Thank you for this video. I wasn't able to find any clear explanation on how to implement this product until now. You've opened up many doors for me.
@jamessturgeon7025
5 жыл бұрын
Really good demonstration of the two techniques. Thanks!
@Phantom-ff6zg
5 жыл бұрын
Thank you @Mike Clarke for this informative video.
@michaelbiloski3271
7 жыл бұрын
That is really cool, and looks awesome! I'm going to have try that with my NEJE.
@robinslater424
2 ай бұрын
Finally a video that gets to the point 🎉😊
@guyhanson4812
7 жыл бұрын
I like your presentation with text and video - thanks
@gwsearing
6 жыл бұрын
very cool, I'm going to have to try the foil.
@gilbertboyer9936
Жыл бұрын
Hey Mike, very nice video and product. Well done.
@foxa777
2 жыл бұрын
WOW, amazing work!
@davidk7544
4 жыл бұрын
This is the best raster v. vector example I've ever seen in my thirty five years' experience. Thank you for making this!
@robinslater424
2 ай бұрын
Totally
@Rulzan
6 жыл бұрын
Thank you for sharing,its awesome
@isettech
5 жыл бұрын
I find weeding much easier when using transfer tape. Weeding on transfer to transfer tape, then positioning and transferring with the tape much the same way stencil cut vinyl is transferred. Kiss cut the material with the backing still on it and pick it up off it's backing with transfer tape while weeding and apply. Transfer tape comes in various adhesion levels from low to high tack.
@robinslater424
2 ай бұрын
I've been doing transfer film forever... this w/o was a dream... #1 good weeding pen & tweezers
@cineik
8 жыл бұрын
Nice video Mike.
@user-xs9vq1xt3e
6 жыл бұрын
thanks for the video, I liked it
@robertgoodwyne6150
6 жыл бұрын
man thats just badass cool
@geraldallen7523
4 жыл бұрын
What an amazing Technology this is...!
@mfcrox
Ай бұрын
This is a great tutorial. All I could think whilst watching it though was "Jeez, this dude sounds like James Hetfield".
@fmeclarke
7 жыл бұрын
You can order laser foil from major suppliers such as Trotec or Rowmark. Not on EBay
@2009noushu
7 жыл бұрын
yes i want one
@2009noushu
7 жыл бұрын
pls send price
@straywelshone
3 жыл бұрын
Can not find any in the UK so frustrating
@nexan21
Жыл бұрын
@@straywelshone did you ever find any in the uk?
@harpindersingh7045
7 жыл бұрын
VERY GOOD MACHINE I LIKE IT
@fmeclarke
4 жыл бұрын
We sell it at Trotec Laser in Canada. It should be available from the UK location also
@straywelshone
3 жыл бұрын
Sadly not available in uk
@minitanksandchairs
4 жыл бұрын
I'd like to see what the raster etch looks like with all the foil removed. Does the foil mask so you get a matt-gloss contrast and if so, how much?
@fmeclarke
6 жыл бұрын
HI Peter. You do not need a lot of power as the foil is not much thicker than what is on a foiled piece of laminate. I always cut a sq and figure the power out. You can cut it without it being on any product
@marylynch8929
4 жыл бұрын
Nice. Thank you
@jerrysimeone
3 жыл бұрын
Where do you get this special foil from? Looks good. Wondering if it would work with my 3.8 watt diode laser. Thanks again
@RajenderSinghrangoliprinter
8 жыл бұрын
very...Nice..video....tnx
@gerritgeldenhuys2763
4 ай бұрын
A plucking tweezer work well for getting a hold once you've loosened a corner
@fmeclarke
17 күн бұрын
perfect suggestion
@viktorperalta3090
6 жыл бұрын
Hello thank you for this video by any chance do you have other video where you explain how to use the raster and vector in the laser . Im so confuse about what is raster and vector . I have a universal 40 watts
@ianstewart-koster9982
6 жыл бұрын
Try asking that question to Mr Google. It is a very basic one and it sounds like you need to do a lot of homework, before turning on your laser!
@KassyDee
7 жыл бұрын
this is so awesome! question.. can you do this on cardboard jewelry box lids? thank you!
