Another great vid, man! I like the showing off of the smelter, constructor, and assembler blueprints working together - helps it all come together into one picture. Well done!
@Cyanogenmod_
6 күн бұрын
Thank you! Glad to hear! I’ll be sure continue that for future design vids!
@TheUlf
5 күн бұрын
Ooh, really dig the aesthetic of having the frame floors at the top of a block/the bottom of the logistics floor with the glass floors below the machines/above the logistics. Great, clear blueprint tutorial, too!
@Cyanogenmod_
5 күн бұрын
Thank you! I’m definitely not the best builder but I have my moments 😅 glad you enjoyed!
@squeaccups4761
6 күн бұрын
Great content, I'll be trying these blueprints to rebuild my starter factories. Keep it up!
@Cyanogenmod_
6 күн бұрын
Thank you! I’d love to know how it goes!
@squeaccups4761
5 күн бұрын
@@Cyanogenmod_ I have tested them with success! A modular frame factory was made using a array of stacked iron smelters along with constructors and assemblers. Having the cast screws recipe made the process easier. Can't wait to build more. Thanks so much it's been fun.
@Cyanogenmod_
5 күн бұрын
@@squeaccups4761 Nice! 😎 that’s what I like to hear!
@FrankBronsonUK
6 күн бұрын
Must say I am really enjoying your channel especially this blueprint series, very well done, please keep up with the quality content.👍
@Cyanogenmod_
6 күн бұрын
Thank you very much! More on the way! Also great profile pic! 😎
@chasecomfort3940
5 күн бұрын
Really clean, I like the idea of priming the machines with the ore input buffer
@Cyanogenmod_
5 күн бұрын
Thank you! It definitely helps get everything run faster!
@sync3953
5 күн бұрын
These are some amazing blueprints! Well done! I'll definitely try using these to make my factories look cleaner and space-efficient!
@Cyanogenmod_
5 күн бұрын
Thanks! I hope they help!
@duaneshaffer4427
5 күн бұрын
This is great. I love the vertical expansion you can do.
@Cyanogenmod_
5 күн бұрын
Thanks! Vertical is the way to go!
@leesmith5420
6 күн бұрын
These are great, no-nonsense blueprints.Thanks!
@Cyanogenmod_
6 күн бұрын
Glad you like them! Thank you!
@Bigjimi6was9
5 күн бұрын
I broke my rule im saving time and using yours instead of creating all my own. Thanks man
@Cyanogenmod_
5 күн бұрын
lol glad I could help! You can always tweak them to make them your own 👍🏻
@wybrenwalinga6830
5 күн бұрын
Amazing guide, thanks!
@Cyanogenmod_
5 күн бұрын
Thank you!
@Fa11out
6 күн бұрын
I like these designs. i used your constructor one for a build I'm doing that needs 140 constructors. was looking for a good blueprint to make it faster and found yours. You're making them in a mk1 blueprint machine so I just followed the video and re-made them into a mk2 blueprint machine, which for the constructors means a single blueprint can have 20 constructors thanks to the larger blueprint machine. Huge help to plop that many down at once. I'll try this one in an Mk2 as well and see if maybe I can squeeze an extra assembler per floor too
@Cyanogenmod_
6 күн бұрын
That's so awesome! This is what I meant by taking them and making them yours I love to see it! You can fit up to 3x assemblers in the Mk.I, its just very cramped so it will 100% work in a Mk. II! Would love to hear how it works out for you!
@Fa11out
5 күн бұрын
@@Cyanogenmod_ yea 3 assemblers per floor fit just fine on an mk2, maybe could have squeezed 4 per floor but i think it would have gotten really cramped so I stuck with 2 floors of 3. Between that and the 20 constructor blueprint I was able to complete my build for 50 automated wires per min pretty quickly.
@Cyanogenmod_
5 күн бұрын
@@Fa11out that’s awesome! I’ll have to keep that in mind and possibly make one for myself as well! Love to see you making them yours!
