I know everyone is making fun of there working area and tools but you know what I see.. A dad and his 2 boys doing something together and imagine if they had a fully stocked garage how badass they be.
@radiumdude
3 ай бұрын
That engine will probably blow up after a few miles. a fully stocked garage still doesn’t make these guys a trained engineer/mechanic… light years from it. The difference is easy to spot: look at your infrastructure and infrastructure in these parts of the world.
@187A1
3 ай бұрын
@radiumdude if engines were blowing up like you say then there wouldnt be shops for them to be rebuilt. Fact of the matter is these engines will run for million miles as they do.
@lv7603
3 ай бұрын
@@radiumdudeengine will be fine don’t be so melodramatic.
@MrLunary
3 ай бұрын
Its not middle east, it is south asia, Pakistan. Otherwise child labour comment is true. Really bad working conditions for them.@@zachking566
@coffeepot3123
3 ай бұрын
It's not the western wholesomeness here, the child helps out because it's expected when you live in near death poverty. On the maslow's hierarchy here it's not "I get to work with daddy!", it's "fuck i hope we get work tomorrow so we can get three meals that day". This romanticisation of people living in dire poverty has to stop.
@40vtr
3 ай бұрын
Now this makes me feel comfortable dropping my lawnmower spark plug on the gravel and installing it without blowing it off 😂😂😂
@simonww04
3 ай бұрын
😂😂😂
@MooseMeus
3 ай бұрын
haha
@stevesalt2921
3 ай бұрын
😅😅😅
@fuzzjunky
3 ай бұрын
the way he pried the head to fall off straight on the ground with such disdain. 1:40. and this dude throwing this fuel line in the sand lol. it all feels so wrong. 1:10. but it's the ring spanners i don't get. socket sets are pretty cheap and all.
@adirondacktrekking1972
Ай бұрын
RIGHT !! 😂
@ITRIEDEL
3 ай бұрын
The little kid smiling at the end when it started up. High five from the USA, buddy!
@helinick81
3 ай бұрын
Priceless smile ! Awesome learning Curve!
@jogie63
3 ай бұрын
This guys are really good. But I would not bring them an AMG C63 engine 😊
@chunhaylee
3 ай бұрын
You know that kid is going to grow up to be an awesome mechanic
@horacecomegna335
2 ай бұрын
@@jogie63They’d fix it cheaper and faster than you or your company could with a warranty! 😂😂😂
@jamesdean3432
2 ай бұрын
from South Korea, buddy!
@LT1210
3 ай бұрын
Torque wrench? We don’t need no stinking torque wrench!! What better place to build an engine than in the dirt. I gotta say though, the kid in this video has got a way better work ethic than most 20-30 year olds I know.
@Mr.HotRod
3 ай бұрын
If he don't help out *work hard") he probably DON'T eat. Lot different philosophy then what we are use to.
@campervanzoso
3 ай бұрын
Torque is set depending on the weight of the guy swinging on the spanner.
@JS-zb1vv
3 ай бұрын
Everything is fixable! Not in western countries because they government says you need a degree and 5million permits and the make the auto makers build stuff that only lasts 100k miles.
@djjokerssss
3 ай бұрын
That's enough NM "trust me I know what I'm doing....I've been working at this for a long time..." NOT DIE ENGINE
@jimpovolish540
3 ай бұрын
I thought the same thing!
@fabioarrua
3 ай бұрын
you know it's cold when you see sneakers and socks instead of the usual sandals. The X2 voices sound just like JAWAS working hard.
@MazziniMK
3 ай бұрын
the 2x jawas voice is true! hahaha
@wilmh9586
2 ай бұрын
HAHA Jawas hard at it....bless them they did a sterling job
@LebonezerScrooge
3 ай бұрын
Orange vest homie didn’t stop moving for that entire video. Non stop working. Would love to have him on any team of mine.
@brielgaplur4260
3 ай бұрын
looks like , you want to exploit him... thanks God i am not in your team !!!
@LebonezerScrooge
3 ай бұрын
@@brielgaplur4260 you wouldn’t last an hour.
@pineira6304
3 ай бұрын
@@brielgaplur4260 so saying someone works very well non-stop and praising them for loving their job is now wanting to exploit XDDDDDD americans
@petermoto409
3 ай бұрын
@@pineira6304 No, he's saying that because he is likely being exploited and you seem to appreciate that. Also, this, and most of these, video is sped up. These people may work hard, but they work slow.
