You are very talented. It's a joy to watch you engrave.
@kristibbradshaw
27 күн бұрын
Wonderful tutorial. Thank you.
@karenlaorange354
9 жыл бұрын
I really like your technique and I will have to give it a shot. A really fine demonstration. Thank you.
@jimbettridge3123
9 жыл бұрын
Just great art! Very well done art and vid Chris.
@talalkavita
10 жыл бұрын
You r a real artist.
@erosangelos9422
4 жыл бұрын
Nice work and great technique ) I enjoyed it!
@gravirovka63
4 жыл бұрын
Thank you so much, MAESTRO!!!🙏
@wadewilson5296
5 жыл бұрын
I wish I was this talented
@joshuaherrera8285
9 жыл бұрын
You sir are a wizard
@entertheoutworld2364
10 жыл бұрын
majestic ! you've got skillz.
@Schmalzgau
9 жыл бұрын
Amazing!
@PLINKER
Жыл бұрын
Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
@anarchylane
11 жыл бұрын
so nice!
@TheMotoben
11 жыл бұрын
Really nice, thanks.
@davidlowrie579
9 ай бұрын
Beautiful tight work.
@havocmaverick
5 жыл бұрын
Looks nice
@rogergarcia3021
3 жыл бұрын
Nice Fing job, good video
@annab.6706
8 жыл бұрын
Bravo you are artist
@ehsankhalili6761
Жыл бұрын
Nice work 😍
@frednurks7858
10 жыл бұрын
Gr8 Work. Im curious as to what type of Microscope to use. You go in close and then go light on Magnification. Your thoughts? Regards, Michael
@nicolajhansen7232
9 жыл бұрын
Amazing
@mrchristian1954
11 жыл бұрын
Thanks for the kind words.
@tamsunaskarstass7637
4 жыл бұрын
Hallo! What is the material of who you graving? And what is the graving tool name?
@annh3599
5 жыл бұрын
I would get so addicted to this if I had the tools!
@owaisqarni6935
5 жыл бұрын
You can make one for under 65 dollar. KZitem "Shaun handmade engraving machine".
@alierem4266
Жыл бұрын
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece. Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
@giovanniruggiero622
8 жыл бұрын
what's the name of the tool?Thank you....amazing work.
@farukhmirzoboshiev6186
5 жыл бұрын
Wow you the best
@Guds777
Жыл бұрын
Interesting stuff...
@asanoen1777
4 жыл бұрын
Very nice .....
@pierdolio
5 жыл бұрын
I wonder, what material are you engraving? Is it copper, gold, brass or something else?
@josejuangarciaalfaro2928
8 жыл бұрын
Gracias Por compartir
@sorin990
10 жыл бұрын
great stuff, can I ask you how do you hit that ? is it electrical ? o_0 (this is very new to me)
@bluemoon7378
3 жыл бұрын
@Jake Thejeweller thanks for the advice jake.really helpful,could you recommend some metal to sharpen for engraving stainless?have a project :)also could you recommend some tools to buy that id need?
@427yenko67
9 жыл бұрын
Nice work...i can hear by the knocking of your graver that it seems like you have yours turned down quite a bit more than i was taught..your approach seems a lot more forgiving. I think I'll turned mine down and see if i can be more controlled...question..what do you do about burrs that are kicked up..? Thanks for the video..I always enjoy watching someone who knows what their doing. Thanks again for the video.
@apex.amatuer
7 жыл бұрын
This is an EnSet engraver. They are the most expensive and different to other engravers like the graver max. With the enset you can go as low as one single hit by itself at a time.
@jayprakashsoni197
5 жыл бұрын
Where can I buy this engraving tool. Please provide me a link for this if possible.
@christofer8954
8 жыл бұрын
Are you using a light weight for this?
@trekranger
8 жыл бұрын
with a pneumatic engraver do you have to push the graver or just control the blade?
@allenl9214
7 жыл бұрын
trekranger depends on the kind of system.. some are foot controlled while some are activated by pushing palm.. both are very easy to handle and requires little to no puahing.. just control the graver speed up or slow down as you wish
@Sanjeewa.Subasinghe
2 жыл бұрын
Can you provide us a website to purchase a good compressor for GraverMax
@travismorgan7315
Ай бұрын
what graver are you using?
@bigyo9225
5 жыл бұрын
很漂亮,刻刀也与众不同
@skiboyscuba
9 жыл бұрын
Where should one start if they want to start learning engraving?
@apex.amatuer
7 жыл бұрын
First you need at least 5000 dollars lol
@venchilla96
6 жыл бұрын
not true actually, I got my engraving ball brand new for about 500 and gravers can be bought for a decent price if you are hand engraving. You can even find deals on ebay for some non GRS brand engraving balls.
@owaisqarni6935
5 жыл бұрын
You should look for Shaun's handmade engraving machine instructional.
@j2k4201
11 жыл бұрын
Where can I get that tool and for how much?
@Bb186fo
3 жыл бұрын
From the thumbnail i really though you were tryingnto engrave hairy human skin lol
@salvatorerametta2558
9 жыл бұрын
anyone know where I can get an engraving system like this for around 100$? dont want to risk so much money as im just starting
@apex.amatuer
7 жыл бұрын
Look up Shaun Hughes engraving he has videos showing how to make one from things you can buy on ebay for around 100 dollars. Even then though this is no cheap hobby.
@sannasydolai8165
3 жыл бұрын
The pusher machine name please
@sannasydolai8165
3 жыл бұрын
Rate of push machine
@mukhumor
5 жыл бұрын
It would be helpful if he showed us his machine.
@flawlessreactionswithmary6948
7 жыл бұрын
he did great if you agree like
@mrchristian1954
11 жыл бұрын
Go to engraver.com
@badrakhariunchimeg1031
4 ай бұрын
haha
@ska69360
10 жыл бұрын
hi awesome job man... what kind of engraver is that and where could I get it?
@mrchristian1954
10 жыл бұрын
It's called the Enset. You can get more info at engraver.com
@salvatorerametta2558
9 жыл бұрын
Christian DeCamillis are there any systems that are around 100$? I am just new to engraving and I dont want to risk so much money at first
@mrchristian1954
9 жыл бұрын
Thank You. The tool is the Enset it is a pneumatic driven handpiece and controller that is used as an assist to your hand work. Unfortunately there are n systems in that price range. The best option is to look for something on the used market.
@timothypsaledakis8693
8 жыл бұрын
+Salvatore Rametta Look at 'Hand Push' engraving. A sharpening stone, a steel graver and a mayonnaise jar lid full of pitch to secure your work in can get you started.... Keep bandages handy as slips with push engraving often result in blood being drawn. Old time engravings were done this way, as there were not power tools hundreds of years ago....
@charlesbleile5282
6 жыл бұрын
That's correct but don't try hand pushing in hardened gun steel. That is where air powered gravers or hammer and chisel come in.
Пікірлер: 64