lordawesometony2764 yes sir it does
@AutodidactEngineer
2 жыл бұрын
@@thenakedcableguy or twist them with pliers like everybody else
@Lord_Baphomet_
Жыл бұрын
Should be titled: “How to prank whoever services the machine your working on”
@newadeganesh4286
Жыл бұрын
Wav
@REzado63
2 жыл бұрын
You can just put tie wire in the chuck without anything else
@amerisand7326
2 жыл бұрын
That was my thought just close down the chuck on the two wires you want to twist
@tecticeditz5549
2 жыл бұрын
Its satire
@Gunzee
2 жыл бұрын
You think he's stupid, he's a professional. Just think for a second, without spacing the wires wouldn't have uniform twist.
@dznuttzonyachin7499
2 жыл бұрын
@@Gunzee and you sir are the genius in this thread 🏆 excellent point !!
@spiderreed350
2 жыл бұрын
Nah,it won't grab good.
@SkillfulScott
2 жыл бұрын
You know you can skip that whole first step and put the wire in your drill after you remove the drill bit and spin it without the bolt
@DanLoFat
2 жыл бұрын
Nope I've tried that and it doesn't work you just get a tangled mess
@SkillfulScott
2 жыл бұрын
Yep only trouble I’ve had was spinning the wire to much good video tho 👍
@jbfarley
2 жыл бұрын
@@DanLoFat that's because you're incompetent. Thousands of people do that every day with zero issues
@fxstar7048
2 жыл бұрын
@Kristoffer Smith thanks for the laugh 😂
@tweeleaf
Жыл бұрын
currently waiting for Funk FPV to react to this.
@nrtg6290
Жыл бұрын
He already did didn't he
@hockeyologist
Жыл бұрын
Or you could just stick the wire into the end of the drill, save some time
@LaggingDuck-
Жыл бұрын
Model tank making taught me this haha
@davidrogers8321
2 жыл бұрын
Ahh yes it is very useful to have your Live and Neutral wires touching each other...
@jwalker6260
2 жыл бұрын
Works like a charm too
@sheenlee1715
2 жыл бұрын
He's showing an example of how it splices lol.
@devherrick5775
2 жыл бұрын
You don’t put black to white??!?
@amerisand7326
2 жыл бұрын
Just an example of its use.
@anthonyjmeli
2 жыл бұрын
White and black do not always mean positive and neutral.
@rust_hunter7867
2 жыл бұрын
"Now presenting the short ciruiter 3000!"
@SayAhh
Жыл бұрын
Johnny 5 is ALIVE!
@choco-latte608
Жыл бұрын
At this point you should weld the bolt to the drill too just to make sure it doesn't slip
@Sammy-dz2hk
Жыл бұрын
Another cool tip you can try at home is holding your breath, really really long, like, an hour
@newtybot
2 жыл бұрын
Y’all really don’t know what “useless” means It clearly has a use. You mean “redundant”
@wienersmcbutts
2 жыл бұрын
Kind of like your need to explain things.
@newtybot
2 жыл бұрын
@@wienersmcbutts Thank you Wieners McButts
@shannonpelley3217
2 жыл бұрын
Wouldn't it have been quicker just to put the wires in the end of the drill to twist them and forget about the bolt?
@danalbert6
2 жыл бұрын
Yes.
@999owlfate5
2 жыл бұрын
I used to ride bulls and thats exactly how i would twist the wire for my spurs. The bolt is a waste of time 😂
@joeram92
2 жыл бұрын
Yup. That’s what we do to car audio wires too. Use a drill.
@delicenemteanu6482
2 жыл бұрын
Fantastic amazing procedure before drilling
@ForbiddenLinks
Жыл бұрын
And he wonders why the fuse box keeps tripping...
@christopherlowry375
2 жыл бұрын
What a fantastic way to create a direct short between your hot and neutral. Thanks for the tip!
@miladinseratlic4565
2 жыл бұрын
Wtf are u talking about?
@christopherlowry375
2 жыл бұрын
@@miladinseratlic4565 basic principles of electricity. Go ahead; plug that wire in and see how fast you trip a breaker or burn a house down.
@miladinseratlic4565
2 жыл бұрын
@@christopherlowry375 BS! It's not live and neutral bcs there is no BLUE wire but Black and Brown! This is only example for junction box how to fast twist "LIVE" conductors for extension from lets say switch to light or from fuse to power socket. And ofc no one would connect two different phases together.