@DosDonts101
3 ай бұрын
He was good. And you don't need a workstation or any safety equipment for him either.
@xxsk83rxx13
Ай бұрын
As someone who is mechanically inclined and is restoring a 70's muscle car with a garage full of tools, I have to say it is crazy the amount of work they did with basic non-ratcheting hand tools. I get mad when I have to use a regular combo wrench to take something off now-a-days.
@bobdubolina
2 ай бұрын
Wow! 500 bucks. Just a little more than a cart full of groceries. Great job guys!
@d112cons
3 ай бұрын
The knowledge is always far more important than the tools. Outstanding workmanship.
@JerryMetal
3 ай бұрын
there is a right tool for the job and there is a wrong tool. Not torquing the bolts is bad practice but hey, if they only ask 500 bucks, well you get what you pay for.
@jacobnichols2182
Ай бұрын
They're loosening head bolts from back to front. They're lucky if the head didn't warp because that's not how you're supposed to do it 😂
@Nipdog
Ай бұрын
lol u silly
@Tjalle
18 күн бұрын
Throwing the injection pump in the dirt whit out plugs in the pump, do that to a new diesel truck engine and see what happens, that's not skills
@ronaldsimms-nh7dx
3 ай бұрын
Westerners can say what they want about child labor. The kid was the star of that show!! Learning life skills young is fantastic
@imthebestthingsinceslicedr5400
3 ай бұрын
Westerners with their mindset the whole world operates like how it is in their country. That kid will be a badass later in life with the knowledge he will accumulate rebuilding engines.
@gonzo2906
2 ай бұрын
An actual education would be better. He could probably stop living in poverty and move out of that dusty shithole with some schooling
@jamesbroomfield7799
2 ай бұрын
I wouldn't really call it child labor, that's probably either the guy's son or nephew or like the young kid is there to learn a trade at a young age cuz in that part of the world they're not really going to college like that when your poor like that so they're out there earning money or helping out just so they could learn at a young age
@ronaldsimms-nh7dx
2 ай бұрын
@@jamesbroomfield7799 Western assumptions... You assume those people are poor, why? They have on work clothes, doing work! Those "poor" people PROBABLY owned that entire yard and several others.
@Bewar3-rd3qh
3 ай бұрын
Real pro's at their job, not once did they pause to look for the missing 10 mm.
@11TruthAssassin
3 ай бұрын
like Canadian mechanics , every 10 min , yo man wheres that 10 mil ? hahahha
@jontorrie2212
3 ай бұрын
It's probably hard to lose a 10mm with a 4 foot bar welded onto it though.
@luishetzler9429
3 ай бұрын
Yup that 10mm gets you every time
@NOZAS-lb2db
3 ай бұрын
that me in everyday life
@jasonh.8754
3 ай бұрын
I've had my old socket set for years, and the 10mm is all beat up from use, and some of the sockets are still waiting patiently for that one time when they will finally be necessary...
@deuce38
2 ай бұрын
I rebuilt a 67 Mustang 289 with basic tools. Pulled it with a Sears come along and chain hung from carport rafters. Did take the heads to a shop for rework. As my dad said sometimes you have to just make do. Teamwork.
@Christofuzz-hc9xl
Ай бұрын
This is pretty cool. These guys are getting down with the business. Imagine if they had a better setup.
@mikeymjh
3 ай бұрын
Given the conditions these guys are working in, they do a fantastic job
@lauretiu
3 ай бұрын
man those torque specification cost money. about 6-10 grand more than the price of the whole rebuild in this video. and that doesn't even account for the snap-on or mac tools, we are talking just labor.
@slipperyslope5364
3 ай бұрын
Commenters talking about torque specs and everything else, however if shit ever it the fan and it will who do you want in your camp the guy who depends on the specs tools or the guy who the spec tools depend on. These guys are awesome, with a little they can do the impossible imagine with much what they can do. If I had a chop I would hire these guys and pay them they due. The work ethic is beyond reproach and the skills set the specs for the tool manufacturers. These men are the engine whisperers.