@fmeclarke
7 жыл бұрын
The Sisterswood Probably not as it will not release off the plastic
@arifhasan469
7 жыл бұрын
can u pls et me know,what is the speed ,power & resoulation i have a 40 wat
@hondo1829
4 жыл бұрын
Mike, which Epilog machine are you using? Cost ? I’m in process of starting laser engraving/ cutting business👍
@rashid2145
6 жыл бұрын
what printing senting do yu use for the foil?
@lisaross3328
8 жыл бұрын
Great video and explanation. I love the machine. Could you please let me know from where I can buy this laser engraving machine?
@KassyDee
7 жыл бұрын
Epilog Laser
@twylarenia
7 жыл бұрын
Lisa Ross is he working with a CO2 or a Fiber laser?
@syon2009
7 жыл бұрын
CO2
@joerafferty5001
3 жыл бұрын
Get a pair of cotton pliers from your dentist. Really help pull off those small pieces when weeding.
@capnl
6 жыл бұрын
Hello Mike, Nice video !! Is the foil the same as used in a laser printer or laminator ?? Thanks
@ednerpatric7227
9 ай бұрын
Também gostaria de saber.
@howdydoody30204b
2 жыл бұрын
Great, and potentially useful, video. Thanks. I'm wondering, though, what sealer you use, if any, to protect the foil?
@fmeclarke
2 жыл бұрын
Hi Jere. Sorry been down for a month. This is just decorative so I did not use a sealer
@j0llyr0ger54
7 жыл бұрын
Just a tip, the metallized shelf paper at hardware stores is the same stuff, and way cheaper!
@TxDogblaster
6 жыл бұрын
It just has to be PVC free to avoid damaging the machine.
@CountDoucheula
2 жыл бұрын
Those self adhesive drawer liners are made from PVC. *Never laser engrave PVC* Aside from the gas it produces being poisonous, it will damage your laser.
@ghodd100
3 жыл бұрын
Would you link this item in the description please. I looked up laser foil and only can find it for laser printers only.. Not laser cutters.. Or is that the same stuff?
@silkysixx
5 жыл бұрын
Have you considered first etching the lacquer a touch underneath the full design, and then placing foil on top and running the machine even faster and cooler on the same path to just melt the gold into the groove made by the first pass? It's an idea I've been toying with in my head, to get that old school carved-and-gilded look.
@MentallFloss
5 жыл бұрын
Very good tutorial thank you Did you make the piano finish plaque yourself ? if so what paint or lacquer did you use ?
@wingmanmedia6536
7 жыл бұрын
I have done the same with vinyl, not sure if it comes in metallic finish but if it does how it will be different from this probably much more expensive foil?
@fmeclarke
7 жыл бұрын
Michael S Same Foil but this is laser foil which contains no PVC
@klausloffler2338
7 жыл бұрын
Hello Mike, I'm Klaus from Germany and I've detected your videos today. I must say, that they really gorgeous. What kind of material is the black piano finisch plaque? Thanks Klaus
@fmeclarke
7 жыл бұрын
Klaus Löffler Hi klaus St he plaque was provided by Caldwell Recognition in Canada
@yvestambo3125
6 жыл бұрын
Klaus Löffler questions yu ut tu hh Hnhmj J km gbcng Hjj oh UK Jjj lb uh fg
@ramonhamm3885
3 жыл бұрын
Nice work! What kind of laser machine do you have? My Glowforge Pro does engraving and scoring consecutively as separate tasks.
@fmeclarke
3 жыл бұрын
We sell the Trotec Lasers
@mariusdocea438
7 жыл бұрын
Hallo,nice video,what model of laser machine use ? thanks
@adrianbigs7034
7 жыл бұрын
Here is laser www.ielectronicparts.com/product-category/lasers/
@fmeclarke
5 жыл бұрын
Hi Richard. I am not sure on that one. It is a pretty thin foil so I would think so
@chips4289
5 жыл бұрын
do you have a link for the page with the actual foil. some of these sites are terrible to get around. I really want to try this..this is so cool
@fmeclarke
5 жыл бұрын
@@chips4289 Hi Richard are you in Canada or US
@chips4289
5 жыл бұрын
@@fmeclarke US
@fmeclarke
5 жыл бұрын
@@chips4289 HI Richard best to go to Laser Bits or Johnson plastics
@chrissre7935
Жыл бұрын
What foild brand is that. It looks thicker than the tranfer foil im using.
