Brilliant! Major problem in my shop solved. I'm on my way to take apart my toilet! Thanks for the tip, Charlie......
@JackbenchWoodworking
6 жыл бұрын
Glad you liked it, Mark. With all the woods around your house a toilet is just redundant anyway.
@erickdanielsson6710
Жыл бұрын
Great Idea, Thanks. I sat at your Friday GA veneer lecture, GREAT INFO. Very sorry I missed your Finishing lecture :-( Doug
@JackbenchWoodworking
Жыл бұрын
Thanks! I'm glad that you were able to attend the seminar. I plan to be back at The Woodworking Show again next year.
@jvmiller1995
Жыл бұрын
Wow this is awesome. I am a woodworker welder fabricator knife maker jack of all trades. But I was searching to see if anyone had made a DIY vacuum jig for drilling bowling balls. I am wanting to drill my own balls and I seen a very expensive one you can buy. But this I think would work fine. I think I would cut a wood ring to go around it with the gasket only 1/2 to 1/4 inch proud just to see if it would make it more ridged. But wow What a Idea I could see lots of uses for this. I think I will order me a seal today.
@brianrowland9993
2 жыл бұрын
So you don’t need to spend big dollars on a Festool vac clamping system! Great practical use of available bits to get a a very satisfactory vac clamping result! that is custom built. Thanks fir sharing - subscribed!
@JackbenchWoodworking
2 жыл бұрын
I still use this vacuum jig and it works great, glad you like the video!
@KSFWG
6 жыл бұрын
A great example of American Ingenuity !!
@JackbenchWoodworking
6 жыл бұрын
Thanks Dave!
@jimkodysz5404
6 жыл бұрын
That's really thinking outside the bowl, Charley! (Sorry, I couldn't help it)
@JackbenchWoodworking
6 жыл бұрын
Thanks Jim! :)
@AutotechWoodworking
6 жыл бұрын
Maybe he was thinking while on the bowl!
@wb_finewoodworking
6 жыл бұрын
Super idea. That’s something I’m going to have to make when I have a need for one. Thanks for sharing.
@JackbenchWoodworking
6 жыл бұрын
Thanks! I'm glad you liked it.
@kevinhuber3651
Жыл бұрын
Great idea, I think maybe o ring material might also work well for this I will have to give it a try thanks for the inspiration.
@JackbenchWoodworking
Жыл бұрын
Absolutely, an O-ring would work, especially on a flat surface
@DIYMinded
4 жыл бұрын
Great project! Thanks for taking the time to make and film it. Subscribed!
@JackbenchWoodworking
4 жыл бұрын
Awesome, thank you!
@TheMessyStudio
6 жыл бұрын
Great idea, Charlie! Billy
@JackbenchWoodworking
6 жыл бұрын
Thanks Billy!
@mlrable
23 күн бұрын
Excellent thank you
@ellsworth5841
4 жыл бұрын
Beastly clever.
@JackbenchWoodworking
4 жыл бұрын
Thank You! I'm glad you liked it.
@andyandnancy
6 жыл бұрын
Brilliant idea!
@JackbenchWoodworking
6 жыл бұрын
Thanks Andy!
@flochartingham2333
6 жыл бұрын
Awesome idea! When I saw this video linked in my email I thought it would be for a project using a vacuum pump to actuate regular clamps. Any idea about how well a vacuum check valve would do to maintain the necessary suction if you were to use a hand pump set up? (hint hint) I imagine multiples of this device could be used in a jig made for an engine stand for holding vehicle body parts.
@JackbenchWoodworking
6 жыл бұрын
Hi Flo, I was thinking the same thing. I tried installing a ball valve in the hose between the clamp and the pump, but it didn't work. I suspect that the vacuum leaks right through the wood. Regardless of a hand pump or motorized, it would hold longer if I had some kind of tank between the valve and the clamp. Here is an example of what I mean. They are using some PVC pipe as vacuum tanks: www.joewoodworker.com/docs/ProjectEVS.pdf
@trainwon5699
5 жыл бұрын
Good idea! Thanks
@JackbenchWoodworking
5 жыл бұрын
I'm glad you liked it, Don!
@acerjuglans383
4 ай бұрын
I would suggest getting an oilless vacuum pump. Yours shoots a mist of oil into the air, as you've probably already noticed.
@JackbenchWoodworking
4 ай бұрын
Yes. I've actually upgraded my vacuum pump since I released this video.
@mikeygee4564
3 жыл бұрын
Eeeeeepoxy. Just teasing, i find it interesting some people say it that way. Thanks for showing that this is pretty easily feasible. I'm going to do it but I think I may try silicone instead of epoxy to adhere and seal the gasket to the wood. I would think the flexibility may just help ensure it doesn't come loose or leak down there as I'm moving things around.
@JackbenchWoodworking
3 жыл бұрын
Thanks, If the silicone will stick then yes!
@edwardkamel3397
5 жыл бұрын
You can eliminate movement by using a dowel vertically inserted in the wooden base and wedge between the part and dowel.
Пікірлер: 34