@alexward1003
2 жыл бұрын
I feel like tooling a bolt is beyond most peoples level of motivation. I think this is a bit much
@maniestoltz2414
2 жыл бұрын
A bit much.. no pun intended hey?
@walkamassie5788
2 жыл бұрын
I couldn’t imagine having to work on some wiring that someone did this too
@thetruthexperiment
Жыл бұрын
I think it’s just supposed to be a bracelet.
@joelitterio9594
Жыл бұрын
I couldn’t imagine working with this man
@alexryherd9810
2 жыл бұрын
It's not that hard to twist sing strand wire, this just makes it more complicated
@Caden_Howell
2 жыл бұрын
That tool is made for lazy people I'm guessing
@silvervens
Жыл бұрын
For some with gloves or wires sooo small that it would be hard to twist with. I'd say this tool is useful for uses during severe conditions when hand movements are limited.
@EagleFang48
Жыл бұрын
I didn’t realize they used 18 gauge romex in China for AC.
@thenakedcableguy
2 жыл бұрын
Why not put a small bend in the end of the wire and then directly in the drill chuck? The bolt is more steps....
@theSparkyWatts
2 жыл бұрын
Exactly, been doing it that way for 30 years lol
@thenakedcableguy
2 жыл бұрын
@@theSparkyWatts I figured it out when I got into vaping and DIY building my own coils.
@Geniusinventor
2 жыл бұрын
You know the drill to do the same job
@bumpsfarnorthnz6257
2 жыл бұрын
Good idea, but only usefull in certain situations when have time to lug around the extra tools
@thetruthexperiment
Жыл бұрын
3 likes? How? I’m speechless. I have no idea what to say because there are volumes objectionable to this statement.
@marcoantonioalcantarsanche8237
2 жыл бұрын
Jajajaja 🤣😂😂🤣🤣. Se mira bien pelada como si tuviéramos 3 manos jajaja 🤣🤣
@russelldelorey7348
2 жыл бұрын
Fuck I coulda done that faster with my Klein’s while you were drilling those holes lol
@zakimus
2 жыл бұрын
Well, I think they only have to make these holes once, so what's your point?
@seanwright8786
2 жыл бұрын
That's exactly what I say. None of us in the field would ever do this useless time wasting nonsense. Everybody that finds this fascinating are not electricians.
@russelldelorey7348
2 жыл бұрын
@@zakimus and then what? Pack a little fuckin 3/8” bolt with holes around with you all the time? Lol there’s a reason the wheel is still round bro.
@DanLoFat
2 жыл бұрын
Yep you sure could have. For one single time. So do you honestly think that he drills a bolt for every pair of wires he's got a twist together? Because if you think that, then your logic would be sound
@russelldelorey7348
2 жыл бұрын
@@DanLoFat I think you missed the point lol you’re obviously not a tradesman
@carpingfocus
2 жыл бұрын
Unless just get a pair of grips lol
@thomasrafuse7481
Жыл бұрын
You could literally use the drill you just used to drill to do the exact same thing
@jimmybaldino5026
2 жыл бұрын
The funny thing is that you don't need the drill to twist wires, and there's also already a purpose built drill attachment that does this pointless task. So this is double useless.
@jonathanviera3466
2 жыл бұрын
They make locking pliers that have a pull cable to twist the wires. They're a life saver and beyond faster than this garbage
@stovepipe9232
2 жыл бұрын
@@jonathanviera3466 What application would you twist wire in this manner shitteeth?
@JesusEstrada-wq9lv
2 жыл бұрын
I’d like a follow up video on what the HELL he connected that to…
@adamsmith5913
Жыл бұрын
No follow up video was found in the smoldering ashes.
@hellothere9167
2 жыл бұрын
This is exactly what I expect from someone who touches a few bolts and wrench every few months
@thetruthexperiment
Жыл бұрын
Can you elaborate?
@watungedoe
2 жыл бұрын
Great tip for a good housefire
@am6066
2 жыл бұрын
Where do you get those drill bits that don’t break under that stress?
@alotl1kevegas860
2 жыл бұрын
I'd like to know what drill bits your using to chew through a bolt that fast!
@unclebary1866
Жыл бұрын
They call it 4x speed
@robertkarlsson9353
2 жыл бұрын
Why?
@antarbhaichouhan9168
2 жыл бұрын
अंतर सिंह
@nerddub
2 жыл бұрын
Excellent, looking to shock the absolute shit out of yourself with your new tool, instructions follow. The coroner will be so proud of your crafts
@Eli-kl6by
Жыл бұрын
You are very good, can you add me whatsapp? + 852 51812384
@ToddReuterOutdoors
2 жыл бұрын
I’m just here to see you get roasted
@victoryT_T
2 жыл бұрын
:D
@eyadsmadi7802
2 жыл бұрын
What is the name of the first tool?
