I saw another video where they clamped a pipe off before retracting the piston. Is that necessary .
@jaysworkshopgarage
6 ай бұрын
not at all
@lucianoribeiro5396
Жыл бұрын
Thanks man. Great video.
@jaysworkshopgarage
Жыл бұрын
Your welcome
@kingrory9613
3 жыл бұрын
Nice one, thanks Jay.
@jaysworkshopgarage
3 жыл бұрын
No problem if the video helped please like subscribe & share 👍🏽
@A7Xdookie
6 ай бұрын
Can these be pushed back using a screwdriver on front and back pads?
@jaysworkshopgarage
6 ай бұрын
yes just be careful not to damage discs if you’re not replacing them
@A7Xdookie
6 ай бұрын
@jaysworkshopgarage cheers mate ill get them sorted this weekend then 👍🏻
@muddymrt
2 жыл бұрын
thanks Jay...job done..
@jaysworkshopgarage
2 жыл бұрын
your welcome
@alexkane5608
3 жыл бұрын
Great video. Thank you.
@jaysworkshopgarage
3 жыл бұрын
thanks
@jeaniekennedy6111
2 жыл бұрын
Great and helpful video. Could you please get a flexible tripod, it would make it so much easier to see.
@jaysworkshopgarage
Жыл бұрын
👍🏽
@mistery00t29
Жыл бұрын
How do you push the calipers back to fit new pads as they are ticker and need more space? Should the piston go freely back without taking off the brake hose?
@jaysworkshopgarage
Жыл бұрын
yes you need a windback tool or before you remove the caliper from the disc you can use a flat screwdriver and wedge it between the disc and pad you should be able to push back the piston
@no1froggy
9 ай бұрын
If you havent got a windback tool just put in one of the old pads onto the piston then use a 'G' clamp on the back of the caliper & the old pad & wind the clamp in, these caliper pistons don't wind in they just push in.
@astanfartin1647
3 жыл бұрын
why u wearin ur sisters shoes?...lol ...seriously tho ...thanks for the lesson buddy...ur the boss
@jaysworkshopgarage
3 жыл бұрын
lol they’re my garage trainers good luck with your brake change 👍🏽
@richardkennedy7941
Жыл бұрын
Are the zafira 1.8i 16valve Sri the same change
@jaysworkshopgarage
Жыл бұрын
Yes should be same set up
@richardkennedy7941
Жыл бұрын
@@jaysworkshopgarage nice one cheers mate, mines literally just went off yesterday and me old Astra gte and Corsa seemed similar and they were an easy change
@jaysworkshopgarage
Жыл бұрын
@@richardkennedy7941 no problem all the best
@delaguettoarcangel
3 жыл бұрын
Can you please list the tools you used?
@jaysworkshopgarage
3 жыл бұрын
17mm wheel nut socket H7 Hex Allen Key for slider bolts Flat screwdriver to gap brake pads & remove retaining clip Wire Brush to clean & brake cleaner Piston rewind tool Anti seize brake paste like cooper grease for example. Hopefully this helps, good luck and please remember to like subscribe & share 👍🏽
Пікірлер: 26