@Mechanical-Hands
3 ай бұрын
Absolutely, your comment highlights a crucial aspect of craftsmanship - the difference between relying solely on technical specifications versus possessing a deep understanding and intuition for the task at hand. The mechanics showcased in the video exemplify the latter, showcasing their mastery and adaptability in the face of challenges. In times of adversity, having individuals who possess not only technical knowledge but also the ability to innovate and problem-solve with limited resources can be invaluable. These mechanics demonstrate a level of expertise that goes beyond simply following predefined guidelines; they can improvise and achieve remarkable results even in the most challenging circumstances.
@daveph357
Ай бұрын
Engine whisperers...what a spot on phrase to describe these mechanic diva's, so impressed, and as for the young kid, what an education/apprentiship he is getting, especially in a country where this is quite probably no chance of a "normal education", and no, I am not being rascist, i'm just saying that these guys all work together, and they all have a smile on thier faces. As an "old school" mechanic, who grew up learning how to actually repair things rather than just chuck replacement units at any problem, I am in awe of the skill and knowledge displayed by these guys. An honour to watch them work, the best of luck to them all.
@dcdanger6151
3 ай бұрын
The smile on the kids face when it fires up, yeah I know that feeling 👍🏻
@doctoramrit9485
3 ай бұрын
People, working hard with whatever they have,to get food on plate and roof on head.salute..:)
@rdanda
3 ай бұрын
Fascinating, the only specialty tools are piston head holder and a spacer for knocks.... It's def in upwards of $5000 job up here in San Francisco, $500 just to power wash mud!
@retorq
Ай бұрын
That piston head holder is a ring compressor.
@user-wm3fc1sk1p
9 күн бұрын
@@retorq Wrong! That's a piston coating applicator
@retorq
8 күн бұрын
@@user-wm3fc1sk1p the tool shown at 21:34 in the video is a piston ring compressor, without a doubt.
@hermesjackle5903
Ай бұрын
My Dad was a old school Mechanic in the UK , Torque settings for the sump ,one hand. Torque setting for the heads , two hands. Well done lads you keep them lorry's going with limited tools.🛠
@argus9609
3 ай бұрын
These guys are ready to work at Boeing, they meet their QC standards.
@LichaelMewis
3 ай бұрын
Lmao
@MC-nb6jx
3 ай бұрын
Surpass you mean? We all saw them tightening the bolts up 😉🤣
@EvoSteve89
3 ай бұрын
They're not diverse enough
@carlosnogueiradacunha1414
3 ай бұрын
Então é que eu nunca punha os pés num Boeing.😂😂
@wayneb3193
3 ай бұрын
Right..bet they can get those abandoned planes running in no time..😅
@samsharif4768
Ай бұрын
Only "real mechanics" know the engine inside and out! Not just replace parts, but fix them!! That's talent!
@kslandin
Ай бұрын
Yeah and they made a bunch of mistakes along the way.. I doubt any of these people are mechanics.. 😂
@kingcatx2
Ай бұрын
@@kslandin Living in poverty makes you an expert in anything. no time for bs but just work.
@elwynjones-xf2zr
Ай бұрын
These boys are simply unbelievable, encyclopaedic knowledge of an engine, most mere mortals couldn’t remember where the first three bolts went back. I doff my cap to these boys, incredible.
@truckinfam2207
3 ай бұрын
Different world different culture but I will give them credit they do a hell of a job with what they have to work with. 👍
@Wadley225
3 ай бұрын
14:40 - I am amazed they are using something as high tech as a pressure washer for once!
@paulbellingham3948
3 ай бұрын
At least they waited till the engine was split, didn’t start on the outside
@kaosking420
3 ай бұрын
Did you see the Flywheel?
@jeremylewis5154
3 ай бұрын
Pretty incredible. I'm more impressed with everyone working together pretty much drama free in not the best environment.
@PatrickBaptist
23 күн бұрын
LOL, wow that flywheel is so cracked and trashed, it's ready to let loose and bust out the bell housing in a couple of miles..... I'm just shocked pretty much everyone has shoes or boots, bravo!
@jsilva7586
3 ай бұрын
the disassembly crew, builder guy who put the pistons in, the little kid charged with collecting all the bolts and parts I'm in total awe
@LichaelMewis
3 ай бұрын
I was running 100 psi of boost on 89 octane in 110 degree weather with A/F ratio of 15:1 and timing advanced 40 degrees. Needless to say I grenaded my engine. So it's now on the way to them to get properly repaired.