@frenchfry7640
2 жыл бұрын
We just call it a "punch".
@eyadsmadi7802
2 жыл бұрын
@@frenchfry7640 thank you 🌹, i found it as a "center punch"
@DanLoFat
2 жыл бұрын
The Holy Bolt
@chrisheatley706
Жыл бұрын
Ah, parallel conductors. The hallmark of any great housefire
@richarde735
2 жыл бұрын
it works great! I’d drill a third or fourth hole for bonding several neutrals or grounds together. using just the drill chuck is a real pita, plus you’ll need the other hand to hold the sheathing with the klein’s.
@bobstark4020
2 жыл бұрын
Most of these nimrods probably don't know the term Kleins so linesman pliers would probably work better. I'm guessing youre an electrician.
@dr.zoidberg5096
2 жыл бұрын
Just put the two ends of the wire in your drill. Does the same thing
@longrodvanhugendong9742
2 жыл бұрын
Now plug that into tha wall...boom instant heat 🔥
@adamsmith5913
Жыл бұрын
🤣🤣🤣this one really got me laughing
@foundfootagehorror
Жыл бұрын
Usually you attach one side to the drill and the other side to something sturdy. The drill spins the wires. Learned this in construction, most people in construction know it. No need to make a whole new tool for the job.
@bananza88
2 жыл бұрын
What kind of drill bit is that? I need one!
@Yan2Li
2 жыл бұрын
Просто берешь эти провода, вставляешь в патрон и точно также закручиваешь, без этой приблуды.
@norules7730
2 жыл бұрын
Ну такие очевидные вещи просмотров к сожалению не набирают
@GodexGaming
2 жыл бұрын
even though the wire can be clamped in the drill hole, you don't need to make other tools
@salinasantiago8544
2 жыл бұрын
Your video caused me Tenitus envoy with an invoice keep yah lawyers pockets moist
@gwankyguns2966
Жыл бұрын
great idea but yeah it’s just easier to tighten your drill around the wire instead
@NOOBNUT08
2 жыл бұрын
Ever heard of the "NASA", "lineman", or "Western Union" splice?
@Elraurko
2 жыл бұрын
Useless. Even in the event that they were shielded and weren’t creating a dead short you can still just tighten the drill chuck around the wires and twist them without the need of the bolt. Been doing it to shielded speaker cable for years.
@m4lik659
2 жыл бұрын
Exactly.
@1987FX16
2 жыл бұрын
You literally have to open the chuck of your drill to put the effin bolt it. Just put the wires in the drill and spin em like we've been doing for decades.
@Mr48two
2 жыл бұрын
Then you make the tip sharp, and you got another drill piece
@schaiidinho
2 жыл бұрын
O loop infinito que é foda 😂
@73778
2 жыл бұрын
👍 красота
@SparksFlyin
Жыл бұрын
They literally make crimps that can do what he’s trying to do without all that mess.
@imgonnagogetthepapersgetth8347
2 жыл бұрын
Now you know how to short household electric wire!
@DanLoFat
2 жыл бұрын
So you really think that was the purpose of the video. Well you're either hilarious or you're not understanding what the video is for.
@camelloy
2 жыл бұрын
TFW your idea of a useful tip for wiring begins and ends with destroying your property
@wandersgion4989
2 жыл бұрын
Always funny to watch people lose it in the comment section. 😂
@crestonperry2891
Жыл бұрын
What's that tac tac thing you do before drilling?
@beeters
Жыл бұрын
Lmao
@donready5259
2 жыл бұрын
They make wire nuts that do this for you. These types of “hacks” are ridiculous.
@user-ui7hu7tc8d
2 жыл бұрын
뺀치로 잡은곳 피복 까졌넹
@g-3609
Жыл бұрын
Google translate had a stroke lmao, or maybe you did?
@user-xq1cz7pf7e
Жыл бұрын
そういう結線が一番危険。無駄な事
@NopeRope84
Жыл бұрын
The most useful thing I seen was the punch to keep the bit from slipping
@frankh.3849
2 жыл бұрын
Thank God he twisted the bus and neutral wire together, I hate when they forget that step.
@user-hx1ju5px6z
Жыл бұрын
그런데 그거 왜 해?
