Sir, I want to thank you for a cohesive, easy to understand, well explained and no nonsense video. Something that is sorely lacking on you tube.
@geekazine
5 жыл бұрын
You are welcome. #Thanks for commenting!
@primetymepro
7 жыл бұрын
From my understanding and usage, the USB cable is not used for control. It is used to update firmware and access setup for initial configuration. USB cable not needed for the software operation.
@BFGDoc
7 жыл бұрын
Nice video, thanks! At 8:35 you mentioned that DSK 1 and 2 stands for Disk 1 and Disk 2. Actually, DSK stands for "Downstream Key", easy to confuse with the abbreviation used.
@geekazine
7 жыл бұрын
Good catch. Thanks!
@TheOlddeadEYE
7 жыл бұрын
nice to have seen a diagram or a view of your setup, rather than just your face and the black magic software for 25 minutes
@geekazine
7 жыл бұрын
You're welcome
@ToddMillerProductions
4 жыл бұрын
Great video but the title is a bit misleading in the fact that Wirecast is hardly touched on. I just built a system that uses Wirecast and the ATEM TSHD and was trying to figure the way to use them together
@geekazine
4 жыл бұрын
The idea that it's a single input to Wirecast, the input is what you had with Wirecast 6. Good news is - there are ways to make it more interactive, so you can really integrate WC and BM ATEM. #Thanks for the comment.
@Ramez468
8 жыл бұрын
Iam have atem and wirecast 6 how to put atem on wirecast and record from wirecast ????
@Sheriffvlogs
3 жыл бұрын
I have a question if u want to build a live streaming rack useing black magic gear to stream to KZitem Facebook twitch etc what are the exact equipment would you need it's a little bit confusing on how to send the the feed to stuff like you tube
@geekazine
3 жыл бұрын
There are a lot of ways to do it.
@Sheriffvlogs
3 жыл бұрын
@@geekazine how please or there a video explaining it
@gabakusa
8 жыл бұрын
nice video i got the same device ATEM do you have a tutorial , step by step how to use chromakey?
@tgard007
3 жыл бұрын
Thank you! Great video
@davidtrig
7 жыл бұрын
Does the encoding happen by the PC? If so and I want to have a separate encoder do the heavy lifting, what do u recommend?
@geekazine
7 жыл бұрын
The video signal is sent to a box that sends to the PC. You can use different programs to create the video file, from Wirecast, to Adobe Audition. The software ultimately records the video at a specific resolution. There are some hardware recorders out there, too.
@Swingpointmedia123
7 жыл бұрын
We have the ATEM Television Studio Switcher, will it work with wirecast in the same way?
@geekazine
7 жыл бұрын
Yes. You still need something like the Intensity series to bring it into the computer.
@Swingpointmedia123
7 жыл бұрын
cool, thanks for getting back. We are using a Magewell dongle now, so this will make it so we can connect yes? thanks
@geekazine
7 жыл бұрын
Haven't used one, but it looks like it will do the job.
@fronterasdesuenos1893
7 жыл бұрын
Hi Jeffrey, a hug! I have the Blackmagic Design ATEM Production Studio 4K, and unfortunately I can not work animated graphics, because the switcher will not let me. Is it possible to work with Wirecast and Atem Studio 4K hardware? I would like to do it, could you show me how? Thank you very much!
@geekazine
7 жыл бұрын
Absolutely! I have the 4K as well. I run all animated graphics through Wirecast using NewBlueFX Titler. Even the basic titler will give you some fun options.
@fronterasdesuenos1893
7 жыл бұрын
Excellent, it's a great relief to hear that. But exactly what is needed to be able to connect the atem with the wirecast? If you're so kind, could you explain it to me in more detail? I connected the output of the atem to an avermedia c875 capture, and from another computer I send the animated wirecast graphics, but it has a fairly large delay, and I find it difficult to do some live transmission. I would like to see how you do it, to be able to do it too. Thank you for responding, a hug!
@fronterasdesuenos1893
7 жыл бұрын
:(
@yeriksl5775
8 жыл бұрын
where did you buy your headworn mic?
@ChristopherWrightKR
6 жыл бұрын
I am having trouble finding the link for software. Do you have direct link,?
@geekazine
6 жыл бұрын
If it's not on their support page, I am not sure.
@ChristopherWrightKR
6 жыл бұрын
It is. I found it with some help.
@ChristopherWrightKR
6 жыл бұрын
I am using PC. So it appears I need I router to go any further. Plugging Cat5 from PC to Blackmagic doesn't work
@geekazine
6 жыл бұрын
It can. You need a "crossover cable", and knowledge to set up IP addresses.
@MrEndoftheRoadRC
4 жыл бұрын
Why even mess with this? Wirecast can do everything this box can without the cost.
@geekazine
4 жыл бұрын
There are many reasons why. Biggest one is if you need to add more cameras. I can set this unit up on a stage, set up 8 different camera angles, then bring it back to the computer where I put in 3-4 more. Wirecast can do a lot, but there are limitations. If you overwork your computer, you could find it not working when you need it most. If you're a 1-2 camera shoot, then Wirecast is perfect. People are getting more and more complex with their systems, nowadays.
@DIALFMMHz
5 жыл бұрын
gwestiwn helo ffrind oherwydd nad yw'r usb yn cydnabod bod ATM BlackMagic wedi gweithredu'r holl yrwyr ac wedi bod yn profi barios cebl ac mae'n amhosib ei gydnabod hefyd rwyf wedi bod yn profi gyda chyfrifiaduron eraill ac nid yw'n mynd
@geekazine
5 жыл бұрын
ok
@DIALFMMHz
5 жыл бұрын
Podría ir porque el USB no funciona en el BlackMagic ATEM ya que ha estado probando varios cables y es imposible que siempre se produzcan errores.
@sabeergo8033
6 жыл бұрын
Plz Requested All Atem Production Studio 4K Users Allowed Video Media Player Support Video Formate separate Key opp Plz Support Frdz
@geekazine
6 жыл бұрын
what?
@derickmcwilliams8089
6 жыл бұрын
Hard to trust anything you say after you stated INCORRECTLY that the USB is required for software control. Learn then teach.
@geekazine
6 жыл бұрын
Back in 2016, when this video was made, the ATEM switcher needed BOTH cables to configure and then use the software switcher. Later updates of the firmware changed that. I believe the USB cable is now only used for software updates, but I haven't used the ATEM in a while. Summary of your snide comment: You should get all the facts before you try to berate someone on the Internet. Have a nice day.
Пікірлер: 40