By far the best videos out there. Sad that there isn't more with Matrix 8.
@CADJewellerySkills
4 жыл бұрын
Thank you. I'm hoping next year to finally get around to building a new video series. In the meantime, I've made a list of my favourite video tutorials for various CAD programs on my blog: www.cadjewelleryskills.com/jewellery-cad-software-overviews-video-tutorials/
@AakashSings
4 жыл бұрын
Just wanted to let u know your videos are useful in 2020 too :)
@CADJewellerySkills
9 жыл бұрын
Mohammed al-sharif - I'm glad you like. In this case, the bezel shape you've made is no longer possible to use with the Cut to Finger Rail command. So you'll have to make another ring rail of the same size. Just add an additional ring rail, and when it says "do you wish to replace the existing rail?" click No. Hope that helps.
@CADJewellerySkills
10 жыл бұрын
VIV JY - The most common things which can go wrong on this exercise are as follows: 1.) You absolutely have to have a ring rail and a flat curve shape in the Looking Down view before hitting the Make Rail command. If you're missing the ring rail (or if your ring rail has been modified or broken) this will not work. Likewise, if your flat curve shape is not flat in the Looking Down view, this will not work. When in doubt, the best thing to do is to select everything, delete it, and start fresh. 2.) Once it's been made, if the custom ring rail hasn't been Rebuilt (with the Rebuild Curve command), the sweep you get from this shape will likely be broken into three pieces. This is because 1 rail sweep doesn't seem to like sharp corners. Fortunately, it's an easy fix (simply rebuild it). Give it another go and see if these help.
@kylie9420
9 жыл бұрын
Hi Jack, I like this. Also like the examples at the end it gave me ideas. k :)
@HangNguyen-cl2hh
5 жыл бұрын
It's so great
@heeeykaaay5628
9 жыл бұрын
This was great! You make it look easy...I know it's not...lol thanks!
@CADJewellerySkills
8 жыл бұрын
+Kalynn Perry - Thank you. That's why I did a video tutorial for this. But if you have any questions, feel free to ask.
@ErikaHamilton1
3 жыл бұрын
Hello, Your page is so helpful, your blogs amazing. One question Could I Use this program for design big size stones jewellery like semi-precious stones and different shape(Cabochons)?
@CADJewellerySkills
3 жыл бұрын
Thank you for the kind words. For cabochons, you can either build your own stones and settings manually (as I teach in my courses), or you can use the cabochons inside their own Gem Loader, which will work with the Bezel Builder with a bit of tweaking of default options.
@supannikakk
10 жыл бұрын
thank you .
@hondaconnection2005
8 жыл бұрын
I loved the video, and I left like and will be subscribing I will also be checking out your blog. Thanks for the resources.
@joancodina1
11 жыл бұрын
Nice !
@kurilladesign
9 жыл бұрын
NICE!
@imAwqard
10 жыл бұрын
Great tutorial, you should continue this series! Theres a limited amount of tutorials online for beginners. At the start I had no clue but now I understand the basic principles of designing in matrix! Could you make a ring from start to finish? or would that take too long to fit into a video? Thank anyway :)
@CADJewellerySkills
10 жыл бұрын
Thank you for that. You're right about the dearth of good tutorials online for Matrix. I've tried my best to collect what good tutorials there are onto my blog after I vet them. Have a look and see if this helps: www.cadjewelleryskills.com/jewellery-cad-software-gemvision-matrix/
@imAwqard
10 жыл бұрын
Ok mate, thanks allot!
@mohammedal-sharif9477
9 жыл бұрын
hi, thnx for amazing tuorial, but if i may ask how to cut the ring rail to match the bezel?
@CADJewellerySkills
8 жыл бұрын
+mohammed al-sharif - Do you mean how to get the ring rail to follow around the bezel? Or do you mean making an open shank where a bezel can drop in?
@mrwolf8440
8 жыл бұрын
i am trying to learn this tutorial...i got a problem on timing at 4:05 and trying to match 2 ring wires together to main rail. and for some reason i get (selection menu) window and i see 3 curve and none options to check..why i get this window? :(( thnx regards
@My_dream_zone
4 жыл бұрын
dear sir you have uploaded video in 2013.actually i have to learn from you the matrix9 .can i
@CADJewellerySkills
4 жыл бұрын
Hi Sheik. Sure. I have a course ready for any version of Matrix from version 5.4 onwards through 9, as well as MatrixGold. Contact me through my CADJewellerySkills website and I'll be happy to discuss training options.
@danny3man
8 жыл бұрын
hi, i`m new to rings and cad jewelry and i have a question: why is it necessary to add a bezel to this ring? won`t the stone be fixed in the ring`s arms ?
@CADJewellerySkills
8 жыл бұрын
+danny3man - Stone setters need metal to fold over the stone's girdle (widest point), as well as something underneath the stone with which to keep the stone from rocking back and forth. You could certainly embed some sort of side-wall into the arms, but you would still need a gallery bar underneath the stone to keep it from rocking around or shaking loose. If you're still not clear what I mean, talk to a diamond setter. Hope that helps.
@danny3man
8 жыл бұрын
+CADJewellerySkills yes i understand now. thank for replying
@CADJewellerySkills
8 жыл бұрын
No problem. Keep practicing. :-)
@elvintosun6801
8 жыл бұрын
Hey sir. Im thinking about going into this branch of design. I was wondering if you went to college. If not what type of training did you do? If you could get back to me, i will greatly appreciated.
@CADJewellerySkills
8 жыл бұрын
+Elvin Tosun Hi Elvin. It's a good question, and one I'm asked more often than you think. So often, in fact, I wrote a FAQ page to answer. Check out my answer here: www.cadjewelleryskills.com/frequently-asked-questions-part-2-getting-started-in-jewellery-design/
@elvintosun6801
8 жыл бұрын
+CADJewellerySkills really appreciate it. Thank you sir.
@phengsenghour7066
6 жыл бұрын
That web is not working now sir may you upload more videos on KZitem
@CADJewellerySkills
6 жыл бұрын
Hah. They finally took the old redirect down. We rebranded to the British Academy of Jewellery. Here it is: www.BAJ.ac.uk.
@vivianyuan3821
10 жыл бұрын
i can't do it
@jackchan3337
10 жыл бұрын
Hi Jack, Thanks for the tutorial. We are currently looking for experienced Matrix designer that are interested to work as freelance, therefore, wanna ask if you interest on that? Can you give us your email and go through the details? Thanks
@CADJewellerySkills
10 жыл бұрын
Dear Jack Chan: I'd be happy to point you in the direction of some of my students. You can find my contact details on my blog: www.CADjewelleryskills.com
Пікірлер: 36