Awesome I bought one came the next day, fits nice in a rock island armory 1911!!!!!!
@gutadin5
3 жыл бұрын
is it effective in reducing recoil and muzzle rise? how many percent?
@HollywoodNappa
3 жыл бұрын
After purchasing mine i had a bear of a time installing it on my ATI thunderbolt with the stock spring cap, and it was impossible. I was confused at first when they said one was included with the compensator. I guess along the way they stopped doing it. After I purchased the 1inch spring cap it fit perfectly.
@robin123gh
3 жыл бұрын
Yep. They want that extra money 😅
@iswearnotme
3 жыл бұрын
20 minutes of fudging around trying to install this on my ATI and read your comment and looked down to see my hands sliced to shreds. This thing is sharp. Careful.
@avencannon9719
Жыл бұрын
Do you need a full length guide rod as well?
@samuelleahy4780
5 жыл бұрын
How come you didn't make to fit the standard size spring cap.
@rylanmartin9040
3 жыл бұрын
It does fit a normal cap he just used the valkryie dynamics one
@yaelavila4167
4 жыл бұрын
Does the compensator work on all 1911 weapons regardless of factory like kimber, colt, sig sauer? or is it specific to a single factory.
@USA2283
2 жыл бұрын
1911 are nuilt to mil spec. should work with all stardard size 1911s
@fouryearproductions
4 жыл бұрын
Correction: it doesnt come with the plug
@1911geek
3 жыл бұрын
I notice its $5.00 if purchase in combo with comp
@Jrsydevil7
Ай бұрын
I love how they say that the spring cap is included, which is why I didn't order one. So then when it came in I was super excited to throw it on my one Springfield 1911 Garrison that I've done some work on already. Well long story short, I couldn't put mine on my gun, let's just say that I'm not happy because this is false advertisement that and I just ordered the recoil plug. Super annoying
@Suckmytoes11
2 жыл бұрын
Sad they stopped providing the spring cap. Kinda lame you gotta buy it extra now
@andyq4518
5 жыл бұрын
Do you need a full length guide rod to use the brake?
@douglinwatson1345
3 ай бұрын
Received mine about a week ago. Love it. Fits well and went on easy. Only issue is it won't lock into place. I can spin it either way. Without having to push down on the spring cap. If that makes sense? I dropped it off to my gun guy and am hoping it's an easy fix. Any thoughts would be great.
@fishman80
5 ай бұрын
They must’ve stopped including the spring cap. I didn’t receive one with my comp.
@irvingacosta7853
Ай бұрын
If I add this comp do I need to swap the factory recoil spring and if I do what weight should I use
@violator-_-3
4 жыл бұрын
Just got my cobra skeleton grips today along with my muzzle...always love valkyrie dynamics...wasnt my first purchase but i always buy from them for my 1911's...by the way i own that EXACT rock island
@slik-1176
Ай бұрын
I followed your steps piece by piece but mine refuses to come off of my kimber 1911
@commonsense8800
2 жыл бұрын
I picked up my first 1911 today and I f****** hate itCan't stand dealing with that piece of s*** f****** spring putting /e slide back on
@colmos88
4 жыл бұрын
So, at 1:22-1:30 he clearly says that the spring cap is provided with the Predator and Punisher muzzle break. So I ordered the Punisher muzzle break and it didnt come with it. So today I looked at the video again and it says Video update......
@jayscorner5387
6 жыл бұрын
The muzzle is not fitted to the barrel, which makes the gun less accurate. Are all one size fits all? Or do some need fitting for the tighter barrel to bushing lock-up. Thank you for your time.
@Carnerd101
Жыл бұрын
I like how you make a statement like you're an expert and then proceed to ask questions how it works.
@xxklokxxcolt
6 жыл бұрын
I just received the CASTLE style muzzle break from you guys and it is top notch best one I've seen
@sgtwilderness2821
6 жыл бұрын
Negative Alien Do you feel a difference with the castle style. I ordered one. Also ordered the other style to compare.
@dohnerjoinsllc9154
2 жыл бұрын
I can't get the muzzle brake to go on my Smith&Wesson SW1911 E Series. It wont go back far enough to turn and lock in. How do I return it?
@jodybruce5097
7 ай бұрын
great video will this reduce muzzle flip better than a ported barrel?
@luckylouch86
Жыл бұрын
It's not included with it i just paid 10 bucks extra for it when i ordered min
@EZedp
Ай бұрын
Will this install on my Colt Delta Elite 10MM Pistol?
@markgray9670
Жыл бұрын
Wrong end of spring during install - flat end of spring into gun is correct...
