YOU ROCK ALLEN.... can't wait for Discovery to have you as spot on a TV welding show 👍 much love brotha God Bless
@dontblameme6328
4 жыл бұрын
Why would you want the corporate TV beaurocrats to ruin his good content?
@KnightOfTears
7 жыл бұрын
Top notch as always! Your attention to detail is a lost art. Can't wait for part 2 and see the finished product.
@boatstrips
7 жыл бұрын
So glad I found this channel. Subscribed. Your videos are great Allen. Can't wait to see the rest of this build.
@johnwilkinson1302
7 жыл бұрын
Another great looking smoker. Can't wait till part 2.
@kennymysak2079
7 жыл бұрын
Another great build. Keep up the great video's
@TeleBass1
7 жыл бұрын
Great Job Allen! I love watching you make all these smokers and grills. Keep up the great work. I'm in Texas and it's really heating up. Stay Cool!
@danielmiller6871
5 жыл бұрын
Dang, effecient and amazing welding skills. He's dialed in for sure. Well done!
@gregorystarks5429
6 жыл бұрын
I have mad respect for you. Good work you are doing. Can't wait to follow your example.
@gregsullivan8956
7 жыл бұрын
Allen thanks for the video. I really enjoy your superior work ethic and skills.
@wetdedstuocm
7 жыл бұрын
The way you handle a torch is remarkable, Very good work .
@hassanhoward2883
6 жыл бұрын
How much for one of them
@moncorp1
4 жыл бұрын
@@hassanhoward2883 ~ What's 'them'? You're on the internet you lazy twat. Do a search.
@BigLou956
7 жыл бұрын
That's gonna be a nice smoker... Nice work Allen... Can't wait to see the final product...
@4seasonsbbq
7 жыл бұрын
Another great lookin build Allen, can't wait for part two. Im building an octagon offset smoker myself totally inspired by you, I'll send you pix when I'm done, I've been workin on this thing on and off for three weeks. Lots of work. Keep up the great work my friend.
@louissport6663
5 жыл бұрын
Just watched another video of your offset smoker/grill, I'm from Massachusetts, I would love one of your pits. I'm saving up for one. I'm also just starting as a welder, your instructions are very helpful and inspiring. God has blessed you with the ability to explain your work so people can understand easily.Keep them coming.Louis7808
@arthurwagar6224
3 жыл бұрын
I'm researching before building a large stnl steel vertical smoker. Thanks for the info. It's 101°F here right now. Easier to watch than build. Lol
@thomascollier4913
5 жыл бұрын
I have never seen someone use a torch as well as you do!!! I have 40 year's in the trade. Great Video 👍👌👍
@Allensweldingwoodworking
5 жыл бұрын
Thanks!
@jamescosta1174
4 жыл бұрын
Agreed. Outstanding hand literary Allen, you're awesomely honed In precision, and calm.. true master designer artist, times twelve j
@jamescosta1174
4 жыл бұрын
Oh and cant wait to see you assembly line those parts and racks and things, very patient and coo!
@njdownhill
7 жыл бұрын
You are an artist with that cutting torch.... Nice work...
@minerdad02
3 жыл бұрын
Still wish he lived closer awesome work and work ethics
@jasonturner1045
7 жыл бұрын
Another nice build. You're free-hand torch skills are amazing.
@justinkredable369
6 жыл бұрын
Jason Turner phenomenal with a torch.
@kerrydills3240
7 жыл бұрын
You do some awesome work,sir!
@longevitywelding
7 жыл бұрын
Sweet smoker Allen. Great work
@franciscobarajas2378
7 жыл бұрын
Allen you are a real professional welder man, nice video
@mikegrayjr6527
7 жыл бұрын
now that look like my type of smoker there can't wait to see it all done
@garymccraw1466
5 жыл бұрын
Wow Allen your Amazing Welder. and that's gonna be one Awesome Smoker.
@kurtgrates4964
7 жыл бұрын
you are very good and your product looks fantastic...thanks for the vid
@eddydianne
7 жыл бұрын
Great Job You Two, Keep Going STRONG,,, Bless
@adnacraigo6590
7 жыл бұрын
You are the MAN with an acetylene torch!
@micahguerrero1300
7 жыл бұрын
Allen all of your projects are bad ass. But I really like this one.
@RetiredTony
7 жыл бұрын
Great job man!
@zaklloyd4335
5 жыл бұрын
Looks hot Al. A coupla cold ones may help! Great work, man!
@certifiedweldor
6 жыл бұрын
looks great man,
@nscalegary1
7 жыл бұрын
I have been working on my 24×48 smoker with a 18×18 fire box for the last 3weeks or so. Watching you do your thing has helped me get this thing built. Thanks bro! I will be making a video soon on my channel nscalegary1 that's me.