@sns948
Жыл бұрын
전선끝 꽈배기 마무리 처리 하는거임. 대충꼬는것보다 단말처리도 깔끔하고 저렇게 해야지 처리한부분에 부하가 덜걸려서 열발생이 없어요. 그냥 만들시간에 공구를 구매해 쓰는게 좋을듯 비싼지도 않고 ㅋ 한두개 전선 마무리 할꺼면 그냥 플라이어 사용하는게 이득임 ㅎㅎ
@safe_side874
2 жыл бұрын
Thanks alot this idea will make my work easy ..
@dhavalpandya2748
2 жыл бұрын
Life is like a camera. Focus on what ‘s important, capture the good times, Develop from the negatives, And if things don’t work out
@sohansinghwatker9524
2 жыл бұрын
Gajab ki kalakari Dil❤️ se salam 👷👮👷👌👌
@rolo1344
Жыл бұрын
tool tip, just put the wires into power drill instead of making some random thing lol
@undercoverkindness5431
Жыл бұрын
The ol breaker Popper 😂😂
@literal_f22
Жыл бұрын
That would fall under the 'Useless' category.
@888WulfDog888
2 жыл бұрын
How to make an insurance claim!
@platinumgaming5763
2 жыл бұрын
Useful. You can make wire out of that. Wires transport power and power is useful
@electricocertificado4362
Жыл бұрын
Esa wea la hago con el puro alicate... Demás q usan pelacables 😂😂
@thetinman104
Жыл бұрын
You could also just feed the two wires directly into the drill the same way you put the drill bit in
@itzayushshort122
Жыл бұрын
Thanks I broked wire at 12 times😅
@ralfmalf5828
2 жыл бұрын
It's bad practice to twist solid core cables together like that as it weakens them
@joyfullyenjoy
2 жыл бұрын
What drill bits do you use??
@edendemarlo4402
2 жыл бұрын
Thats a great twist
@rolandyamel6376
2 жыл бұрын
I would think that safety wire pliers would be way easier.
@earthsgard
2 жыл бұрын
This is never used on site. EVER USED. THANK YOU.
@DanLoFat
2 жыл бұрын
B*******
@SgtJoeSmith
2 жыл бұрын
I'm lazy. I just use push on connectors
@renevillacorte9952
2 жыл бұрын
No
@tylerjones2281
2 жыл бұрын
This is a pretty dope idea though
@DanLoFat
2 жыл бұрын
Maybe for a three-way switch return
@justtisha
2 жыл бұрын
Also, what kind of drill bit works that well through metal?
@bobstark4020
2 жыл бұрын
Any relatively sharp bit will work as most bolts are not high quality steel.
@verounbhim3631
Жыл бұрын
How to mess with the maintenance crew
@kimberlypatton9634
2 жыл бұрын
That's the reasoning behind the necessity of "tools"..they are used for a specific job they are needed for,and it's a creative and intelligent person who can make one that they have a job for .
@donavanharris2179
2 жыл бұрын
For electrical engineers it's useful.
@bfdmanbfd
2 жыл бұрын
Or to save your save the work Just put both cables in the end of the drill and end up with the same result
@JW-gu9vy
2 жыл бұрын
Just buy safety wire pliers.
@user-ow1df5wb7r
2 жыл бұрын
why didn't they show the sequel? it's not for beauty, but for spot welding or soldering.
@rolandoguerrero9877
2 жыл бұрын
They sell wire twisters and by time you drill the first hole you'll be done
@mr.cuddles3834
2 жыл бұрын
Or you could just use linemans and twist them, but that's the joke. They're twisting a neutral and hot together, so it's just shorting out
@harryjohnson615
2 жыл бұрын
Strict no no. Great way to stress the cable and you wait until you need to separate that shit.
@obama6998
Жыл бұрын
Atleast use some oil or some sort of cooling man it hurts to watch when you drill into the silversteel
@sleeve8651
Жыл бұрын
I think you can do the same thing simply by placing the wire's in a drill chuck ! 👍😊 Just Say'n !
@puffinstuff1925
2 жыл бұрын
Good luck using that on 8 #12s. That’s why we use linemen’s
@magsantamaria4181
Жыл бұрын
You can also do the same thing by inserting the two wires in the drill chuck
@spvlogs2424
2 жыл бұрын
Beautiful sharing 👌
@doublestuf11-67
2 жыл бұрын
Safety wire pliers has left the chat.
@johnchapman9062
Жыл бұрын
WOW.....you can drill holes and twist wires. I also underimpressed.
Пікірлер: 1,3 М.