THIS is what the original IS should have sold with, an optional 1UZ 290hp V8, so it could actually be taken a little more seriously as a stock performance sedan, instead of the aging n/a 215hp 2JZ as the top option. Nice work.
@timbraithwaite6524
10 жыл бұрын
the uz engine available at the release time of the original IS sedan was not this engine which is rated at 290hp ,,,this is the later variable valve timing 1uzfe engine the only UZ engine avalable at that period was the 1UZFE which was only rated at 256hp
@Slovflyer
10 жыл бұрын
Tim Braithwaite that is incorrect. The 4.0L vvti 1uz was in production from the 1998 Ls and Gs 400 models with 290 and 300 hp respectively. In 2001 they moved those two cars to the 4.3L 3uz which made a bit more torque but had lower emmissions, but kept their Hp same. So an '01 IS430 would actually have been possible were it not for marketing strategy, etc.
@DK88z
9 жыл бұрын
Slovflyer thanks :)
@copeland102211
8 жыл бұрын
+Slovflyer can parts from the 3uz replace parts on the 1uz I've heard rumors about it saving money and would like to know thanks to anyone with a answer.
@killabyt3
8 жыл бұрын
Should've had an optional turbocharged i4 also
@lemalu91
10 жыл бұрын
Love it man. Power to weight ratio...awesome.
@LogicalGentleman
12 жыл бұрын
i was waiting to see somebody do this mod good stuff
@nicholaslangley1716
6 жыл бұрын
That looks like a tight fit. props
@PiotrTester
8 жыл бұрын
great sound Enriching - tests and opinions
@aklbruce
13 жыл бұрын
hi bro, good to see all those parts back to together, nice job~! Tom here
@kaijugamingtv663
8 жыл бұрын
man i love this
@RyanUkAus
11 жыл бұрын
There's a few guys who have made immobilizer bypass solutions for the original Toyota / Lexus factory ECU's, after over a year of searching finally got mine bypassed. Thanks for the advice regardless!
@robsnizzle7
2 жыл бұрын
Bro, I love that you used the top cover damn thing looks stock.👌😎 I love this mod more an more I see it..... really making it hard to keep my '05 IS300 a 6cyl.
@jicez6649
2 жыл бұрын
I said the same thing and then I pulled the trigger on a gs400 engine, can't wait to swap it in my is300
@RobertMoua
11 жыл бұрын
Thanks! im gonna look into that.
@TooColdS4
12 жыл бұрын
that thing sounds so ballsy, wish my is300 sounded like that
@cebastienlarochelle8182
8 жыл бұрын
its a pretty nice setup. is it bolt-on with the engine mounts and transimission? thanks! :)
@reneeblithe6441
11 жыл бұрын
now thats cool,roughly how much did the conversion cost?do you still have the car?am in wellington and looking to do the same to my altezza,but with a 3uz
@shanerogers1110
8 жыл бұрын
aww I want a v8 in mine
@e36sam
10 жыл бұрын
Holy fuck that's epic.
@DK88z
9 жыл бұрын
thanks :)
@GAG4IT
12 жыл бұрын
wesome conversion! What did you find the hardest having to do in THIS conversion?
@lemurzastylemur
10 жыл бұрын
hi, please tell me, what gearbox u used? is it manual or auto? was it a lot of work, or just plug&play? sorry for my english, and greetings from IS200 user from Poland :)
@jamaicanlovrboy
11 жыл бұрын
thats a nice swap
@ryanmoloney99
10 жыл бұрын
Cool swap bro was it much hassle to get your gauges and dials working looking to do the same to my road car any info would be great
@tannersword1
12 жыл бұрын
what problems did you run into with wiring? what year of Altezza and 1UZ? Also, using factory w55 trans?
@HORiSTYLZ
13 жыл бұрын
Hey bro im in progress of building a altezza I was gunna 2j it until i saw 2many of them around and I like the V8 Sound do you have any ideas on the wiring and maybe some pictures Thanx
@squoblat
11 жыл бұрын
hello, did the standard exhaust manifolds actually fit in the car?
@twidge
13 жыл бұрын
im actually looking to do a swap with a 3uz-fe... do you have a write-up or pictures of your build up anywhere?
