That's great - but stupid question coming up. Are all cutters the same length? Do you have to compensate for that regards the Z axis? I presume the cutter always sits the same distance inside the chuck as well, or that would throw you out? Sorting out space for a model metalwork shop now, aiming to make chips in about 6 months!
@Blondihacks
4 жыл бұрын
Not a stupid question at all, and something I should have explained. If you change your cutter, you lose your Z position and you have to do the shim trick or touch off again. For this reason, try to plan as many features as you can with the same cutter. There are tool changing systems that are repeatable in Z, but for simple tool holding in collets like this, we’re on our own. I’m gonna pin this question because a lot of people are asking and it’s a great one. Thanks for asking! 😁
@andyZ3500s
4 жыл бұрын
Chris there are no stupid questions when you are new to any trade. I wish that You Tube was around when I started machining. It would of saved me alot of frustration. Just remember that nobody knows everything and you never stop leaning.This channel and Mr.Pete are great for beginners. Mr.Pete has hundreds of shop tips videos start at the beginning and go through them. Good luck to you.
@grymgaming5541
3 жыл бұрын
@@andyZ3500s ill tell ya what, im in machinist school and im leqaps and bounds ahead of every one else cause i sit at home and watch every machining video i can
@andyZ3500s
3 жыл бұрын
@@grymgaming5541 That's good to hear. This can be a game changer to get someone ahead. This could of took years off my learning curve. Just remember that you never stop leaning. Good luck to you.
@77Avadon77
3 ай бұрын
One of the best reasons to touch off while the mill is running is because you can break the little teeth off your cutter very easy, and good cutters are not cheap. (Don't ask me how I know)
@ComplexPole
Жыл бұрын
Thank you for stopping the spindle when the edge finder kicked, that made it finally click for me.
@TheRadioShop
4 жыл бұрын
Great tutorial Quinn. A double feature. Not only how to make a part but also how to set up your tooling. Brilliant!
@ginox4884
4 жыл бұрын
I don’t know if you need to hear this at all, but I feel compelled to say (type) it anyway … Dear Blindihacks, You’re ace! Fab channel. Excellent delivery. Brilliant insights. Fine demeanour. I love your videos. I don’t know how long you can keep this up (such excellent content), but … I hope it is a long time. Very thank you very much … very! Kind Regards and Very Best Wishes, UK John The Very British Engineer
@Blondihacks
4 жыл бұрын
Such kind words, thank you! I always appreciate hearing it. 😊
@tnekkc
4 жыл бұрын
I watched the whole 28 minutes, even though I knew it all [I have owned and used mills for 20 years]. I just wanted to see the excellent production qualities of this Blondihacks video. If you think you understand something, try explaining it. Blondihacks has got to understand a lot of things very well to explain them this well. The material is presented in careful order, it seems like she knows what I am thinking.
@Blondihacks
4 жыл бұрын
Aww thank you for the kind words, and for sticking with me through all 28 minutes. 😁
@aliaj00
Жыл бұрын
Just got pm40m with hardened ways. And she is a very good teacher. Thanks a lot for you invaluable help to us 🙏🙏
@kevinetheridge6153
4 жыл бұрын
Your videos are so excellent. I know they’re specific to machining, but the principles and organization and even a lot of the techniques really seem applicable to a lot of areas. Kudos and thank you as always.
@Blondihacks
4 жыл бұрын
Thank you very much! ☺️
@steved8038
4 жыл бұрын
Once again a clear and easy explanation for the amateur to follow , Thank you although I have been using a mill for a great many years I find your videos refreshingly clear and simple whilst covering all aspects and methods available looking forward to p.c.d. and inclines ! .
@daveryckman711
8 ай бұрын
can't stop learning from these videos
@billbaggins
4 жыл бұрын
Skills are evolving, you should write a book..." On the species of origin "
@apachesmokemachining6487
4 жыл бұрын
Love the graphics, looks great
@DudleyToolwright
4 жыл бұрын
A couple of suggestions. One: if the features of the part are symmetrical about an axis, say the centerline, then it is better to use that as your zero so that even if the stock dimensions are off the features will all be accurate relative to themselves, which is often important. Second: another very accurate way to find your z-azis zero is to take a cut, measure the cut depth carefully, dial back to compensate and set your zero. I realize that you had a lot on your plate with this discussion and you did an excellent job. You are always very clear and concise.
@GrandadTinkerer
27 күн бұрын
Hi Quinn. Long time subscriber here. Finally treated myself to a second-hand mini mill, hence returning to this video to try to absorb some wisdom. I was determined to use the hand wheel graduations, as I didn't really have the extra cash for a DRO. The mill that I have is metric, which should be fine for me. However... The X and Y axis have graduations of 0.02mm, with a full turn of the handle being 75 graduations. The Z axis however, has graduations of 0.025mm, with a full turn being 60 graduations... I'm going to ask Santa for a DRO...
@clubberdang3955
9 ай бұрын
You are a very good communicator
@dannyderoye2636
3 жыл бұрын
I like your explanation very carefully. I am learning a lot. It's a shame I can't mill anything at the moment because I'm converting it to CNC. But now I have to make everything through the lathe and mill around the pieces myself. Continue like this I am learning a lot. Greetings from Belgium.
@joecolanjr.8149
4 жыл бұрын
Watching your videos is like machining ASMR!! Sooo relaxing!! Thank you!!
@timinwsac
4 жыл бұрын
With the paper method first put a little oil on the part then stick the paper to it. And you'll find your standard "zig-zag" cigarette paper are .001.