@marcomalo02
3 ай бұрын
First, find a dirt floor.
@docdetroit146
3 ай бұрын
Then hire child labor.
@bobgorman9481
3 ай бұрын
@@docdetroit146Don't forget the obligatory motor bike and old bloke sitting in chair in background!
@nasilemak868
3 ай бұрын
And Chipmunk voices!
@gregorizi
3 ай бұрын
and have 500 bucks, or in usa 50000k bucks for worse service. Some will always hate, since they dont know nothing and are following sheep without their own opinion, which is sometimes better because of their wrong opinions.
@docdetroit146
3 ай бұрын
@gregorizi Do you rebuild engines? Do you know having a piece of needed equipment being broken? If i needed an engine rebuilt and the crankshaft was stood up in the sand before it was installed i would bring my business elsewhere. The new bearings and crankshaft were expensive. Why start out with sand on them?
@RevelatingDemarchist4172
Ай бұрын
this was so cool to watch. No power tools. No manuals. Impressive.
@S1ckbg
3 ай бұрын
with the current emission frenzy going on around the world i give this guys an A+ for recycling.
@mikespain8655
3 ай бұрын
What would you give Pakistan and India for keeping the environment clean. How about an F.
@lifeguard92646
3 ай бұрын
Assembled according to German torque specs - gutentight. Great video.
@lauretiu
3 ай бұрын
man those torque specification cost money. about 6-10 grand more than the price of the whole rebuild in this video. and that doesn't even account for the snap-on or mac tools, tool carts/workbenches, we are talking just labor. this guys have something that 80% of us mechanics miss: Skill. you go here for a repair they don't even bother to see if something can be done by pure skill to fix it they go straight for cheap Chinese aftermarket parts that have 300% markup and they quote you by the book( that i think counts even the lunch brakes and bathroom brakes as work time) and not by how faster they can fix it because they are very skilled
@zfunk9
Ай бұрын
I didn’t see them torquing anything. You must have watched a different video than we did.
@brittoncorbin2858
2 ай бұрын
Would much rather have my son turning wrenches than playing on the phone
@Watts378
3 ай бұрын
3:30 - My man in the beige getup is rockin some clean Jimmy Conway shoes 👌
@d3athca3sar
3 ай бұрын
I guess he's the owner.
@eliterry3785
7 күн бұрын
The youngster was turning wrenches and anticipating what was needed to be done like a pro! I’d give a monetary thanks to the kid. Nice to see such skill. Ol’ boy in black knit cap is the brains I’d say.
@billtodd6509
3 ай бұрын
Bravo, you men are very, very inspiring. I wish Snap On or Matco would contribute a full set of tools to you to make life easier. We really enjoy watching you bring that equipment back from the brink. What kind of engine is it? Take care, Bill
@thesage4729
3 ай бұрын
clearly says Nissan Diesel on the top cover when he is filling it with oil ....weren't you watching : }
@billtodd6509
3 ай бұрын
Yes sir I was trying to watch, but Im legally blind. Hope you have a better day with someone else.@@thesage4729
@glennjones5349
3 ай бұрын
What ever you do .Don't lubricate anything during assy. Bearings are gonna love that.
@user-vj1es1ce4u
3 ай бұрын
They lubed the cam at least. Doesn't appear they torqued anything to specs however.
@marcripoche
3 ай бұрын
It's all lubed by the dust/ dirt particles in the air
@whogotfronto
3 ай бұрын
GET ER DONEEEEEEE
@tony359
3 ай бұрын
@@user-vj1es1ce4u it's torqued to their specs :)
@bulevartz
3 ай бұрын
The amount of talent in this Video is amazing.
@peterwaugh9416
3 ай бұрын
It would be really nice to see one of these guys sent to an engine-building factory in Japan to see an engine being built. I'm sure they would be surprised just by being indoors, on concrete, seeing power tools & PPE.
@itimebomb89
Ай бұрын
Imagine if these guys had a harbor freight around the corner. They would be unstoppable. My hats off to them. Makes me realize just how lucky I am.
@wmk1975
3 ай бұрын
Victory! Awesome job. Very impressive. In 1 day no less? Very nice!