@tjguerin6683
2 жыл бұрын
Of course mine didn’t come with a spring cap like the video says
@thiernobarry2675
4 ай бұрын
Does it matter if i have a threaded barrel, wil it install just the same
@clarkkent3809
Жыл бұрын
Do you have to replace the spring cap to install the compensator??
@jiankandt1645
2 жыл бұрын
Do I need to get a different spring cap for the 1911 to fit the compensator?
@LuisGonzalez-tg7nv
6 ай бұрын
I have a tisas 1911 night stalker will it work for it as well
@JamesJames-ji2dr
3 жыл бұрын
I was told my Gunsmith I needed an extended and threaded barrel in order to add a muzzle break. Is that not the case?
@franciscoortiz9730
2 жыл бұрын
No matter what I can't mine off, any suggestions?
@cameronanaya2489
4 жыл бұрын
I did not get a spring cap
@orangecrush5512
3 жыл бұрын
Just bought one for my Citadel .45. I'm sure it's gonna look awesome, and I hope it helps my wife be able to handle the recoil a little better.
@donaldmyck4296
3 жыл бұрын
Doesn't even match the blued gun. Who needs it.
@big_red_606
2 жыл бұрын
Hey, so mine goes to 4 o'clock but won't come out???
@iswearnotme
3 жыл бұрын
Be careful forcing this thing too hard. The grooves are very sharp.
@00-Dima
Жыл бұрын
Wtf never got a spring cap with mine
@klaypalomo8869
4 жыл бұрын
Just bought two and two spring caps. Looking forward to the look of them.
@thenaturalswimmingpondco.1883
3 жыл бұрын
Lol spring on backwards
@YISP7
3 жыл бұрын
A .223 cartridge fits perfect to take off the compensator :)
@leohthelion8485
4 жыл бұрын
Just installed one on my ria 1911 was wondering if with time does it damage the lock on groove on the slide as I've seen people reporting damage?
@gutadin5
3 жыл бұрын
is it effective in reducing recoil and muzzle rise?
@Haseoscott1
6 жыл бұрын
Installed one of these on my Taurus PT1911. Now I cannot remove it.
@valkyriedynamics9151
6 жыл бұрын
Hi, please reach out to our customer service department by emailing askteamvalkyrie@gmail.com we would like to get in touch with you to help solve this issue.
@jamespierce5883
4 жыл бұрын
SiniStache i cannot either
@ajaxashford4815
4 жыл бұрын
Once you turn the comp counter clock wise use the weight of the barrel to push it out by shaking the gun. That should work. Did for me.
@darkflowgaming2443
4 жыл бұрын
Valkyrie Dynamics sane thing happened to me I cannot get mine off I know how but when I depress the spring with your tool no matter what I do the break won’t budge please help!
@skylinez4793
4 жыл бұрын
SiniStache thanks Im glad I saw your post!
@ricardovillage2761
2 жыл бұрын
I order mine today
@garynoyb4318
5 жыл бұрын
Does this work on a Springfield operator full rail trp?
@ajaxashford4815
4 жыл бұрын
Yes
@siorgarcia
6 жыл бұрын
Does it work with a 1911 38 super?
@valkyriedynamics9151
6 жыл бұрын
Hi, thank you for contacting us! Our comps can fit .38 super as long as your barrel dimensions are within our specs. We have full size compensators for 5 inch Government barrels and Commander size for 4.25 inch Commander barrels. For full size: Fits 5” Government length 1911 Autos with a barrel OD between .577"-581". The bushing ID. Is .583" +-.0005"
@j.s.8834
6 жыл бұрын
Was worried it wouldn't fit my Springfield armory 1911 loaded with the 2 piece full guide rod but it does. 😎
@valkyriedynamics9151
6 жыл бұрын
Great!! We're happy to hear that it ended up fitting nicely!
@christianmercado7467
4 жыл бұрын
Valkyrie Dynamics can this fit on my Springfield 1919 9mm?
@j.p.4541
11 ай бұрын
Hi Dustin, I just purchased the predator comp for my Tisas Night Stalker 1911 10mm. I was able to install it with no issues. The only issue I found was the slide will not go all the way rearward, allowing me to lock the slide open. The included spring cap is about an inch long and the manufacturers is about 1 and half inches long. Can you give me some suggestions on what to do so the gun will function correctly? Thanks!
@Gargulmon
2 жыл бұрын
E
@Trumplican
2 жыл бұрын
for removal why not just hold the slide part ways back pop the pin out and it will slide right off
@saltkettledesignsbyr.ebarn8748
2 жыл бұрын
Major flaw with your spring cap is that it's Hollow miles for anything to get in there and also it's a terrible design when removing the muzzle brake it should be solid
@mutanturFolia
3 жыл бұрын
Why does everyone that makes videos always blocks the camera with their hands so you can’t see what is happening?
