I only have reflap0.lp and not reflap1.lp. Help. Never Mind. Fixed it! thanks for the tutorial SBP
@SBPVideoChannel
4 жыл бұрын
This a list of all the commands available for the reflap utility: (Keep in mind that this tool can only be activated in Testing Mode!!!) Quick Reference ------------------------- Enable/Disable reflap editing ctrl-shift-alt-` Toggle stashing alt-r Save working reflap to disk ctrl-/ Splice/copy to working reflap / Set start splice point [ Set end splice point ] Clear splice points \ Decrease smooth time ctrl-"-" Increase smooth time ctrl-"=" Select previous AI line ctrl-[ Select next AI line ctrl-] Copy from AI line ctrl-\ Toggle temp/work lines ctrl-` yellow/orange Toggle AI race line ctrl-0 green Toggle AI min race line ctrl-1 dark green Toggle AI max race line ctrl-2 dark green Toggle AI pit0 line ctrl-3 red Toggle AI min pit0 line ctrl-4 dark red Toggle AI max pit0 line ctrl-5 dark red Toggle AI pit1 line ctrl-6 blue Toggle AI min pit1 line ctrl-7 dark blue Toggle AI max pit1 line ctrl-8 dark blue Toggle AI min/max panic lines ctrl-9 purple
@kermanite
4 жыл бұрын
Is there any way I can contact you?
@SBPVideoChannel
4 жыл бұрын
@@kermanite What is it that you need to contact about?
@kermanite
4 жыл бұрын
@@SBPVideoChannel I was wondering if you could make LP Files for me cause I can't do it.
@SBPVideoChannel
4 жыл бұрын
@@kermanite What is that you are not understanding? Could possibly try to explain.
@kermanite
4 жыл бұрын
@@SBPVideoChannel all of it
@anthonyf.3009
4 жыл бұрын
I managed to figure out to start the reflap and get the orange and yellow triangles. But I'm pretty confused. The first line you were setting was the minrace, and I was doing that too, for Las Vegas. But what was the orange line for? Also, what's splicing and time smoothing for?
@SBPVideoChannel
4 жыл бұрын
The orange line is the working (or temp) line to where the yellow line that you create gets saved to after use the ctrl-/
@SBPVideoChannel
4 жыл бұрын
The splicing allows you to cut an area of the line created in the yellow in an effort to splice it to another line. This feature, along with the smoothing commands, do not get used all that much. it usually comes down to creating a whole new line in an effort to fix any problem areas of a previously created line.
@anthonyf.3009
4 жыл бұрын
@@SBPVideoChannel Thank you!
@anthonyf.3009
4 жыл бұрын
@@SBPVideoChannel So I made a new minrace lp file, but instead of saving the yellow line I created, it saved the orange line instead
@anthonyf.3009
4 жыл бұрын
@@SBPVideoChannel I just found out why it was only saving the orange line, I have to press "/" before I save, I now have 3 and 4 wide racing at Las Vegas! I just need to fix the maxrace so it doesn't force the cars to collide with each other off of corners
@SBPVideoChannel
6 жыл бұрын
Tutorial vid pertaining to setting up racing wheel for stashing as mentioned in this video tutorial: kzitem.info/news/bejne/qaGep3iLq3qpiKw
@DaPh2495
4 жыл бұрын
Unrelated to the video, but where did you get the MENCS menu at 0:47
@SBPVideoChannel
4 жыл бұрын
That can be found at our newest venture, Spline Design Studios, splinedesignstudios.com/SDS_main/SDS_main/index.php/component/jdownloads/category/3-nascar-racing-2003-season?Itemid=104
@zandylovesrisk
3 жыл бұрын
I have two questions: I'm doing Pocono90 and going into turn 1 when racing side by side, the inside car will drive down onto the apron and eventually slow down and either get loose and slid up causing a car to go high and cause an accident, or just slowing down the cars in line behind it. Is that panicline or maxline? Second in my Talladega1993, after a few green flags laps, the cars get bunched up and are running 3 wide a few rows deep and even 4 wide which is leading to some accidents. Can i fix that using Lps? I downloaded both tracks from nr2k3 so may differ from the OG creators.
@j_rocknation
3 жыл бұрын
Honestly, most of those issues are going to be INI related. If you have modified the 'papy_ai' INI in the core files of the sim that might cause these types of issues, as well as in the track INI sections for AI itself.
@zandylovesrisk
3 жыл бұрын
@@j_rocknation Checking the ini's for the Poconos, didn't see huge difference in the ai_track or ai_cts settings.
@j_rocknation
3 жыл бұрын
@@zandylovesrisk But has the papy_ai INI in the core directory been modified? If it has, that will also effect AI behavior in the tracks own INI ai sections.
@j_rocknation
3 жыл бұрын
Can always try to apply new LPs to see what result is gotten. Be sure to backup the original LPs so have those to revert, if necessary.