@mdsohail1421
5 жыл бұрын
Nice
@dickiewshort3587
4 жыл бұрын
Hello Mike, May I please ask, I do not have an extensive of a Laser that U do, But I would like to make this for a friend on a 4" X 4" Black Gloss Tile, What Program did U use to get the Final Outline around the LOGO, Thank you for any Info..
@fmeclarke
4 жыл бұрын
Hi Dickie. I normally work in CorelDraw. It is what was used to do this product
@sitgesvillaapartmentneilsc7924
4 жыл бұрын
does your bed go up and down to cater for the focal point of the laser? thats a thick piece of wood .... Nice whatever.
@lily.3560
2 жыл бұрын
Okay, laser bits. Thanks.
@chuckcrooks2114
4 жыл бұрын
My Epilog does not do raster and vector at the same time. It will do the raster job first, then the vector cut when in combination mode.
@Crits-Crafts
7 жыл бұрын
I actually prefer option 2. looks more premium to me... but maybe thats just me
@blairmelanson3110
6 жыл бұрын
Dan300891 -print&go- trump
@SouthernSwag731
8 жыл бұрын
Hi. Does Laser Foil contain PVC?
@yobennyo
7 жыл бұрын
Are you starting with vector graphics to do this? Thanks Benny
@fmeclarke
7 жыл бұрын
Hi Ben Sorry for the delay. Yes I was
@sally969
2 жыл бұрын
that is SWEET looking! will that foil work on ss tumblers?
@fmeclarke
2 жыл бұрын
Hi Sally it will but it is only decorative
@sally969
2 жыл бұрын
@@fmeclarkedecorative?so I won't be able to wash it?
@theskip1
4 жыл бұрын
do you have a product name for the foil. because when you just type in laser foil all that comes up is heat transfer foil for printers or iron on.
@tihzho
4 жыл бұрын
Search for cutting vinyls which have metallic foils or Amazon. www.amazon.com/Silver-Metallic-Laser-Foil-Foot/dp/B000UE737E
@stephensharma3259
3 жыл бұрын
where do u buy this laser foil from
@sphlouge
2 жыл бұрын
Mike Clark, I’m trying to locate a company to do this work. I’m in Florida. All the laser engraving companies I spoke to look at me like I have three heads. Any suggestions where I can find a company to do this or do you have a company that can do this. I’m a furniture maker (55 years) and always need engraving for various projects. Thanx
@gvrose1
7 жыл бұрын
Can you burn an image into a gold coin?
@darkracer1252
5 жыл бұрын
on this video it looks like the laser is comming from the air assist nozzle
@RobinsonHooi
4 жыл бұрын
does the foil sold in ebay?
@joshswenk1967
2 жыл бұрын
I’m guessing this doesn’t work too well with images or logos?
@verymeta
7 жыл бұрын
I'm 90% sure that someone was vacuuming while he was recording.
@jlo726
3 жыл бұрын
Can I use laser foil with a 45W laser?
@elliotsmith3676
7 жыл бұрын
have you used an Exacto Knife for this?
@fmeclarke
7 жыл бұрын
Elliot Smith No I am not very steady for that
@medwayspeedway2976
3 жыл бұрын
Can I do this with a diode laser.
@benjaminpastrana9662
2 ай бұрын
Specific supplier for the foil?🙌
@fmeclarke
17 күн бұрын
in the US go to Johnson Plastics or in Canada Trotec Laser
@dickiewshort3587
4 жыл бұрын
Thank you Mike for the Reply, I do not have that Program, Retired and can not afford.... May I buy a copy of your File...? Okay if not.... Stay Safe U and ur Family..
@fmeclarke
4 жыл бұрын
Hi Dickie. this logo is copyright so I can not do that. Feel free to visit www.brandsoftheworld.com
@dickiewshort3587
4 жыл бұрын
Thank You..
@dickiewshort3587
4 жыл бұрын
Okay, I have the LOGO I just can not get the Extra Outline around it like U did.... Thankx for Reply..
@fmeclarke
4 жыл бұрын
@@dickiewshort3587 Hi Dickie that has to be done in a program such as CorelDraw or Illustrator.