@t3xenfury
Жыл бұрын
will this fit a girsan mc1911 without a threaded barrel?
@gabenix7124
Жыл бұрын
You don't need their spring cap you can simply file the open end of your current one. If you are running rock island you will have to file almost 1/16" off of it
@herrotto7787
3 жыл бұрын
You put the recoil spring in wrong... The coiled end goes in FIRST. What I use to remove the comp is a 3/8 dowel sanded down to fit a 9 mm brass. Drive the brass on the dowel and your good to go.. The dowel needs to be about 3 to 4 inches long....
@squidishtendencies1523
3 жыл бұрын
Why wouldn't you make a tool for removal instead of having to find something laying around the house that will fit? I'd pay the extra dollar for it!
@matttorbush2662
4 жыл бұрын
Anyone having an issue where the spring cap does not fully seat and lock in? When I put the brake on under some pressure I can twist the brake off without pressing down on the spring cap.
@GEHatred
3 жыл бұрын
I really liked it at first. But then realized it was the cause of my fiber optic blowing off. So, I tried taking it off. I used a could different methods and even bought my self one of those drill bits. Nothing would get it off. It would not move in to the 4 o clock position. Got it close to 5 o clock but not any further. Then it got stuck. Finally, I had to beat my recoil spring a bit to get it down and away from the really low piece on the compensator. Now I need to a new spring cap, no big deal but I don't think I'll be putting the compensator back on
@TattooBlue602
2 жыл бұрын
Thank you so much I was getting so frustrated cause I couldn’t get this this off to clean it😂 simple last step I just couldn’t figure out. Love how it looks on my 1911
@xcptcronchx
3 жыл бұрын
Fit my 1911 A1 loaded. Was a little tight but it did work. Have function checked everything no issues.
@killtryray6643
2 жыл бұрын
i used this tutorial to verify the realism in my wip game
@50shadesofkarlcampinkarl96
3 жыл бұрын
That’s a lie I bought one and didn’t get a spring cap with the muzzle break
@Jmpmaster83
3 жыл бұрын
Looks great but if it makes it so you have to use tools for removal it should include a tool for that purpose so the customers don’t have to go buy things they might not already have.
@spencernajera512
3 жыл бұрын
anyone know if this will work with a springfield m1911 custom?
@gillmccuddy
4 жыл бұрын
I just got my vd break in today. I need help its too tight over the barrel. Ruger 1911 gov size. How should i go about the minor fitting that seems to be needed?
@ProfessionalByNoMeans
2 жыл бұрын
I'd like to see a slow motion video of this in action since the comp is on the slide and not the barrel. I think I'm getting ready to order one either way.
@j.p.4541
11 ай бұрын
The spring caps are now included? Sweet!
@pennfishing9246
3 жыл бұрын
All the parts are scratched using the file.
@billdubois5223
3 жыл бұрын
Do you make these for a 1911A1 chambered in 9mm ??
@BruteForceGarage
2 жыл бұрын
So will this fit on a factory new SDS Tisas 1911 ?
@rylanmartin9040
3 жыл бұрын
Does the punisher or predator reduce the most muzzle flip?
@P00RKN00W
2 жыл бұрын
Does it fit on the full size 5” 9mm 1911?
@technologyjunto
5 жыл бұрын
You put the spring in backwards
@thefuhrer5873
5 жыл бұрын
will it fit a 9mm full size rock island armory 1911?
@kzyt87
4 жыл бұрын
what about the 9mm 1911 full size
@duallydontcare1869
4 жыл бұрын
Will it work with a threaded barrel already installed?
@treeman2146
4 жыл бұрын
Fits in my commander sr1911
@andrebryant4775
3 жыл бұрын
Does this fit on a remington 1911 r1?
@jamesthreats5800
4 жыл бұрын
Please one for Star model BM
@melaniesalazar3482
3 жыл бұрын
Can u use normal spring plug ?
@ScottAT
6 жыл бұрын
Just use a 2 piece guide rod, jeez.
@juansanchez3343
4 жыл бұрын
Great product and video!
@gutadin5
3 жыл бұрын
is that compensator effective in reducing recoil and muzzle rise? how many percent?
@brandonrayner5253
3 жыл бұрын
Reducing recoil, that depends on your caliber. With a 45 it won’t really reduce recoil because your shooting a heavy bullet. As for muzzle rise or flip it reduces it about 10-15%, it might not seem like a lot but it does help manage the muzzle rise some because your adding weight to the end of the barrel.
