Great video. I like the way you call your model of car.
@jonyr1TT
Жыл бұрын
Thanks! 👍
@Toolsandtech868
2 жыл бұрын
Great video I've got a insignia 160 bhp 2.0 cdti and my sump bolt was that tight the holes was no longer round they were ovel
@jonyr1TT
2 жыл бұрын
Thanks buddy Yes it's not the easiest of cars to do a oil change on.. 👍
@JchaosM
3 ай бұрын
Quick question - did you take your under trays off to do the job or do you just use your car without them?
@jonyr1TT
3 ай бұрын
I put it back on 👍
@CraigsChannel
2 жыл бұрын
After doing my mates Insignia last year and my Astra the other week, I thought to myself 'there has to be a better way of removing that oil filter!' I'm going to try your method of removing the wheel tomorrow and using some cardboard as a kind of funnel, as it doesn't half make one hell of a mess. As others have mentioned that sump bolt was shockingly tight!
@jonyr1TT
2 жыл бұрын
Cheers buddy it saves a lot of mess on the driveway 👍
@CraigsChannel
2 жыл бұрын
@@jonyr1TT Well an update on the oil filter, much easier to take the wheel off... luckily Amazon had just dropped me a new machine polisher off and the box was the perfect shape for a funnel 😄 not a single drop of oil on the arms, boots or anything. I still think its a horrible design, but at least it only needs doing once a year 👍
@jonyr1TT
2 жыл бұрын
Nice one buddy
@johnlong8424
3 ай бұрын
Thank you for the vid it was very helpful. 👍
@jonyr1TT
3 ай бұрын
Glad it helped 👍
@davidramsbotham4230
2 жыл бұрын
Friend tried doing his today. Rounded the sump bolt off as it was so tight!
@jonyr1TT
2 жыл бұрын
Mine was the same you have to be really careful. Hope you can sort it. 👍
@brianmatthews5517
Жыл бұрын
@@jonyr1TT You need to use a 6-sided socket, not those star ones, give the sump bolt a tap with the hammer first, when you get it off make sure you only torque it back to 14nm should be easier to get off next time.
@leebryant1973
Жыл бұрын
It is because the washer on it doesn’t seal after a few uses it has a rubber gasket that crushes so people give it some and the next time it get more I always charge the washer
@projectgaming3364
9 ай бұрын
next time spray some penetrating fluid on it, leave it for half hour and have a cuppa... when you come back it should be better. If not, repeat. It will loosen and saves the drama of rounding it.
@jonyr1TT
5 ай бұрын
👍
@SOLOMOTOUK
3 жыл бұрын
Hi Jon that sump bolt was tight never seen a sump nut with holes in it good idea from Vauxhall that 👍
@jonyr1TT
3 жыл бұрын
Hi Derek . I think Arnold schwarzeneger did the oil change last time. 👍👍👍
@SOLOMOTOUK
3 жыл бұрын
@@jonyr1TT 😂😂😂🤣🤣🤣👍👍👍💪🏻💪🏻💪🏻💪🏻 I’ll be back
@jonyr1TT
Жыл бұрын
👍
@typhoontim125
Жыл бұрын
Great, thank you
@jonyr1TT
Жыл бұрын
You are welcome!
@jasonprendergast7493
Жыл бұрын
Very useful. Thank so much, Sir!
@jonyr1TT
Жыл бұрын
You are welcome!. Buddy 👍
@juliantwigden6628
Жыл бұрын
Ive got same problem with my insignias sump drain bolt-really soddin tight-thats why i cant do it myself
@jonyr1TT
Жыл бұрын
Sorry to hear that. Hopefully you'll sort it out.
@marcpaesen460
10 ай бұрын
Sump bolt 25Nm even as the oil filter housing and fuel filter. All 25 Nm.
@jonyr1TT
10 ай бұрын
Thanks for letting everyone know. 👍
@drefhill
9 ай бұрын
50nm
@jonyr1TT
5 ай бұрын
👍
@Mr_Robbo_G
2 жыл бұрын
Jesus that sump plug was ridiculous. Should only be 25nm on a torque wrench as is the filter housing. Great vid 👌🏻
@jonyr1TT
2 жыл бұрын
Hi robbo. Thanks for the comment buddy 👍
@Mr_Robbo_G
2 жыл бұрын
@@jonyr1TT just got one of these cars myself and about to do a service so really appreciate your vid for guidance.
@jonyr1TT
2 жыл бұрын
No worries buddy good luck with it 👍
@Mr_Robbo_G
2 жыл бұрын
Do you happen to know or have time to do a video on how to remove the rear roof spoiler from the tourer model?
@jonyr1TT
2 жыл бұрын
I have a different car now
@northerner1374
3 жыл бұрын
Why would you do the nut as tight as that! Lucky it didn’t strip the threads! Nice funnel 😂👍🏻
@jonyr1TT
3 жыл бұрын
So glad It didn't snap..👌🔧👍
@Ravsawicki1
Жыл бұрын
25 Nm recommended, and no problem. If problem, means someone did this job incorrectly before.
@jonyr1TT
Жыл бұрын
Hi. Thank you Rafal for sharing this with everyone. 👍
Пікірлер: 48