Hi..And what when i have oil top of filter housing?
@BDPerformanceWrexham
4 жыл бұрын
Patrik when it’s leaking from the lid you may have a bigger problem I’m afraid 😦
@RTPMLD
4 жыл бұрын
BD Performance im writing on facebook page..
@daniellaverick106
4 жыл бұрын
What sort of problems cause oil on top of the filter housing? Mine is very small amount but i have noticed it
@BDPerformanceWrexham
4 жыл бұрын
Daniel Laverick could be the seal has perished or, on the odd occasion, can point to something more sinister like Crank Case pressure. With a small amount it’s unlikely to be the later! Hope that this helps
@daniellaverick106
4 жыл бұрын
@@BDPerformanceWrexhamthanks for the reply. Can you get a new seal or would it be a case of getting a new oil filter housing?
@CCODEZ
4 жыл бұрын
Glad this video came about when it did. After I did an oil change I thought something was wrong as I could hear a continuous whine sort of noise and was thinking great, I've gone and nudged something causing a failure. On reflection, and thnking rationally, I think it's always been there and once I got my ears into the car it's coming from the AC compressor, also sounds nothing like described, and since seen a few vids with the actual noise, which I have to say your impression is perfect! It's a version 4 too, so hopefully got a few more miles left in it. Blue and red? works for me!
@figotheone
4 жыл бұрын
Another smashing video lads, keep them coming please..... I'm one month into St mk2 ownership and your videos are keeping me busy on my driveway 👌
@BDPerformanceWrexham
4 жыл бұрын
Awesome 😎 - thanks for the comment 🙌
@mattprentice1036
4 жыл бұрын
Hi Darren really appreciate the videos that you and Ben do. Have learned a lot in the short space of time I have been following your videos. The commentary is brilliant. Keep up the good work lads! P.s where abouts are you guys from as I would like some work doing in the future. Many thanks Matt
@BDPerformanceWrexham
4 жыл бұрын
We are based in North Wales - Wrexham to be precise. Great to hear that you are enjoying the content and look forward to maybe meeting you some day. TeamBD
@martinwhitley9893
9 ай бұрын
where do you get the version 5 oil filter casing is it from a main Ford dealer
@tracieoliver2307
4 жыл бұрын
Great Vid Darren and yes currently going through this with my sons ST first noticed the hum then the missfire have filter housing on order! nice touch about the serial number 5 I will look out for it Cheers Terry
@BDPerformanceWrexham
4 жыл бұрын
Tracie Oliver welcome sir 🙏
@sthembisodlamini2277
4 жыл бұрын
I once had that problem, had no choice but to drive off boost for 120kms with the dip stick slightly out. Made it back and immediately changed it. Would not recommend anyone to do that though!
@BDPerformanceWrexham
4 жыл бұрын
Sthembiso Dlamini many are in the same boat; you certainly aren’t alone. Thanks for watching and the comment 🙌
@Richieesgarage
4 жыл бұрын
the first problem I had with the car was my Diaphragm going, looking to go breather kit now as apparently the standard housing wont cope past 500bhp, Good video bud
@BDPerformanceWrexham
4 жыл бұрын
You’ll be fine up to about 500 on a standard filter housing. People over 400 just choose them to save ring landsman stock internals in an RS Setup usually. Can’t wait to see where the build is headed! When is the next video?
@Richieesgarage
4 жыл бұрын
BD Performance when this weather lightens up just been busy at work tbh I did record taking my engine out don’t know how good the quality is cameras been messed up recently all the settings wiped off
@BDPerformanceWrexham
4 жыл бұрын
03ANO ahhh what a bummer! Hope you get the camera sorted and continue with the great content buddy 🙌
@ryanst5006
4 жыл бұрын
Apache Darren 😂, yeh to easy these days for people to jump to conclusions and jump on social media and start the blame game before knowing the facts! great vid nice to know what to look out for 👍🏼, look forward to up coming vid 🤘🏼
@BDPerformanceWrexham
4 жыл бұрын
Exactly - point well made Ryan! Pretty much what we were getting at in fairness. Thanks for the continued support 💙
@ryanst5006
4 жыл бұрын
I work in the trade too so know the script 🤦♂️lol
@stephenstyles4938
4 жыл бұрын
Love it guys
@BDPerformanceWrexham
4 жыл бұрын
Thanks buddy
@garymugford3273
4 жыл бұрын
Love the vids 👍👍 keep em coming!!
