In this video, I show you how to add some flare to your wires and your electronics. I have no idea what I'm doing. Follow me on instagram / 24yep Merch at 24yep.com
This was awesome!!! The frustration and the learn as you go technique makes for great content, always keep your wire wrapped LOL!!! Rock on!!!
@EricsRC
2 ай бұрын
Lets all chip in and get this guy some new scissors ✂️ 🙌 😎
@24Yepp
2 ай бұрын
😂
@mattfranck7040
2 ай бұрын
Yes, I'm in for $1
@BillsWorkbench
2 ай бұрын
There is nothing wrong with those. :).
@arioch_sin2638
2 ай бұрын
I did this years ago to ear buds when they actually had a wire and plugged into something. Thinking about doing this on the new build. Happy to see someone else that thinks outside the box! 👍🏻👍🏻
@kickstart118
2 ай бұрын
Please upload more! I can’t get enough of this information.crunch time 0:39
@MasterApeFPV
2 ай бұрын
That is definitely the right way to remove wires from connectors. Should, when you push the wire back into the connector, the wire wiggle in and out, remove the wire again and raise the little lip carefully on the crip that is on the wire up with an exacto knife. Also: lovely smile 😂
@Scoobers-fj6jk
2 ай бұрын
That's cool I love this idea nice tire rack too 😂 thanks for sharing 👍
@bigdumbdad2226
2 ай бұрын
YO! This is genius! There's paracord in the Dollar Tree craft section in a bunch of colors, they have scissors too.
@danfosgett5154
2 ай бұрын
awesome Video, thanks for sharing. to shorten servo wires. get a JST terminal crimper and a 2.54mm jst connector kit off spamAzon
@BigDsRc517
2 ай бұрын
You learn something new everyday! You dont learn untill you try ....id probably set it on fire lol...i save my old servo wires ...cut desired amount and replace!
@ejg4069
2 ай бұрын
Loving these ASMR videos. So soothing.
@bwiese5387
2 ай бұрын
Awesome idea! Now I have to redo all my rigs!!...thanks alot. Keep up the videos
@JtcreekcrawlerRC
2 ай бұрын
Always awesome videos 🤘🏻
@TYLERLOVESBMX1
2 ай бұрын
Tape the wires to the inside piece of the paracord, then when youre pulling out the inner it will pull your wires through at the same time 👍👍👌
@davideliasen6993
2 ай бұрын
Awesome👍👍,You always put a smile on my face mate. I got some blue......if ya need some.
@TYLERLOVESBMX1
2 ай бұрын
We use paracord to wrap our mouse cables for gaming mice, makes them nice n flexable.
@mattfranck7040
2 ай бұрын
Nice! Having done something like this with paracord before I feel your pain! The best tip I can give is to Use a lighter and singe the ends to melt them. This keeps the tips together and they fray less while you are working with it.
@BillsWorkbench
2 ай бұрын
For the tabs. The easiest way I have found to remove the wires is to put the black plastic end in a vise, then use a knife to pry up the lock thing while gently pulling the wire.
@gvngoheavy
2 ай бұрын
paracord sounds a lot nicer than the plastic woven wire loom stuff I used to use. Wondering if you could take the servo cord to the core before you pull the core out so that it pulls the wires through at the same time? Kickin ass with the videos dude. Stoked for more build bios, youre building the sickest rigs.
@24Yepp
2 ай бұрын
There is definitely an easier way to do this for sure lol. Thanks man I appreciate it
@AKlivn
2 ай бұрын
Great hat!
@joepiper6064
2 ай бұрын
Just got mine in the mail today! Intime for 4/20 !🐻
@joepiper6064
2 ай бұрын
Hello my Friend ! Great vid ! I bought pins and pin plyers to make custom length wires. With your skill I know you can do it . Pease!
@24Yepp
2 ай бұрын
Sweet, I'll need to get some. Thank you!
@troypostie1252
2 ай бұрын
Bro the chips master🙏
@SixPHD
2 ай бұрын
droppin a thumb cause that heat shrink is crazy
@SivartCustomRCs
2 ай бұрын
Try fishing a McD's straw through the cord first. It's how I get it done with other wraps. Also, those connectors can be put back on.
@carsandfunnys5750
2 ай бұрын
The fact that u can make paracord interesting beyond a survivalist aspect of use !!! Hats off to u my friend 🍻 fuck ya
@nunocarneiro464
2 ай бұрын
Hilarious as always 😂😂😂😂
@NUeB_RCFPV
2 ай бұрын
Their pricing is ridiculous for the poor print quality they show on their website. 👎 Respect for what you made out of it!
@claytonrc259
2 ай бұрын
lmao!! Great video brother.
@Rc_nozza74
2 ай бұрын
Great video, 😂😂😂
@JamesDirtRC
2 ай бұрын
I use paracord as my Boot laces. :)
@superksnowman1621
2 ай бұрын
Day 5 of asking for you to show off all your cars ❤
@crashandcynder
2 ай бұрын
Off topic but I'm thinking of doing an scx24 with the delorean body from Playmobil
@24Yepp
2 ай бұрын
You already know I love this idea
@bigdumbdad2226
2 ай бұрын
Don't think, just do it!
@joshuamccreary9279
2 ай бұрын
Hey dad, pls do a short video of just silence and mean mug faces and eating!!!! !!!!!
@dnbcricket
2 ай бұрын
I had to pause to give YOU a tip.. super glue and cotton ball to build up new material and fix your scissors. Of course, you should follow appropriate safety measures when super gluing. We don't need another Edward Scissor hands running around, now do we?
@devonellis5327
2 ай бұрын
I wonder if he ran the lighter gently back and forth over the paracord would it shrink up a bit to the servo wires and make an even nicer finish?
@wingnutbert9685
2 ай бұрын
Cheap and easy to try! 👍👍👍
@drive-n-seek
2 ай бұрын
Trey, was that orange primer baja bug at the 1:00 also a playmobil? I like how you did the headlights on it, would love to see more.
@24Yepp
2 ай бұрын
Vt3k body, I'm planning on making a video soon showing it
@raymondborn1002
2 ай бұрын
Slide a sewing needle into the 3 that’s on the plug and they slip right out
@DustyFingersRC
2 ай бұрын
You can buy braided expandable PET sleeving wrap which would be easier. You can get it in loads of colours and pattens too and it wouldn't fray like that cord cause it is a specific wire sheath 👍🏻
@24Yepp
2 ай бұрын
Awesome!! What do I search for to find this? Or, link?
@gilgarcia5050
2 ай бұрын
@@24YeppAmazon,the 1/8” works best for 1/24 stuff,easier to work with too!
@DustyFingersRC
2 ай бұрын
Just search for this: Tight Braided PET Expandable Sleeving Wrap For Wires You can buy with in different internal diameter sizes. 👍🏻
@dattcten6798
2 ай бұрын
Day 4 of asking for a dungeon tour!😂
@dattcten6798
2 ай бұрын
Day 5 Of asking for a dungeon tour
@jdiaz8289
2 ай бұрын
I need to get me some orange lol
@troypostie1252
2 ай бұрын
Broke character lol so good
@xmonster313x
2 ай бұрын
You look so serious 🧐😅
@erikcastillo4254
2 ай бұрын
Why did you smell the inside of the para cord? 😂
@24Yepp
2 ай бұрын
I don't have a good answer for this 🤷♀
@user-Atamigaputer
2 ай бұрын
goose
@demantoid418
2 ай бұрын
Whatever it is that is wrong with you aint no little thing. 🤨 Yet another great vid thanks so much. 🫡
Пікірлер: 63