@koryw4468
6 жыл бұрын
how thick of steel you using?
@nscalegary1
6 жыл бұрын
Kory W i built it using1/8th plate. Buy the time i got a response from Allen my fire box should have been 3/16s. But it works fine just had to tighten the door up with some angle iron.
@antoniocarter8245
6 жыл бұрын
nscalegary1 have you finished your smoker and do you have any pictures also how do you like it
@nscalegary1
6 жыл бұрын
Antonio Carter. Yes i did finish the smoker and it works great! Been using it since August. I have a video on my KZitem page Nscalegary1 and i have a Facebook page where i started Stephanie's Smokehouse BBQ look me up. I love my cooker so much im thinking about doing another one but this one is going to be a barrel style using 24in tubing 1/4in thick. But before i do i'm going to build a trailer around this one. It weighs about 700lbs.
@reddsaxxmike2865
4 жыл бұрын
Took my hard to use 'new braunfels vertical square smoker', to a shop and in about a hour the gentleman fix all of it's issues.
@88MADAVE
7 жыл бұрын
Great job Allen
@davidalvarado733
4 жыл бұрын
Its cool to see all of your tricks of the trade.
@setobama
6 жыл бұрын
Great job mate
@raytempleton5463
6 жыл бұрын
The man has skills!
@koryw4468
6 жыл бұрын
Allen can you share some details on the steel your using? How thick is it? What size square tube are you using on your racks? Much appreciated
@mechellemcelfresh3844
2 жыл бұрын
Works great
@loadpin
7 жыл бұрын
Another great job Allen. Do you have a website with all your items that you could possibly post a link to in the description to purchase items from.
@edwardwright5388
7 жыл бұрын
@Allen..Don't worry bout the heat bro. At least it's not raining! :)
@gabinoflores8267
3 жыл бұрын
Muy buen trabajo buddy very good job welding torch and fabrication ..amazing
@raymondmoreno317
7 жыл бұрын
Great job
@goodtimeshuntintv1554
7 жыл бұрын
Hey Allen! Is there any chance you could share details about your radius jig you use? I know you built it, but I can't find a video where you have talked about it and that thing works great! Keep up the great work, sir!
@johnv5718
5 жыл бұрын
Awesome, wish I could use a torch like that.
@alextorres6333
5 жыл бұрын
Thank you for the information
@gonza411
7 жыл бұрын
very nice!
@randygerman5437
7 жыл бұрын
Dude, great video, I'm subscribing. I know it's hot where you're at but you gotta protect your skin when welding, a long sleeve t-shirt and a fan would help. That being said I doubt that I could get away from the a/c if I was there!
@reddsaxxmike2865
4 жыл бұрын
Lower the fire box and chopped the lid on the fire box as well. Then he built a lipped defuser/restrictor for the inside, which deverts the heat from rushing out the vent. My idea.
@beastlyweldz5424
7 жыл бұрын
Your videos are awesome man. I hope i get to your skill level one day. I made a small pit just by watching your videos. I made a video on on my channel. Thanks man.
@unclefrankonap1953
7 жыл бұрын
love your work what gauge metal is that metal. your using for this work.
@robertclark4275
4 жыл бұрын
Hey Allen I like your work you do good work I just think you should consider designing your shelves to fold away to be removable especially for those mounted on trailers. Just a thought What do you think. 😎
@todd942
7 жыл бұрын
I'm amazed at how fast you work... kick ass pit, great design and execution...
@zeroninejames9507
5 жыл бұрын
Your right arm sure has good tan bro.👍
@javiermedina2140
7 жыл бұрын
Allen if you don't mind me asking what size of mig are you using? Love the videos and appreciate the craftsmanship you have! Which I had a steady hand to run a torch like that. Keep up the good work and keep them videos coming.
@timmizell5472
7 жыл бұрын
Do do awesome work. Question for ya. What type wire and welder do you use.
@5497354973
7 жыл бұрын
Nice but you have all tool outside what you do with them wen it´s raining? i wish you nice workshop God Bless
@ovi_s
5 жыл бұрын
Nice build man. I want to build one too, but little smaller. Can you give me some pointers? Like how large do you make the connection hole from fire box to the smoker?
@davidbrockett1
5 жыл бұрын
Nice build you've inspired me to build one what paint do you use and do you paint the inside as well ??
@mikeamos5260
7 жыл бұрын
Great torch hand Is the expanded metal plain steel ?
@rbr6852
7 жыл бұрын
No dont let Discovery ruin this great work! Keep em comming!
@garyteague9555
6 жыл бұрын
that’s 1/8” plate
@atomicboomstick2543
7 жыл бұрын
Have you ever tried to make a box smoker like this by bending the sheet metal into shape? Im not a metal worker but it seems like it would take less time what with less welds and cutting metal. I might be wrong but im curious about it.