@BDPerformanceWrexham
4 жыл бұрын
Gary Mugford thank you so much 😊
@zman86turbo
3 жыл бұрын
Hate it when customers come to me and say since you’ve had my car....
@tonypressley130
2 жыл бұрын
Hi Darren massive fan of you and the boys awesome channel I have a version 5 housing I have a leak which appears to be coming from the top of the housing not sure if it’s housing on top or possibly the elbow going to the engine. Any ideas cheers
@DriveWayRay
4 жыл бұрын
Fantastic impression Darren 😂. Gonna have to check my housing version number tomorrow as mine is also a pre-facelift. Is it worth changing if it’s a version 1?
@BDPerformanceWrexham
4 жыл бұрын
Fr33jack depends how you look at it but prevention is often better than cure! Thanks for the continued support and the mentions 🙏
@bones435
4 жыл бұрын
Another great video 👍🏾 Is it by the last number which tells you what version you have?
@BDPerformanceWrexham
4 жыл бұрын
Yes it’s the last number on the lid that denotes the version. Thanks for the comment and feedback 🙏
@davymac9062
4 жыл бұрын
Roll on the 12th next mounth Im getting the BDP oil breather kit Fitted 👍
@BDPerformanceWrexham
4 жыл бұрын
davy mac thanks Dave, that’s a good upgrade for you with the RS Turbo. Not such a necessity for any of the ST Turbo lads though 💙
@garymugford3273
4 жыл бұрын
Yea but it does look bloody good 🤩
@thomasgamer9658
3 жыл бұрын
What the best one to go for
@BDPerformanceWrexham
3 жыл бұрын
Genuine parts listed on our website: store.bdperformance.co.uk
@chrisbaxter5041
4 жыл бұрын
So im running the version 4 however I have the start of the whistle minor but progressive also slight weep around plastic cover where part no is.
@martinwhitley9893
10 ай бұрын
I’ve got an oil leak on my focus st225 would it more likely be the oil filter housing or would it be the oil cooler help would be very much appreciated
@filippofiorito2494
Жыл бұрын
Hello 🖐️ thanks for the video, it was very helpful. I wanted to ask you, why does the pcv circuit have to go into the intake, it can't discharge into the air?
@seandoyle4671
2 жыл бұрын
Hi I'm get a squeeling sound on start up then goes I've changed boost solenoid and when I lift dipstick no change ?? 57plate st focus thanks sean
@yffick22
2 жыл бұрын
where I can find this large open front bumper grill ? anyone knows ?
@martinsneddon9415
3 жыл бұрын
Hi guys, quick question for you, my 57 plate st225 has got an issue with the oil filter housing, it’s actually leaking better the plastic meeting the casing is there a reason what could of caused this? The previous owner has replaced the the housing in the past. Thanks for ur help
@BDPerformanceWrexham
3 жыл бұрын
Which version do you have fitted?
@martinsneddon9415
3 жыл бұрын
@@BDPerformanceWrexham im not sure if im being honest but the part number on the black casing is 31338685
@jacktrek5851
3 жыл бұрын
I changed the diaphragm recently and stopped this noise, but with an issue I have with my car, I've had the car checked out again and have been told the full housing unit has failed and causing the diaphragm to stick open or shut at times, is this common? Fuel trim was well out and confusing the maf and fuel making it run lumpy, quick question, had full service less than 100 miles ago, could I just top oil up instead of full change? Thanks mate, love your videos
@damo8754
3 жыл бұрын
Having a nightmare finding the version 5 part, Ford has ordered the part for the RS but not called version 5? You guys are doing my block mod but I don't think I can wait for the housing
@BDPerformanceWrexham
3 жыл бұрын
You can order from our web store; we have stock I believe at store.bdperformance.co.uk
@damo8754
3 жыл бұрын
@@BDPerformanceWrexham great thanks guys, I can go see it in the morning he said its the part that goes on the mk2 RS. If the numbers don't match 31338685 il buy yours. Its certainly leaking a little more than before 🤞
@styusuf5671
4 жыл бұрын
😱😱😱 Is the version 5 the updated one with the stronger diaphragm? Maybe I should get mine changed when I come up to get the other things done.
