💥 Buy now 💰 amzn.to/3VCKk8S 💥www.tftmax.com 💥 TECH MAX TRADE SHOW! 💥
@yi-vn4fz
6 ай бұрын
the 4 pin fan connector can be easy unplug and plug back to make it fit very good and straight, u should try before complaining. u see the zigzag condition due to the shipping
@Nintenboy01
5 ай бұрын
I believe Antec uses this same case as well for the NX200M, just a different front
@adriansalter509
Жыл бұрын
Great case, I love it... But I went for a micro build for a reason. Cabling is tight but spend the time and get it tidy and it will look good. PSU must be modular as there is little space, even when the HDD bay is removed. The bundled fans should be replaced if you care about quiet.
@evoemperor3776
Ай бұрын
Is it possible to fit 3 120mm upfront?
@itsmehazster
Жыл бұрын
I used this case for around a year now, and recently I bought the ID Cooling FrostFlow x240 and it doesn't fit on this case. The cable management kinda tight too, and the hdd bay is compact and hard to adjust.
@venus1x799
Жыл бұрын
Excuse me could you do a video on how to plug in the molex cable please
@owenabot9876
Жыл бұрын
To your psu molex connector
@Grenadeo617
Жыл бұрын
I absolutely love tecware cases but also have absolutely no clue where the heck to buy them. can anyone tell me where i can purchase one of these awesome enclosures?
@Fecdous
3 ай бұрын
Can it put radiator on top?
@yayawo2008
Жыл бұрын
as ask by Mr. K below, Can the fans (2 Front + 1 Rear) be connected to the motherboard instead. My MOBO is ASUS PRIME H610M-E D4 H610 and PSU is Antec NeoECO Modular 550 V2 550W 80Plus Bronze?
@aspieantics9817
2 жыл бұрын
how does the case feel compared to the nexus m if you tried it? tryna move from that case to the air m2 and wanna get my money's worth LOL
@michaelntjy
Жыл бұрын
Nexus Air M2 is a smaller version of Nexus Air M. Aside from being a little bit smaller, it's also non-RGB.
@MikeDaveYapOfficial
Жыл бұрын
can this fit a 160mm psu with the storage bay?
@NJaaayeeee
Жыл бұрын
Is ID-COOLING SE-226-XT ARGB CPU COOLER - SNOW EDITION | 6 HEATPIPE | ARGB LIGHTING okay for this case?
@chihirohiro46
7 ай бұрын
What GPU was in the build?
@ianc3092
Жыл бұрын
hello, is the tempered glass tinted?
@nictech4253
Жыл бұрын
no, its clear with a black edge all around
@qwaken4145
Жыл бұрын
Can this fit a water cooler
@waxenvittharr6415
2 жыл бұрын
How much space for the psu
@ecabmad
2 жыл бұрын
Hoy much space there's for the PSU with the HDD cage in place?
@nictech4253
2 жыл бұрын
Not much, I have build one with the White version of it (the same as shown here, but White, REALLY nice looking I have to say, every one who see it falls in love with the look and aesthetics), and I had to take the caddy out(did not mind anyway, the MB has 2 m.2 drives), so the cables could fit with ease in that space, however, if you do have a fully modular PSU, that would be a lot less "troubles". the other issue I have found is the back fan If you have a MB with bulky, full VRM heatsink(As I do), the fitting is REALLY snug(likely it would scratch the heatsink if you are not careful)
@arigalarssen698
2 жыл бұрын
@@nictech4253 what GPU are you using bro? I have a plan to upgrade from GTX 1650 Super which is dual fan to Radeon Rx 6700 xt Red Devil with Triple fan,do you think will it fit?
@nictech4253
2 жыл бұрын
@@arigalarssen698 that GPU is a little too large for this case, I have a RTX 3060(Triple fan) AND fits... With the help of the Gods(case "max" length is 300mm, and the 3060 is near 290mm
@arigalarssen698
2 жыл бұрын
Well,that's what i hate about small casing. I didn't want to change the casing because i really like the model and the airflow tbh. Thanks for the quick response btw,really appreciate it !
@nictech4253
2 жыл бұрын
@@arigalarssen698 Yeah, for this form factor, that's a common issue, Even though, it does look really good(I do love mine), you have to accept its limitations(or have a measuring tape around your desk when looking for components upgrade)😄
@adhiprasetyo4871
2 жыл бұрын
can we use (front fan) in behind frame
@jeji5860
Жыл бұрын
actually yes but your pc gonna look weird, i tried it, best optimal solution is two 140mm fans in front
@adhiprasetyo4871
Жыл бұрын
@@jeji5860 So, its will be optimal with 2 fan 14 inch (front), 12 inch in rear ? and how about airflow fan obtained from the casing, its good ?
@TechforTechs
2 жыл бұрын
UK 💥 Buy now 💰 amzn.to/3PvRIwv International 💥 Buy now 💰 amzn.to/3waA9LU
Пікірлер: 38