@nycos84
6 күн бұрын
I am very satisfied with this series of blueprint. Will you make a more advance factory? (for exemple smart plating or motors?)
@Cyanogenmod_
6 күн бұрын
Thank you! I do have a few videos on “one click blueprints” for stuff like Rotors, Reinforced Plates and Modular Frames. These could be combined to make a simple smart plating factory however I plan on making a guide on how to plan large factories for stuff like motors!
@draguu8987
5 күн бұрын
This is helping so much ! Subscribed and liked !
@Cyanogenmod_
5 күн бұрын
Thank you! I’m glad they’re helpful!
@azofshadowmore
5 күн бұрын
Just a note, if you hold ctrl while changing from floor to metal frame or glass it will let you replace without deleting first.
@Cyanogenmod_
5 күн бұрын
I just tried this and had no success, is there a setting I need to turn on? I would love this feature!
@azofshadowmore
5 күн бұрын
@@Cyanogenmod_ should be just vanilla with no settings to turn on. I use it with doors and messed up splitter/mergers all the time. Hmmm
@Cyanogenmod_
4 күн бұрын
@@azofshadowmore interesting I’ll look into the keybinds, maybe I changed something by accident. That sounds like a super helpful tip so I definitely want to start doing that!
@azofshadowmore
4 күн бұрын
@@Cyanogenmod_ haven't been able to test as I am at work now, but I am starting to wonder if it doesn't work on the architecture items.
@Cyanogenmod_
4 күн бұрын
@@azofshadowmore That was it! It does replace stuff like wall types and splitters to smart splitters. I can't do foundations as it enables the rotation, but other stuff does get rebuilt! That's super good to know I doubt I would have figured that out, thanks! Being able to change a wall around is going to be way easier!
@TapeMaster3
3 күн бұрын
Great videos! You won't be able to scale this vertically though - 6x40 screws per minute is the bottleneck for your mk3 lifts and belts. So you will have to re-build those too!
@Cyanogenmod_
2 күн бұрын
Thank you! You can absolutely continue this by simply upgrading the belts as you go! You can upgrade existing belts so by going to Mk. 4 belts you’d be able to add 6 more.
@TapeMaster3
2 күн бұрын
Agreed! I just find the belts/lifts upgrade the most tedious part of modifying the build.
@Cyanogenmod_
2 күн бұрын
@@TapeMaster3 oh for sure I’m with ya there lol I almost always seem to miss one lift or belt too bottlenecking everything 😂
@olegmakogon7447
6 күн бұрын
not bad. Just simple option with great possibility to expand.
@Cyanogenmod_
5 күн бұрын
Thanks! That’s the idea 😎
@sergeyleshchuk2866
5 күн бұрын
Waiting for the manufacturer blueprint!
@Cyanogenmod_
4 күн бұрын
I’ve got that video planned, I’ll be recording it today! 😎
@Hocchibi
2 күн бұрын
How do you snap the merger/splitter clipped directly into the conveyer lifts like you do at 1:52? Is that a part of the base game? I feel like I might have refactor all my blueprints if I somehow never noticed I could do this... Even if I may be uncomfortable with the theoretical clipping of merger/splitter and lifts, I love the idea of frame ceiling and glass floor to expose the logistics floor. I'll have to get my silicon production up a notch just so I can start replacing all my flooring with glass haha.
@Cyanogenmod_
Күн бұрын
Yes that is part of the base game! If you aim at the lift while placing any merger or splitter you can snap it to it! Glad you liked the floor/ceiling! Lol there’s always something else we need to first 😂
@Hocchibi
Күн бұрын
@@Cyanogenmod_ Goodness, I just got home and checked because I didn't believe. The things you learn even after 250 hours in the game T_T. I also didn't even check that glass foundations don't use silica which was a bad assumption of mine. Guess I can replace everything with glass :D
@Cyanogenmod_
Күн бұрын
@@Hocchibi lol I’m learning new stuff after 1,300 hours 😅 also so true I totally forgot, just steel and concrete so you’re good to go!
Пікірлер: 49