@recklessclan4078
2 жыл бұрын
Bought one and didn’t come with the spring cap, was so mad when I couldn’t get the groove past that long cap 😂
@johnhagerty6400
2 жыл бұрын
Had the same problem, so I sanded the cap down about 3/16 then It fit
@vardansarkisyan3027
2 жыл бұрын
Thank you!!
@joshballesteros22
4 жыл бұрын
Outstanding!
@jeremyhunter1459
2 жыл бұрын
Gorgeous
@ajaxashford4815
4 жыл бұрын
I got to admit I was thinking I'd have to send this comp back until I saw this video. Then it just snapped in. Love these comps for looks and effect.
@jodybruce5097
7 ай бұрын
did it make a big different in stopping muzzle flip? does it work as well as a ported barrel?
@RyanRinauroTV
4 жыл бұрын
What size guide rod is yours??
@brandonrayner5253
3 жыл бұрын
It was a full length guide rod
@xygiqfon2477
3 жыл бұрын
Do u have this in 9mm 1911?
@rylanmartin9040
3 жыл бұрын
The .45 comp works on the 9mm
@Hatchet69th
6 жыл бұрын
can you ship to Canada??
@valkyriedynamics9151
6 жыл бұрын
As of right now we do not ship out of the US. Hopefully we will be shipping internationally soon. Check out Aztec Armory though, they do ship to Canadian customers. www.aztecharmory.com/
@Kurogane_666
6 жыл бұрын
I was looking to see if I could find a compensator that stays put, not move with the slide, does your company make them? It attaches to the frame
@valkyriedynamics9151
6 жыл бұрын
No. We currently do not make any compensators like that.
@ajaxashford4815
4 жыл бұрын
You need a threaded barrel and a comp that threads on.
@brianhoward4033
4 жыл бұрын
will be stuck on the gun and will have to machine it off damaging the slide. Horrible company and they offer no help DO NOT BUY!!!
@bwilson0213
6 жыл бұрын
Im having trouble getting the guide cap back on, it seems like my guide rod is a bit longer than the one demonstrated in the video. Ive got a springfield government model range officer with the two piece allen head guide rod. Woukd my best bet be to just buy a new guiderod? If so, are there any specific ones you would reccomend?
@valkyriedynamics9151
6 жыл бұрын
H, yes buying a shorter guide rod should help. You can find them for around 5-10 bucks online. Try Wilson combat and Brownells' to start.
@bwilson0213
6 жыл бұрын
Valkyrie Dynamics awesome thanks, I also reached out on Instagram and got a quick reply there as well. I really appreciate your companies awesome customer service
@dwaynethibodeaux
6 жыл бұрын
Brandon Wilson can u tell me where and what u needed to make ur muzzle break work on ur range officer?
@bwilson0213
6 жыл бұрын
dwaynethibodeaux I haven't actually went out to get it yet cause I ended up doing a bunch of military move stuff but I'm gong to take my guiderod into local gun stores and find a one piece that's hopefully jut the couple hairs shorter that I need to get the brake on. There's also the option of the shorter style guide rod
@veronicaeufracio4809
7 жыл бұрын
I have a Remington 1911 Enhanced model with a 5" barrel will the predator version fit automatically? Or will have to do adjustments
@valkyriedynamics9151
6 жыл бұрын
As long as you ave a standard full size barrel busing our full size Predator comp should fit. What are the most common fitment issues I may encounter when installing an after market compensator? Some buyers may find that they need to modify the locking lug on the compensator if the fit is too tight. If you are comfortable making modifications yourself you can usually do so with either a dremel or fine grit sandpaper. If not we recommend consulting a gunsmith. If your stock spring plug is longer than 1.2" it will most likely not depress down far enough to install the compensator. In that case we recommend that you use a Valkyrie Dynamics spring plug, Commander spring plug, or shorten your stock spring plug.
@gitgeezer
6 жыл бұрын
Yes, you will have to modify the locking lug to match the dimensions of your current Remington lug. Don't try to use your original spring cap unless you shorten it by .050"
@guitarpro594
6 жыл бұрын
Veronica Eufracio you'll need a shorter cap for the spring or to file down yours. I had the same issue.
@rexwatson7070
6 жыл бұрын
guitarpro594 did you have to do anything to the compensator itself or just get a smaller spring plug
@2APOV
6 жыл бұрын
Will It fit on full size 1911 9mm?.
@valkyriedynamics9151
6 жыл бұрын
Yes it will.
@gillmccuddy
4 жыл бұрын
Is the spring plug still included with the comp? It seems its now an add on?
Пікірлер: 134