@Personmolecule
3 күн бұрын
Не, ну что сказать, молодцы индусы! День и ночь работают да ещё в таких условиях! Завелась техника! Молодцы!
@garyclouse7234
2 ай бұрын
Looks to me like a master mechanic, and a dozen apprentices! Great job guys!!
@40vtr
3 ай бұрын
Literally built from the ground up 🎉🎉🎉🎉
@PSExcavationsLLC
2 ай бұрын
Well....what a great engine rebuild. Keeping the kids busy too. I have to be honest, i didnt think this engine would ever run again, great job! 👍
@winchells
3 ай бұрын
Much respect to these guys working on basic tools and outdoor garage!
@k9six185
3 ай бұрын
Funnier than hell listening to the minions in the background
@Highskill3r
3 ай бұрын
i thought it were the chipmunks
@viperboyjam1971
3 ай бұрын
Iv always said, torque specs are just suggestions.
@Will-ce7tv
3 ай бұрын
and 60kNm is always hand tight
@VincentFunk
Ай бұрын
😂@@Will-ce7tv
@user-tc2ch8bg2m
3 ай бұрын
гаражный ремонт на коленках - самый лучший и качественный! гарантия ? завелся, и считай что повезло
@grafluckner33
9 күн бұрын
Großen Respekt ,vor diesen SEHR Fleißigen Tollen Menschen ,FACHKRÄFTE !
@elgoog7830
8 күн бұрын
Been watching these types of videos(geographical area) for years now, and one thing I admire and love the most, is how you guys can work together so well.
@edwardlara1011
3 ай бұрын
WOW!!! I'm totally impressed, and blown away the team work, their passion and work ethic is amazing. They can actually rebuild a big block diesel engine with a couple of tire irons, a couple of screw drivers, and a hammer. No shop benches, no, respirator, no safety glasses, no gloves, no safety boots, no lifting belts, no nothing. These people actually do this work in sandles. They are amazing and incredible. OSHA what the fuck is OSHA? Never heard of it.
@Brainbaskit
Ай бұрын
Guess you've not travelled much
@xorek77
3 ай бұрын
Разобрал, помыл, собрал. Офигенный ремонт, а остальные пусть точат, шлифуют.
@user-eu1ss6by3f
3 ай бұрын
иногда и этого бывает достаточно
@MrRoman007
3 ай бұрын
Там коленвал был лопнувший 7:25
@znakrip
3 ай бұрын
Поменяли коленвал, поставили новые гильзы, чем ты не удовлетворен? p.s. Поршни -кстати тоже новые- не имеют потертостей и один, вроде, новый. Я примерно такой же ремонт делал при масложоре (honda f23A) - поменял только шатунные вкладыши и кольца поршневые. Мотор прошел уже 50 тыс. км, после такого _недоремонта_ - работает
@sergeyp9073
2 ай бұрын
Про песок забыл,щепотку туды-сюды
@garylee9738
2 ай бұрын
Soviet style!
@richardwarfield7386
3 ай бұрын
didn't see any lube or bearings go on the crank and only 2 of the cam bearings got any type of lube. Rod caps were not re-installed in order. Just creates more wear. Must be a tough diesel engine.
@Lonnie-Young
3 ай бұрын
It's fine the dirt from the floor is the lubrication for the main bearings.
@ftffighter
3 ай бұрын
They probably don't even know that there is even an order to the rod caps.
@lightshipchief
3 ай бұрын
The engine comes with a taillight warranty. Once they cannot see the taillights on the truck from the "repair" shop, the warranty has expired.
@cyclesaviorn2700
3 ай бұрын
If you look at their hands they are soaked in oil, just didnt make any effort to show the oiling in the video, i would suspect the cam bearings had some damage from the install though, ill give their job a 4 out of 10. It should function for a while
@MIKEx2112
Ай бұрын
Impressive to say the least... But we all know that thing exploded once you stepped on the gas
@gambrosi
3 ай бұрын
A mio avviso sono degli artisti della meccanica. Mi chiedo sempre, quanto possa durare una riparazione di questo tipo, dove quasi tutti i pezzi smontati sono stati solo smontati e lavati ed i pezzi sostituiti non sono stati rettificati. Anche il tipo di rottura mi fa pensare che il motore sia stato sfruttato in condizioni di elevato carico e sotto stress, quindi una valutazione per la rettifica dei cilindri, una valutazione se la testata sarebbe stato opportuno piallarla, se i supporti di banco che hanno sopportato la rottura dell’albero motore abbiano avuto qualche mini cricca o almeno tutti i bulloni cambiati. Comunque sono grandi meccanici
@user-zg1dq1hq3d
3 ай бұрын
While these guys don't have the best work shop,..they do have the best work ethic.Also have to appreciate how strong the oil pan is to bear the entire weight of the engine when it's on the ground.
