this takes me back to the mid seventies when I was first learning to be an Automotive diesel mechanic...... many an hour spent at the wire wheel cleaning every nut and bolt and part. then cutting the valves and seats. yes cleaning every part by hand was a better idea..... I always knew if a part was worn past its repair tolerances early on in the cleanup!
@nickbullard42
3 жыл бұрын
You always want to move all the way across the stone with the valve. It will help keep the stone true so you won't have to dress it near as much.
@olhemi1
2 жыл бұрын
🙂👍☕ Nice job on your video
@bobg3034
2 жыл бұрын
I have the same valve grinding machine!
@JamDrew08
4 жыл бұрын
You need a Dial Test Indictor D.T.I.
@kevykev38
4 жыл бұрын
Use glass bead blasting cabinet to clean valves
@randy1ization
2 жыл бұрын
or ez off oven cleaner and a red scotch brite.. put the valve in a drill, and hold the pad against it.
@Nords1982
3 жыл бұрын
I got 2 for $100, first one is B&D vintage model, second one is a newer B&D. had no clue the stone dresser tool was needed. Need to find one.
@jameslatanejr5778
23 күн бұрын
Can you put a 30° cut ,a 45°and a 60° on the same margin
@55chevytruck
5 жыл бұрын
I have a B&D 6305. What are the holes in the right side tip holder for?
@jamesbowenjr.3022
Жыл бұрын
rubber gloves scary dangerous, didn't chamfer the valve stem end , didn't have much oil on when cutting, just my thoughts
@LewisHollis
7 ай бұрын
You show valve against the stone , what were your hand doing ,u didn't show how to do it
@SotoAdvert
4 ай бұрын
One hand hold the camera, and the other hand, he wanking off.
Пікірлер: 14