Today We Change the Valve Cover Gasket on a Mazda MZR 2.3 L Engine! Join our Community of DIY'ers: kzitem.info... Follow us on Facebook for More DIY Goodness: / e.doityourself
Follow us on Twitter! / everything_diy
Check out our Pictures on Instagram! / e_diy
This process will also work for the 2.5L and 2.0 L engine as the valve cover design is the same. If you’re seeing a bit of oil seeping from around your valve cover or you’re finding oil around your spark plug threads it's likely you have a worn out gasket. Luckily a new gasket should only cost $20 and requires no special tools to replace.
*This may also work on some Ford Ecoboost and Duratec motors as they're based off the Mazda MZR motor*
Parts:
- Felpro VS50639R1 Valve Cover Gasket Set
- Permatex Ultra Black Silicone Gasket
Tools Used:
- 3/8 Ratchet
- 8mm deep socket
- 14mm socket
- 3/8 Torque Wrench
- Hook and Pick Tool
- Flat Head Screw Driver
- Needle Nose Pliers
- Adjustable Wrench
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence - please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
**SAFETY FIRST EVERY TIME**
Негізгі бет Автокөліктер мен көлік құралдары VALVE COVER GASKET REPLACEMENT!
Пікірлер: 234