@harshabiliangady3211
3 ай бұрын
Fantastic job gentlemen. Lots of respect for your good work from Bharat. God Bless You Guys for your work ethic. I want one confirmation the 'Crank Shaft' was broken how did you repair that? I hope there is another video showcasing how the repair was done.
@DewanaShah
Ай бұрын
Sometimes they weld and mill it on lathe machine, when no other option, however they prefer to replace such crucial part from scrapped dismantled engines as used parts.
@retorq
Ай бұрын
Some cool stuff going on in that engine, holes in the cam lobes for some sort of oiling assist, never seen anything like that. Oil squirters for the bottom of the piston/wrist pin, cross bolted mains, P-pump ...
@user-nt6cs4fx2v
3 ай бұрын
С песком с правильным моментом затяжки "на глаз" я уверен там масло тоже высочайшего качества))))
@rimasb7729
3 ай бұрын
А как иначе 😂
@N0Name03
3 ай бұрын
все как мы любим😁
@user-zv6yg4uw2b
3 ай бұрын
а отмытый тнвд с песочком и чистка форсунок наждачкой вообще бомба )))самое интересное у них это частая проблема поломанный коленвал , а ломается он из масляного голодания или за льющей форсунки , а это значит колено будет сломано в скором времени снова
@user-id3ft6fq7o
3 ай бұрын
В плане колена полностью согласен- сопромат не нае... шь😂😂😂. И ведь они повсеместно колено ещё и варят электродами🤦♂️...А если серьёзно- как можно отмыть отложения хаотично елозя тряпочкой по деталью? Сами-то в это верят)))?
@user-lw3dn9ob9y
3 ай бұрын
ну Вы придирчивый )))
@Arthur-hg7ny
3 ай бұрын
8:50 and I’m afraid to get gasoline on my hands at the gas station 😂
@mauricebarbot6268
14 күн бұрын
Incroyable ! Tout à la main, avec un outillage rudimentaire ! Très beau travail, même les enfants participent ! Bravo !
@danc7561
2 ай бұрын
Amazing work guys!! Much love from Texas!
@luishetzler9429
3 ай бұрын
Ive seen mens in other countries poor countries do some amazing work with limited tools its really cool
@MrMan5014
3 ай бұрын
Never knew Nissan made large displacement V8 diesels…that’s impressive!!
@nicolassiagian2536
3 ай бұрын
For their heavy duty truck,ud trucks
@ewohl0895
2 ай бұрын
You just knew it'd run perfectly. Nothing fancy, just getting the job done!
@Mechanical-Hands
Ай бұрын
Absolutely! 🌟 Sometimes simplicity is the key to success! 🔧👍 Thanks for recognizing their reliability and determination! 💪🛠️
@richardmori1389
Ай бұрын
Wow, those British mechanics sure are creative- gotta hand it to them.
@BuilditUK
3 ай бұрын
I wonder if that was the crankshaft that I watched someone weld back together in another one of these grease n grit videos. Here's your new engine sir, just don't rev it too hard
@kurtschultz4025
3 ай бұрын
I love how they get it running on the blocks of wood.
@colinevans7134
Ай бұрын
Great video,don't need expensive tools, got all the time in the world and why not .loved it and can't wait to see more
@colintx800
2 ай бұрын
Boy in the background smiling when the engine started, Loved that 😁😁
@ibgeorgeb
3 ай бұрын
Your hard work paid off gentlemen. It started and kept running. Excellent work! 👌🏾
@hollywoodjoe3259
3 ай бұрын
Some of the best performance engines are built in the dirt using old 7up bottles .way to go punjab👍
@inamamin6803
3 ай бұрын
They are Pathan not Punjabi:)
@mtacoustic1
2 ай бұрын
Nice ISO clean room conditions! What's a little sand in the works? Wonder how many minutes of warranty it has?
