I just installed 2 of these on my full size container and it was easy to install! the construction on these adapters are made with quality workmanship and i would recommened these to anyone thinking about them!
@davesieburg
Жыл бұрын
Thank you for the feedback! We're happy the product worked well for you, and we appreciate your time to share your experience.
@mttrapper
2 жыл бұрын
I bought this product and followed the instructions. No problems at all. I discovered it needed an intake vent so I cut and installed a covered 10"x10" vent in the door of the container. This was a game changer. Prior to this I would park my tractor and PTO driven 68" wide snow blower in the container after moving snow on my property. With the doors closed, the engine heat melted the snow and I would get a tremendous amount of condensation which would then freeze to the ceiling. That was before. Now the front vent in the door and the whirly move the moist air out of the container. No more condensation!
@ContainerCreations
Жыл бұрын
Thank you for sharing your experience with the ventilation adapter!
@CurrentlyRockhounding
6 жыл бұрын
I would love to have this and the skylight for my shipping container shop build.
@avionicstechshop7664
5 жыл бұрын
$270.00 each whirlybird and each skylight. Just so your prepared for the sticker price. www.google.com/url?sa=t&source=web&rct=j&url=www.uscc-us.com/product/adapter/&ved=2ahUKEwjS0KSotJLfAhXBy4MKHVtkAZkQFjALegQIARAB&usg=AOvVaw0m61JGzQBDCqGzTyQQlqWr
@papalilburn
5 жыл бұрын
For that much money I would expect a paper template to facilitate the layout!
@jimcole6423
4 жыл бұрын
And the labor.
@modeverything9949
Жыл бұрын
I see your current model has been updated to a smaller model. Have you considered making one that can hold a RV roof top air conditioner
@modeverything9949
Жыл бұрын
I ask because those whirlybird bird kind of suck. There are so many other options to mount thing that need this corrugated adapter. Dolor power fans rv air conditioners just to name a few
@JasonWW2000
8 жыл бұрын
Have you found that the whirllybird really does prevent condensation and moisture build up?
@Josef_R
3 жыл бұрын
You'd probably sell a ton of these if the price was reasonable. Everything on your website, too.
@thesmokewagon6302
Жыл бұрын
Should be mire like $150
@REVNUMANEWBERN
2 ай бұрын
Since the time that this was posted I'd bet CHINA is sending them in for 1/3
@djabrailntp4436
4 жыл бұрын
Can you make more on containers, ventelletion technics, if in any way can prevent condensation.
@er.7755
5 жыл бұрын
Like buddy said below, $270 for this???
@chiefrunstraincamacho5977
3 ай бұрын
How can i buy this version i cant find it anywhere
@allfiredupltd9108
3 жыл бұрын
I’m not sure if this is a spoof video or not has anyone actually brought this product
@ContainerCreations
3 жыл бұрын
hello Justin, we sell about 50 a month in the summer months. We are a US based business and manufacture the parts in house.
@strawberryplains5029
5 жыл бұрын
Too steep for us $270.00 wow!
@Billy_Darley
5 жыл бұрын
ikr. 30-60 maybe.
@specialized29er86
4 жыл бұрын
Love the product and the cost is okay compared to have a 100 degrees celsius container during the 6 summer months.
@KSTrekker
3 жыл бұрын
For a 40' high cube container, do you recommend one or two vents?
@ContainerCreations
Жыл бұрын
We recommend two vents for containers larger than 20 feet. Thanks!
@eltee9547
5 жыл бұрын
Is this item still available? I tried a few times today to make contact via the phone number listed on the website and no response. Only an automated answering machine. I'd like to purchase one if I can make contact with a live person.
@ContainerCreations
Жыл бұрын
We now have a new version in stock at: www.containercreations.com/collections/active-products
@jimmyparaha925
5 жыл бұрын
you are gona make alot of mony with this idea would you consider shipping it with the drill bits so theres no confusion on how to install it
@tedhargiss1056
3 жыл бұрын
Does the turbine (whirlybird) itself leak when it rains?
@ContainerCreations
Жыл бұрын
Turbine vents are designed not to leak because of the design of the fins. They also sit on the exterior of our adapter so there is no place for water to enter. Thanks!
@billtaylor2324
2 жыл бұрын
Where can I order the FRP (Fiberglass Reinforced Plastic) container vent cap from and what is the order #
@ContainerCreations
Жыл бұрын
We now have epoxy-coated stainless steel instead of FRP for added durability. You can purchase at: www.containercreations.com/collections/active-products
@luisibarra7132
3 жыл бұрын
Will this work for a maxxair fan on a container?
@ContainerCreations
Жыл бұрын
Our adapter only works for vents with a 12" circular fitting.
@michaeldavis8259
3 жыл бұрын
What about the wind load in Florida during hurricane season?
@ContainerCreations
3 жыл бұрын
We guarantee the product in any weather conditions and we have had numerous customers send us pictures of our product in tact after hurricanes and large hail storms.
@grizzly8101
2 жыл бұрын
where can I buy one?
@ContainerCreations
Жыл бұрын
The adapters are available at www.containercreations.com
@lyndenramsey2949
3 жыл бұрын
thanks for this video, not time for me to attempt this install !
@ContainerCreations
3 жыл бұрын
You can do it!
@davemarriott9332
2 жыл бұрын
If you go to this guys website there’s nothing available or pricing Lame. I would hsve purchased one.