@jentzenandshingshing8013
6 жыл бұрын
Hello. I would like to try and make one of that here in philippines. if you don't mind, may I ask what are your measurements on this? thanks
@fidelsfabandmetalworks2545
6 жыл бұрын
What size half moon going into main chamber from hot box should I cut mine? Main chamber is 20” Wide, 24” deep” 48” tall
@x01e
6 жыл бұрын
Materials? Kind of steel and thickness? Grates type of steel?
@alextorres6333
5 жыл бұрын
What size metal do you use for the vertical smoker?
@rcdcnc
7 жыл бұрын
how hot is down there in Louisiana Allen? I'm in Texas it's pretty hot down here
@killxswitch
6 жыл бұрын
Dig that shirt Allen! Ha ha.
@ericestelle7485
Жыл бұрын
How much do you charge for a smoker on a trailer? Bout a 200 gallon, firebox with a warmer on top
@marcosantoniodasilva1629
4 жыл бұрын
🙏🏻👏🏻👏🏻👏🏻
@marcusrogers6954
5 жыл бұрын
How many hours did this project take ?
@solargod3671
6 жыл бұрын
Yall looking at a real man
@dpatterson5729
7 жыл бұрын
I've been subscribed to your channel for a while now and I am looking to purchase a fire pit and a vertical smoker from you. I would like to get you contact info if thats possible. I can email you my info if need be.. Keep up the great work.
@charlesbugeja4273
7 жыл бұрын
Hello Allen, I have watched all your videos and I think that saying you are good is an insult to your skills. God gave you about a steady hands as a surgeon. Have you ever thought about building a steel fishing boat for your family of light gauge, god knows you have the skills for it and that might lead to more work as well. Wishing all the best to you and yours. Best from Canada. PS, I subscribed because you definitely earned that.
@kojomensah7474
7 жыл бұрын
Are u using flux core wire???
@michaelnulton9123
5 жыл бұрын
What are the dimensions of the vertical box?
@bounpheng4197
6 жыл бұрын
Great video but looks heavy really heavy
@user-gq5ge1mu5j
3 жыл бұрын
Лайк 👍👍👍👍👍
@eliazarlimon5623
6 жыл бұрын
I think it's time to invest in a plasma cutter and good work.
@moncorp1
4 жыл бұрын
why? He kicks ass with oxy/acetylene.
@justinrichie2598
7 жыл бұрын
How much does that cost it's exactly what I want
@JohnLopez-jt1cj
4 жыл бұрын
Wut thickness is that plate you using?
@alextorres6333
5 жыл бұрын
What's the thickness of the metal?
@aimanyunuz8140
6 жыл бұрын
hii do you happen to have all of the dimensions?
@JohnLopez-jt1cj
6 жыл бұрын
How wide is that vertical
@sttm1283
7 жыл бұрын
Hey Allen. u use pretty much expanded mesh. how much do you pay for a sheet? lets say 1250x2500mm. here in sweden its expensive as hell.
@throughmylens5127
6 жыл бұрын
Micke where I am at about $50.00 us
@carnellcheevers7056
2 жыл бұрын
What are the measurements?
@BGCoop79
7 жыл бұрын
Are you taking orders?
@christianfamily8540
5 жыл бұрын
Could I order a vertices smoker from you and have it shipped? I live in Chicago , what would it cost me?
@Allensweldingwoodworking
5 жыл бұрын
You can email allentubbs31@gmail.com for orders, I dont ship often but I've had several people come down from Chicago to pick up, I do deliver some places, price depends on distance
@johnstiller2852
6 жыл бұрын
Hey Allen the doors u measure inside how much space u leave gap so door won't have problems opening and closing and are u Gunn a show how it's done cuz I had a customer want one but they wanted door to go around like an angle iron go around it not flat
@robwakefield4699
2 жыл бұрын
Does anyone have an idea what thickness the steel is??
@Allensweldingwoodworking
2 жыл бұрын
Depends on what the person orders
@josephcoates461
2 жыл бұрын
😁😁😁😁😁😁😁😁
@alextorres6333
5 жыл бұрын
And how much is it to buy? $=? Thank you
@Allensweldingwoodworking
5 жыл бұрын
They are $750
@alextorres6333
5 жыл бұрын
What's the metal thickness an approximately weight? I'm in Tampa Florida
@Allensweldingwoodworking
5 жыл бұрын
@@alextorres6333 built with 3/16" steel plate, chamber is 20"/20"/3' tall, fire box is about 20"/16"/16", about 175 lbs I'm guessing
@donnyjenkins8603
7 жыл бұрын
shawty
@jpascaln
3 жыл бұрын
Your skills are very obvious. I laugh when I watch other videos and see more grinding than welding. A good welder doesn't need a grinder.
Пікірлер: 112