@fmeclarke
4 жыл бұрын
@@dickiewshort3587 You can draw the outline in a vector program. Sorry no other way to do it. If you have a Trotec in the print driver turn on Cutline and use Optimize
@cesararias3122
7 жыл бұрын
por fa cuanto vale
@darrenhawkes3416
5 жыл бұрын
What foil is it on ebay because its hard to find in australia
@chanxanlaserequipment4006
5 жыл бұрын
You can find us , the laser machine manufacturer in Alibaba and google . WhatsApp/Wechat: +86 18361445350 Web: lasermachinery.en.alibaba.com/ www.szchanxan.com
@irissalas6839
Жыл бұрын
What paper is it? Can it be used with any laser machine, Glowforge or LaserPecker?
@fmeclarke
17 күн бұрын
with those machines you will get brown edges on the paper
@lily.3560
2 жыл бұрын
What laser foil is this?
@mtphotoutah
6 жыл бұрын
How is this better then a metallic vinyl?
@fmeclarke
6 жыл бұрын
Hi Matthew The vinyl is typically PVC based which creates chlorine gas. I suggest you check for this. If not than you can use this also
@arielninio5955
7 жыл бұрын
how can I ask for this laser foil in ebay or in the maerket?
@fmeclarke
7 жыл бұрын
Laser foil is available from Trotec in Canada or one of the plastic suppliers in the US
@jaclyncliatt4811
2 жыл бұрын
Where do you get the foil transfer paper from?
@fmeclarke
2 жыл бұрын
IN Canada you can get it from Trotec. In the US try Trotec if not try JDS
@tihzho
4 жыл бұрын
So you're using your laser as a vinyl cutter. I wouldn't use your thumb to smooth out the edges use a soft rubber brayer so you don't catch an edge and pull up the foil.
@fivostsiplakis562
Жыл бұрын
What is the black material you stick the foil on?
@fmeclarke
17 күн бұрын
that is a piano finish plaque
@RyanNiemer
5 жыл бұрын
If you were going to do this, why not just use a vinyl cutter and apply the sticker to it? There are metallic vinyls that would look the same as this.
@fmeclarke
5 жыл бұрын
HI Ryan. Try you can do that but a lot of people do not have vinyl plotters so this is an alternative Cheers
@RyanNiemer
5 жыл бұрын
@@fmeclarke very true. I just didn't know if I was missing something haha. Great video though
@straywelshone
2 ай бұрын
Can't get this type of foil anywhere in the uk
@fmeclarke
17 күн бұрын
you can ask Trotec UK that might have it
@straywelshone
17 күн бұрын
@@fmeclarke no they don't stock it . Thankyou
@deenahulen3168
5 ай бұрын
Can you tell me where you got the Harley file from?
@fmeclarke
4 ай бұрын
brands of the world
@kellyleek9
7 жыл бұрын
why not just cut the foil first then stick it ?
@fmeclarke
7 жыл бұрын
If you place the foil on first and cut it this way than the line up is perfect. If you cut and than place it on you can lose registration
@cpace123
7 жыл бұрын
With enough practice, registration is pretty easy. A vinyl cutter is better suited for this type of work.
@allegrainternalwiki4646
6 жыл бұрын
When cutting the graphic on a plotter, cut the outline of the board and you will have instant registration.
@pir869
6 жыл бұрын
Registration is spot on if you don't mess with the registration,like the way YOU did it,the second raster and vector looks really good.
@chips4289
5 жыл бұрын
will a 2.5 w laser cut the foil?
@fmeclarke
5 жыл бұрын
Richard gross not sure the foil is thin so I would think it would work
@chips4289
5 жыл бұрын
@@fmeclarke yeah I saw a guy using a 6.5w laser at 25% so I think if I used my 2.5w at 85 to 100% it would work
@markjohnson8021
Жыл бұрын
Hi where did you get the laser foil from please
@fmeclarke
4 ай бұрын
you can get it from Trotec or JDS awards
@liquidrush4u
6 жыл бұрын
CO2 or fiber laser?
@dotslaser5253
5 жыл бұрын
CO2
@user-co1tv9vj1b
7 ай бұрын
Quedo cabron. Felicdades,
@BUZDRIFT
6 жыл бұрын
Or just make a decal, which is cheaper!
@pir869
6 жыл бұрын
But looks crappy
@CountDoucheula
2 жыл бұрын
1:38 Don't worry about any air bubbles? You sir, vastly underestimate my stupid OCD brain.
Пікірлер: 151