@BDPerformanceWrexham
4 жыл бұрын
ST Yusuf is yours a Version 1?
@styusuf5671
4 жыл бұрын
Will have to double check but I think so bud and I’m sure it’s only a matter of time before that gives up!!
@paulstewart8363
4 жыл бұрын
Loving the content I’ve just noticed my st making a whistle noise so I’m changing the oil filter housing do u think I should do the cam seals as well plus would u say it’s on easy diy job or better getting a professional to do it
@BDPerformanceWrexham
4 жыл бұрын
Paul Stewart just check and monitor the seals. If the belt isn’t wet, there is no weep - then no need to change. But do keep an eye just incase it’s a delayed issue which can often occur. Good luck, thanks for watching and thank you for the comment 💙
@NightskyFusion
3 жыл бұрын
What's the song that starts at 3:56? It's really good!
@daniellaverick106
4 жыл бұрын
Great vid. When fitting the new oil filter housing what torque do you fasten the bolts up to?
@BDPerformanceWrexham
4 жыл бұрын
If you have a torque wrench to hand then that size fixing is usually 18nm but we can check the exact spec when back in work tomorrow sir! Hope that this helps and thanks for the comment 🙌
@martinpearcey3671
2 жыл бұрын
Hello bud I go a 55 reg st2 it remap to 290 bhp will it need a block mod done and how much for u to do it thank u merv
@BDPerformanceWrexham
2 жыл бұрын
The question is; the Block Mod - is it worth not doing it and taking the risk? Put that way then the answer is no. Against the cost of a Cambelt/Timing Belt job alone, the Block Mod isn’t much more money! We offer Block Mod alone for £649 or Block Mod and Water Pump for £748! You can book and pay online at store.bdperformance.co.uk or call us on 01978 758598 🙌
@jamiejeavons9755
2 жыл бұрын
Would the filter housing cause a boost leak?
@jameslotter6283
Жыл бұрын
Hii...i dont have an indian whoa whoa noise but, when i floor the car it spills oil al over the inside of the bonnet and the oil filter hosing
@alexpaver4854
6 ай бұрын
Did you find out the issue as I have the same issue, seems to be spewing out
@richardts8858
4 жыл бұрын
My housing number on top ends in 84,is this a new part I have?
@BDPerformanceWrexham
4 жыл бұрын
You have a version 4 sir which is still upgraded and is less likely to fail than a version 1z
@shelf9876
Жыл бұрын
I've just bought a st2. What's the signs of a failing pcv.
@eweaver4087
3 жыл бұрын
Do you need to drain the oil before changing the oil filter housing?
@BDPerformanceWrexham
3 жыл бұрын
This can be done without changing the or dropping the oil, however the units normally have a new filter so we would recommend renewing. Happy New Year 🥳
@leemarshall1792
2 жыл бұрын
Is it ok to just change the diaphram?
@williN57
2 жыл бұрын
How many hp can i drive with the stock pcv?
@shaunclarke7171
4 жыл бұрын
How come so many change the whole oil filter housing when the diaphragm inside alone can be changed? Wouldn't this solve the issue??
@BDPerformanceWrexham
4 жыл бұрын
Great comment - some do buy the cheap foreign replacement diaphragm - however Ford / Volvo incorporated the vent for a reason. Simply replacing the diaphragm is not something we would consider for this very reason.
@shaunclarke7171
4 жыл бұрын
@@BDPerformanceWrexham fair enough thanks for the reply
@BDPerformanceWrexham
4 жыл бұрын
Shaun Clarke very welcome 🙏
@openmicsandacts
2 жыл бұрын
Just had mine changed. It then lost half of the coolant. The garage said it had a air lock and sorted it out. But now it's dropped coolant again and has slight milkshake in the oil cap. It's back to the garage Thurs. Lost to what to do now is it the oil housing? Is it head gasket?
Пікірлер: 85