@ArtCarb
Ай бұрын
"Torque wrench, that's a myth my boy" ... seriously, really skilled hard workers, respect.
@jimmysucipto1251
3 ай бұрын
the way they cleaning the equipment with petrol was so satisfying
@dcdanger6151
3 ай бұрын
I am envious they can use gasoline, we have to use water based citrus sh*t here in California
@chunhaylee
3 ай бұрын
I hope that's either diesel or mineral spirits. Gasoline is a disaster waiting to happen.
@nasun4659
3 ай бұрын
Habib and co, we get it right every time, 10 percent of the time
@DosDonts101
3 ай бұрын
Should we build a table first so that we can put everything on it? No, plenty of dirt floor around.
@juancervantes313
Ай бұрын
These dudes would be rich anywhere else in the world. They could literally teach the actual mechanics class 🔥
@gordonfrigaard6521
3 ай бұрын
They need to visit the local Harbor Freight and get some rackets for $29.99
@billtodd6509
3 ай бұрын
while they are there, maybe they can find some ratchets, too.
@beachthor1
3 ай бұрын
Don’t forget the 20% off coupon!
@user-vj1es1ce4u
3 ай бұрын
Oh you mean like tennis "rackets"?
@sanakubi466
3 ай бұрын
NISSAN UD RF8 V8 Engine?
@csfabricationllc2252
Ай бұрын
Hard working fellas foung what they can , with what they got. God's blessings be upon them and their craft. May go bless them with tools and prosperity for the food on the table.
@2426eltejano
Ай бұрын
I always enjoy watching this videos , is like watching when I was growing up in Mexico doing the same thing in the shop , just like that
@janchristensen7993
3 ай бұрын
Amazing. What is the cubic inch of that engine?
@hamid1k
3 ай бұрын
Alot
@bestopinion9257
3 ай бұрын
All of them.
@pierregoldstein
3 ай бұрын
16.0L V8, 12 HP, killed it!
@noahg.6149
3 күн бұрын
I respect the amount of work done here with their limited resources. I can only imagine how much better they’d be if they had power tools, engine stands, shop tables, proper parts cleaning station, etc. But one thing I noticed, after doing all that work… why did they not replace the clutch and flywheel?
@wheeliezaksza2431
3 ай бұрын
Najlepsi mechanicy świata warunki polowe 👏👏👏
@user-iy9tt7lj7e
3 ай бұрын
Java from starwars in real life
@1unsung971
3 ай бұрын
Wonderful skills fellas. Bravo. Terrific work.
@mt23289
2 ай бұрын
Top job lads👍greetings from Scotland 🏴
@doubleaking
3 ай бұрын
Awesome video! Loved the knowledge and work ethic of these fine mechanics!
@doodskie999
Ай бұрын
Their secret technique? Find dirt, lots and lots of dirt
@user-fw6xr3ue2q
3 ай бұрын
Did they really just slap that together dry?
@humboldtharry1289
3 ай бұрын
I know next to nothing about engines but wow it defies common sense
@mzerv00
Ай бұрын
Look at the conditions they are in. Those guys are incredible. Respect from USA
@chuckeberth4370
Ай бұрын
Doing the rebuild in those conditions and it starts. They know their jobs which were OJT training. I'm impressed.
@DeineMa1312
3 ай бұрын
How did the white dude end up in a place like that 😅 awesome video, really enjoyed watching it!
@kaboomer4297
3 ай бұрын
I wondered the same thing...
@xX_Gravity_Xx
3 ай бұрын
Y'all serious right now?
@michaelsalomon78
3 ай бұрын
Nice work but it's just too bad you put back the old clutch which is almost dead...
@jakedel1711
Ай бұрын
when the head just fell off on the ground, i audibly gasped 😂
@internationalimmigrant2100
3 ай бұрын
The young lad is going to be a master mechanic by the time he’s 15
@MC-nb6jx
3 ай бұрын
No he’s not 🙄🤣
@tomrogers9467
2 ай бұрын
He’ll get his 10 lb. Sledge Hammer license.
@jonsona9353
2 ай бұрын
Great video. Children receive practical knowledge from childhood, do not wander around the streets doing nothing, and do not smoke crack. Excellent, well, maybe they will throw some acid on the woman, but these are minor things.
Пікірлер: 1,2 М.