@alexandermunozmz3809
7 жыл бұрын
It happens that by doing the key combination "ctrl-atl-shift - ???" we do not know which key is the "~" so it does not work. could you show which keys you use? in a photo or another video? maybe let us see the combination of keys you use. and another question I tried to subscribe to your "SBP" page and do not leave me I am from COLOMBIA and I continue your work long ago you could help us thanks, thanks to your videos I learned to use the SANDBOX :) this writing is translated I hope you understand me :V
@SBPVideoChannel
7 жыл бұрын
The translation does make sense, thanks ;) As for the key combination, this might help: www.dropbox.com/s/e21r6idm9374h50/reflap_key_combo.jpg?dl=0
@nephenthal7275
Жыл бұрын
Do you have a document that tells us the keys for all the options to Reflap?
@SBPVideoChannel
Жыл бұрын
Can find that here: splinedesignstudios.com/SDS_main/SDS_main//SBP/NR2003_Files/Editing/NR2003Edits.htm
@SBPVideoChannel
6 жыл бұрын
At 1:31 is where tutorial starts
@Arod15sf
Жыл бұрын
so about saving pit lane lps do i just rename the pit lp or is there a key command for it. thanks
@SBPVideoChannel
Жыл бұрын
If you have created new LP files via the reflap tool then you can simply rename the respective reflap0.LP, etc... that is created to the proper name(s) for the pit LPs wish to have.
@Arod15sf
Жыл бұрын
thanks a bunch now if only someone would make an engine sound mod tutorial XD@@SBPVideoChannel
@SBPVideoChannel
Жыл бұрын
@@Arod15sf hope you find it 😉
@tamezzodiac2862
2 жыл бұрын
How do u button map to wheel?
@SBPVideoChannel
2 жыл бұрын
Check the description for video link on how to do that 😉
@SBPVideoChannel
2 жыл бұрын
@@tamezzodiac2862 You can play around with the ai_line_modifier in the [ ai_track ] section(s) of the INI to adjust the LP's created. Just keep in mind that these lines aren't meant to be set to extreme values. Only use small increments (e.g. .01 to .05) at a time and then test in-game. If need be, create a new LP(s) as needed to compliment the adjusted [ ai_track ] section(s).
@isaacgaming2176
6 жыл бұрын
Where did i can get that layout?
@SBPVideoChannel
6 жыл бұрын
Not sure what you are asking. Could you please be more specific?
@jsmr451
18 күн бұрын
Nobosy knows what you're talking about. 🙄
@Zak103tv
3 жыл бұрын
Can this be done in single race
@SBPVideoChannel
3 жыл бұрын
The reflap utility can only be enabled inTesting Mode
@Zak103tv
3 жыл бұрын
@@SBPVideoChannel ok
@Zak103tv
3 жыл бұрын
@@SBPVideoChannel will it work if there is not any lp files
@SBPVideoChannel
3 жыл бұрын
@@Zak103tv It absolutely will !! This is the main purpose of the reflap utility is to create LP files for a new track creation, which would essentially have no LP files to start with.
@Zak103tv
3 жыл бұрын
@@SBPVideoChannel ok thx
@alexandermunozmz3809
7 жыл бұрын
como hago q funcione en un teclado Español??
@SBPVideoChannel
7 жыл бұрын
Sorry, not sure about a Spanish keyboard, if that is what you are asking
@jbernfinger5494
4 жыл бұрын
@@SBPVideoChannel Damn I also was looking for it
@SBPVideoChannel
4 жыл бұрын
@@jbernfinger5494 Looking for what?
@jbernfinger5494
4 жыл бұрын
@@SBPVideoChannel the same as Alexander Muñoz Mz but i've found a way: just install the english keyboard in the pc and use the same key of that position
@SBPVideoChannel
4 жыл бұрын
@@jbernfinger5494 As long as you figured it out ;)
@TheEgg185
6 жыл бұрын
1:55 Ctrl Alt Shift WHAT?
@SBPVideoChannel
6 жыл бұрын
Realizing for some reason there was a reply to this same question already. It does show if sort the comments, but here is the image shared of what keys are being pressed: www.dropbox.com/s/e21r6idm9374h50/reflap_key_combo.jpg?dl=0
@TheEgg185
6 жыл бұрын
I didn't know that's what it was called. I never took Spanish in school, so most people, who did, will probably think I'm a dope for not knowing that.
@japotak99
6 жыл бұрын
SBP Video Channel still have no idea what you said
@TheEgg185
6 жыл бұрын
lebron's bitch - "Ctrl Alt Shift Tilde". Tilde is apparently that squiggly line on the top left corner of your keyboard under escape.
@HPayne62
6 жыл бұрын
Tilde. ~
@alexandermunozmz3809
6 жыл бұрын
en caso de que te entregue una pista "PHOENIX 2018 new " editada por mi.. me harias el favor de hacerle unas lineas de carrera para la IA? es que cuando movi la "linea de meta" se movieron todas y se dañaron.."" me haces el favor de hacer unas para mi "?? yo te paso la pista que estoy haciendo. gracias.. :) """""""""In case I give you a track "PHOENIX 2018 new" edited by me ... would you do me the favor of doing some career lines for the AI? is that when I moved the "finish line" they all moved and were damaged .. "" You do me the favor of making some for me "??? I give you the track I'm doing.Thanks .. :) """ I hope you understand why what I speak to you I translate to English"
@SBPVideoChannel
6 жыл бұрын
We have created the video to help those to create their own custom AI lines (LP files) for their own track builds. If there is more explanation needed, then PLEASE let us know and we can help explain it better ;)
Пікірлер: 68