Without a doubt, one of the most useful YT videos about the MA-40. Short, and exactly what I needed to see. Let me also say that Mike was a prince! When I asked to pick his brain for info he called me and let me benefit from his experience. Even gave me a lead to a local P.E. Thanks bunches Mike. 73 de Warren, W1WRM!
@TheMultisportGeek
Жыл бұрын
What I would do is teach my wife or daughters to run out there to crank that thing up. They’re food motivated so the training should be fairly quick.
@Gruuvin1
Жыл бұрын
Especially if you withhold the food for a couple days before you need some work done.
@daddyflip8584
2 жыл бұрын
Count three cranks; two in the foreground, one behind the camera. Haha! Good work guys!
@MarcosRayol-wk5yf
6 ай бұрын
Marcos py7mjs . Muito bom ! Brasil. Pe.
@GhostCenturion
3 жыл бұрын
Wow that is nice!
@Barracuda48082
5 жыл бұрын
Add a counter weight pulley setup to assist ??
@michaelholden8667
2 жыл бұрын
I would luv too have one of them do you no were I could purchase one and how much would something like that cost any information would be greatly appreciated bye the way its awesome great job I would like that for my I max 2000 or put me up a set of moon rackers number eights it just so convenient any information would be greatly appreciated Mike Holden out of north Carolina said that thanks again great video
@mikeynags
2 жыл бұрын
Give Ham Radio Outlet a call. That's where I purchased mine. I know the costs have gone up but they should have the latest on pricing
@n1ksf
Жыл бұрын
Figures you have one!, been looking to set on up here or something similar
@JA-fy1bn
2 жыл бұрын
I need 3 of those. Nice!
@narquattslagg9708
2 жыл бұрын
It looks like you have the MARB-40 rotator base and the MAF-40 raising fixture. Do you have to remove the MAF-40 in order to rotate the mast? it looks like the mast winch could hit the MAF-40.
@mikeynags
2 жыл бұрын
Yes - I removed mine. I have seen where people remove only the top bolt and "lean" the MAF-40 back and out of the way of the raising winch. It was easy enough to remove and I think looks better with it put away.
@bensharp575
7 жыл бұрын
Just curious how deep the base hole was? Be a BIG helo.
@mikeynags
6 жыл бұрын
3 feet by 3 feet by 5 feet deep.
@trazosdetuberiaconcalculad7249
2 жыл бұрын
Good jobs
@Max-kn9yi
2 жыл бұрын
What's this thing going to hold, wind turbine?
@gordonblank6845
2 жыл бұрын
HF antennas I would think.
@pinkwontons
6 жыл бұрын
Gun shots at 0:24
@mikeynags
6 жыл бұрын
there is an outdoor shooting range in the area
@davep6977
5 жыл бұрын
You don't have it up and transmitting and the neighbors are all ready shooting at you :)
@jeremyd5298
5 жыл бұрын
Is the MARB base moving from the weight when you crank up the Ma 40?
@mikeynags
3 жыл бұрын
no, it is rock solid attached to the cement foundation
@DanielOrtegoUSA
7 жыл бұрын
I'm considering the MA40 unit as well. Very helpful
@mikeynags
6 жыл бұрын
I'm very happy with it so far. It will be 3 years this spring.
@DynoDieselWagon
2 жыл бұрын
Impact driver on nut . Alot faster
@joeearley3351
3 жыл бұрын
Gee my god is that pipe that heavy to swing up and bolt in place come on man.
@mikeynags
3 жыл бұрын
you should have been there to get it off the truck when it was delivered!
@joeearley3351
3 жыл бұрын
@@mikeynags wow hope you had help. Nice should last a long time.
Пікірлер: 31