@ContainerCreations
2 жыл бұрын
Hello, I apologize, this is true. We have been working hard the last few months to build a new online store and release our new product which will be the same quality at a lower cost. We appreciate you trying to support our small business. We plan to have pre orders available in 1-2 weeks and will fulfill in 4-6 weeks. If anyone places an order after 4-6 weeks you will see a note about fulfillment stating your order will ship in 3-5 business days. We appreciate your feedback and realize it’s frustrating to land on a website that’s under construction.
@EvermontKing
6 жыл бұрын
Just weld it lol its cheaper and you can use a plasma cutter for the roof.
@ContainerCreations
6 жыл бұрын
Evermont King -Thanks for the comment. Good point, if you know how to weld, have the equipment and time. This is an alternative for those that don’t. It’s also easy and quick to install which you can do in a fraction in the time it would take to weld. Thanks! - Liz Forrest
@ottolopez6436
Жыл бұрын
Where do I get your new version
@ContainerCreations
8 ай бұрын
www.containercreations.com/collections/all
@patrickmelson4745
7 жыл бұрын
Would I use adapter one for a 40 foot container?
@ContainerCreations
7 жыл бұрын
Hi Patrick, that would depend on your application/use of the container. For storage you could probably use just one Whirlybird and Vent Adaptor. If you're using it like I use my 45 footer, as an office and seperated work shop we recommend two for adequate ventilation. For questions or to place an order please call us at (831) 515-9991.
@VicsYard
6 жыл бұрын
I like that. Nice video. Vic
@petermurray5786
2 жыл бұрын
270 bucks for a mass produced hunk of plastic? Highway robbery, you should be ashamed!!
@ContainerCreations
2 жыл бұрын
They were $270 a while back as this price included shipping. We then enabled the website to calculate shipping for each order and dropped the price to $200. Those parts were hand made in our shop in California. I agree they were too expensive. We are now releasing a new product that will fit the exact same way, still hold the lifetime guarantee and be made of heavy gauge hot dipped galvanized steel. The new product will still come with all the hardware, sealant and drill/driver bits.. We will sell for $140/kit. I am not ashamed and we have done our best to provide a reliable product that’s easy to install all while only hiring US citizens and paying all associated taxes, workers comp, etc… We will continue to try and bring down manufacturing costs all while providing people with a product they can count on that I have to mention has had a 100% satisfaction rating.
@davidleatherneck
2 ай бұрын
,,@@ContainerCreations I guess the 20$ an hour mandate didn't help. Even the reduced price still doesn't fit my VA Disability budget. Thanks.
@santamariamike
6 жыл бұрын
Hi. Can you use it for a chimney flue?
@ContainerCreations
6 жыл бұрын
Mike Santamaria Hello! We could make you an adapter with fire retardant resin. I would have to find out if there would be a cost difference. Please email our support team at admin@uscc-us.com and we can go from there.
@michaelarnold1590
7 жыл бұрын
Good video but people should definitely caulk each screw head because if you don't they will leak.
@ContainerCreations
6 жыл бұрын
Hi Michael, in the tutorial we specify that one of the beads of caulk goes over all the screw holes before you lay the part down. This is adequate, thank you for your comment.
@ContainerCreations
6 жыл бұрын
In the video we show and instruct to apply one of the beads of adhesive at 1” inside the perimeter. One inch is also where all the screw holes are. Two for one! We have had zero complaints of leaks. Thank you for your comment!
@thesmokewagon6302
Жыл бұрын
Caulk iver screw hole is a great IDEA… but not sane as hoing back wnd caulking individual screws after installation. About 2-5 minutes & less than $2 sealant? C’mon now! Pride in your work
@nickwoo2
8 жыл бұрын
where can we get one?
@ContainerCreations
8 жыл бұрын
Hi Nick, please visit our website: container.parts to place an order. If you have any problems contact us directly at 831-515-9991.
@thomasspinard5977
7 жыл бұрын
Santa Cruz Marine on
@nathanlatimer1841
6 жыл бұрын
Santa Cruz Marine
@ChrisStinnett-db7gv
3 ай бұрын
This product does not come close to fitting or forming to my container. A huge waste of money.
@mikeyadrick5154
4 жыл бұрын
HoRay for 3M5200---For Boats, Houses, Cars or/ Been using it for 50yrs-----Mikey in Sequim, Wa
@ken747
7 жыл бұрын
how do i purshase the peice
@ContainerCreations
7 жыл бұрын
Hi Kenny, to purchase a Vent Adaptor please call our office at (831) 515-9991 and we can process your order for you. For further reference, our homepage is www.uscc-us.com. Thanks, USCC Team
@princekabs4659
6 жыл бұрын
Where to get this product?
@ContainerCreations
6 жыл бұрын
Prince Kabs www.uscc-us.com
@thomassmith7595
3 жыл бұрын
Is this still available
@ContainerCreations
3 жыл бұрын
yes, you can purchase at www.USCC-US.com
@allensmith5714
3 жыл бұрын
$270..... I'll just weld my own air vents, Door and escape hatch
@ContainerCreations
3 жыл бұрын
We have dropped the price to $200 and are work hard to move manufacturing offshore to bring the cost down significantly.
@lexileigh4067
7 жыл бұрын
saw your add on you tube.
@SelvamSelvam-ro8ky
6 жыл бұрын
super
@troyd7464
3 жыл бұрын
Cheaper lol
@ContainerCreations
3 жыл бұрын
We are currently pursuing manufacturing out of the country to bring the price down.
@fiveohgod
2 жыл бұрын
@@ContainerCreations Just moving to a non-communist state would have done the trick.
Пікірлер: 77