Excellent video. Just changed the discs and pads after watching this, nice and easy apart from stuck on wheels which took a bit of an effort to get off. Many thanks
@alanodonovan3919
Жыл бұрын
Just done mine after watching your video. Took some perseverance with a hammer and some leverage to release the old discs, but got there. 👌 Excellent video. Much appreciate
@simonpratt1716
2 жыл бұрын
Just finished changing the front discs and pads. Performed courtesy of your video. Thank you both for taking the time to upload the video.
@brierleydecorating
8 ай бұрын
Just changed mine thanks to your video. Only problem was the discs stuck onto the hub, plenty of Wd40 and hammering got them off. Thanks a lot for the help
@nigelparish2631
3 жыл бұрын
Really really great video and commentary. Crystal clear with fabulous advice. Thank you for making it
@MrJackd81
4 жыл бұрын
Good video, will be attempting my own brakes now. Saved me a few pennies
@micmut8271
4 жыл бұрын
Excellent video. I´m changing brake discs and pads on on my Renault Trafic tomorrow. I know what is waiting for me now. Many thanks.
@bartlucchini
5 жыл бұрын
Very useful video! Thank you!
@yensabi
5 жыл бұрын
Great video , my local garage wanted £ 250 to change mine , after watching this I'm going to do my own......👍 Good idea about the part no's . Cheers mate
@motomash6143
4 жыл бұрын
Your local garage sound like pikeys lol. 250!! That's unreal... its literally a half hour job. Hope you got them done okay mate 👍
@yensabi
4 жыл бұрын
Hi mate , yes I did thanks to this great how too video , I took my time and did both sides on a Sunday afternoon , I have since replaced the back brakes also which where a bit more of a challenge but turned out good.......👍
@Nutberg20
Жыл бұрын
Thanks for the upload mate 👍🏼
@guinnessdublin4669
3 жыл бұрын
Well explained walk through video Thank You!
@frednetherlands887
3 жыл бұрын
Thank you. Also good advice on the part numbers.
@remingtontanner5004
3 жыл бұрын
InstaBlaster...
@nathanwhiteside9502
2 жыл бұрын
top vid cheers pal
@Sellmyowngranmother
Жыл бұрын
Class gonna do mine soon 👍
@bennoben1653
11 ай бұрын
Great video gents , thanks for sharing 👍
@edonja78
3 жыл бұрын
Please tell me which impact wrench do you use? 
@paulgettings4134
Жыл бұрын
Well explained thanks
@ignaciojaimealaman3664
2 жыл бұрын
Saludos desde cuautla morelos México
@jafahia
3 жыл бұрын
Excellent, thanks. Need to do all 4 of mine. Is it the same procedure on the back? Also, what head did the disc secure screw have, star? Tia
@willber318
3 жыл бұрын
The rears need a wind back tool which you can buy from screw fix for 15 quid
@goranfatah8361
2 ай бұрын
Thank you
@radasjast89
Жыл бұрын
Never put the grease on the hub.
@retrorecordings
4 жыл бұрын
Thanks
@toppertruthio
4 жыл бұрын
Any chance of a link mate to where you got these for that price.Even the drive tec site doesnt recognise the part number?
@repairrestorefixer1242
4 жыл бұрын
The ones I bought and fitted in the video may not be available anymore. But I had a quick look on eBay and found this, search item number 303031478497 if I was to do the job again I would purchase these discs and pads. £48.99 including delivery. You need to supply them reg number to make sure they are correct for your van. Hope this helps. Good luck.
@toppertruthio
4 жыл бұрын
@@repairrestorefixer1242 cool mate,ill give it a go.cheers ,and thanks
@cristealiviu6948
Жыл бұрын
Hi ,do you have to do the brake bleeding ,after ? Thanks
@repairrestorefixer1242
Жыл бұрын
As you are only pushing the pistons back in to the calliper, you do not need to bleed the brakes when you have fitted new pads. Just make sure you pump the brake pedal a few times after you have fitted calliper back on, this will ensure new pads locate where they need to be.
@cristealiviu6948
Жыл бұрын
Thanks for that !👍
@williamusher
3 жыл бұрын
easier to use an s hook than a cable tie
@milovsjako5441
5 жыл бұрын
Hi
@geoffreyking2382
Жыл бұрын
Wouldn't of used the cheapest discs and pads going
Пікірлер: 40