@SomersEmcee
13 жыл бұрын
Awesome mate, correct me if I'm wrong, but isn't this a 4L if it's a 1UZ, even being a late model?
@RyanUkAus
11 жыл бұрын
G'day, swapped a 1UZFE vvti into my 4runner, immobiliser won't let it start :/ how did you get around this?
@SomersEmcee
13 жыл бұрын
Awesome mate, correct me if I'm wrong, but isn't this a 3UZ-FE?
@funguy7979
11 жыл бұрын
They should make a drop in kit for this build.
@JohnnyThunFilms
10 жыл бұрын
omg im in love
@DK88z
9 жыл бұрын
thanks :)
@tristesskartoffel8677
9 жыл бұрын
BAD ASS...;)...Well Done!!!
@DK88z
9 жыл бұрын
thanks :)
@NZcarBlog
4 жыл бұрын
nice is it mated to the j160 manual gearbox?
@DiRollin
10 жыл бұрын
THAT SOUND.
@DK88z
9 жыл бұрын
thanks :)
@Shishizurui
11 жыл бұрын
i wanna see one swapped in a prius, that is my dream car.
@GAG4IT
11 жыл бұрын
i wouldve thought it was easier than tryna get Certed in Oz (Brisbane) AWESOME job though, based in Auckland?
@bigenginesismythang
12 жыл бұрын
man your crazy lol very nice swap though
@jamelboy20
3 жыл бұрын
How long did the build take
@FGCTekken
11 жыл бұрын
Are you using th stock ECU?
@slideways89
8 жыл бұрын
What did you have to do to for the automatic transmission sensors on the Ecu without having a check engine light?
@DK88z
6 жыл бұрын
Wesley Hammond hi it required an aftermarket ecu in the end..
@875daily
10 жыл бұрын
yea very nice swap...
@Nztimr33
10 жыл бұрын
fuck yeah!
@toshiros7264
7 жыл бұрын
you got a build log?
@Pratchaya21081
11 жыл бұрын
Altezza RS400
@DIRTJUMPERZ308
9 жыл бұрын
Im thinking of doing this to my 2004 toyota altezza, where did you get engine mounts to suit the 1uzfe? Cheers and please reply!!! =)
@DK88z
9 жыл бұрын
thanks :) - engine mounts were altezza mounts - just had to get spacers for the rubber mounts made from steel like 20mm to lift the sump off the cross member. then I was away laughing. mounts didnt break. make sure you get a 1uzfe vvti front sump motor yeh. contact me if need be.
@legacyrsme
13 жыл бұрын
awwww mate now youve really done it to me now farken meeeeeean,im the guy who txtd you a while back stating i wanted this so badly but the Mrs wouldnt let me have it cause we have too many toys,although if i won the 32 million lotto this week a txt will be definately coming your way so watch this space lol
@pocketkiriyama
10 жыл бұрын
I heard the 1uzfe vvti uses a drive by wire throttle is this true? If it is, how did you get around it?
@jeramieramasir
5 жыл бұрын
No they dont its cable
@LacoteCohen
10 жыл бұрын
Oh shit!
@DK88z
9 жыл бұрын
thanks :)
@pushmamramisto1393
9 ай бұрын
Is it thirsty?
@875daily
10 жыл бұрын
IS400
@funguy7979
12 жыл бұрын
lexus is with a 4.7liter in it would be nice, even nicer would be the 5.7.
@bradelwell5616
8 жыл бұрын
What loom did you use for this?
@DK88z
6 жыл бұрын
Brad Elwell original sxe10 loom
@DK88z
6 жыл бұрын
And original 1uz loom
@MiCRoX9
6 жыл бұрын
what modification have you done to the engine?
@DK88z
6 жыл бұрын
Hi no modification to the engine but it's not original , I custom installed it
@88mattdogg
12 жыл бұрын
@deanbassist01
10 жыл бұрын
Love it, just a pointer though, you say its a 1UZ IS430... but it would be a IS400 if its a 1UZ 4.0l... or a 3UZ which is 4.3l would be IS430
@xcalic3600
11 жыл бұрын
Gear stick looked pencil thin. First time seeing one like that.....
Пікірлер: 79