@tdfguy2002
4 жыл бұрын
Really good Quinn! Thanks for another great video
@ADBBuild
4 жыл бұрын
I use your shim method, only with paper and slide the paper back and forth until it catches. You can also use a dowel or endmill shank. Bring the spindle down until whatever dowel or endmill shank you are using won't roll under, then just slowly move the spindle up until it just barely does. You are now the diameter of the pin/shank above your part.
@jmullner
7 ай бұрын
Great video. Thank you.
@amanofmanyparts9120
3 жыл бұрын
Electronic edge finders have come down in price significantly in the last couple of years or so. You can pick them up for a very few beer tokens these days from the usual sources in the Far East. How precisely machined they may be I couldn't say, but I'll find out when I spring for one!
@Touay.
4 жыл бұрын
For the home-gamer and on small parts, a single datum for each direction is great. on larger parts, you will likely get features that need to be precise to each other, rather than to the overall datums. If a part to be mounted onto your part requires precise mounting features, they should have a sub-datum. Create one feature, and measure the others to that feature as a local datum, rather than using the overall part datums for each feature.
@desmofan1864
4 жыл бұрын
DRO? Pah! When I was an apprentice, we had several colors of wax pencils in which to mark the handwheels for backlash and we were better for it! *rabble*rabble*rabble* :D
@steved8038
4 жыл бұрын
How did you do that ? You took a very complex subject and started to unravel its mystery did I understand it all No but I got the basics to try experimenting with a tool grinder and gaining experience .Thank you. now if you could just explain how to split an atom !!
@spankeyfish
4 жыл бұрын
My Sieg mill does everything possible to make it difficult to measure things accurately; the dials are marked in increments of 1/40mm and it's a 2mm leadscrew so, naturally, you have the numbers on the dial going from 0-80...
@richardlincoln8438
4 жыл бұрын
Thanks for sharing, Best Wishes.
@dblbhd
4 жыл бұрын
I love watching your videos because you do not edit them. If you make an error you make it funny, which is awesome. My question is, where do I find a METAL degree scale for a compound. I have a Smithy (not the best) but I haven't hit the Lotto yet. Thanks for your help Bobbo72
@GJCOrado
3 жыл бұрын
Just purchase a lathe and mill to set up a home shop. Your videos helped with the ordering and caused me to cancel the lathe order and go bigger. Working my way through all the videos and would like to know what you are using for audio with your iPhone?. Also your video editor?
@willyhooyberghs8068
4 жыл бұрын
For the last finishing pass, try to use climb cutting. Far better finish on the aluminium part and no burr. I would also appreciate it if there is a mention of the metric measurement system, I can't get a head on the imperial system (let's say I hate it). Some youtubers mention metric dimensions on screen, and I am grateful for it. Thanks for the video!
@davered27
3 жыл бұрын
If you don't like finding the top surface with paper, lick a bit of Rizla paper (any flavour) and stick on the top surface. Lower your quill until the Rizla picks up and you'll be about 12 microns off...
@H2Dwoat
2 жыл бұрын
Hi, not sure if this is a dumb question but do you trust that the diameter of the mill end is correct or should you check? Also, will the mill end diameter change over time due to dulling or wear?
@nbolin7803
4 жыл бұрын
Great video! I wish I could give 2 thumbs up
@MrJTJINX
4 жыл бұрын
How do you decide on your width and depth of cut, on a lighter note - Do you use a different tool to remove brown. black and grizzly burrs
@potatopobobot4231
4 жыл бұрын
MOAR!
@dblbhd
4 жыл бұрын
Another quick question. Is your DRO the Glass or Magnrtic version? Bobbo72
@remstir2226
4 жыл бұрын
Hey Quinn, im kinda of confused, i go to a trade school for machining and i was taught when you use an edge finder and it kicks your suppose to move it back til it sits on the edge but isnt kicked and is not wiggling. Also im sorry, i bad at explaining things.
@harris34567
4 жыл бұрын
You may be correct but there are at least 2 problems, firstly if you move back you have backlash to contend with especially if you are working with dials and second as you move back and the edge finder trues up you will not be certain that you have not overshot because the finder might continue to run true even if you move it right away from the edge. Just my thoughts and experience on it.
@remstir2226
4 жыл бұрын
@@harris34567 okay thank you very much appreciate it.
@Blondihacks
4 жыл бұрын
Yah, once you get consistent with the edge finder, you can correct back a bit to get more precise, but that only works if you’re using the DRO and don’t have to worry about backlash.
@mtwagner
4 жыл бұрын
Will you be doing a video on the pointy end of the edge finder, which I presume is to locate existing holes?
@Blondihacks
4 жыл бұрын
You bet! Quite soon, in fact
@andystansbury8576
4 жыл бұрын
what is the cad system you are using
@x8rsrule
4 жыл бұрын
aluminium likes speed....and alcohol...and so do I!... just not at the same time though...
@tdscwhelan
4 жыл бұрын
9:03 "...or you could use you knee to measure things..." Still new to machining, caught me out by surprise :D
@tdscwhelan
4 жыл бұрын
Hopefully the correct spelling...
@robertoswalt319
4 жыл бұрын
What she was referring to was that on bench top mills like she has the main way for moving the head up and down is to use the wheel that she was just showing to move the head. It is great for large movements but it can be a pain to get the last .001" due to the coarseness of the adjustment. With large mills that sit on the floor, they have both a spindle adjustment as well as the ability to raise or lower the table. The adjustment for raising and lowering the table is called the knee. I hope this helps.
@tdscwhelan
4 жыл бұрын
@@robertoswalt319 it does help. Thanks for the response :)
@Blondihacks
4 жыл бұрын
Apologies for the confusion there- I covered mill geometries in an earlier video in this series. It’s hard not to assume everyone watches all the videos. 😁
@Stefan_Van_pellicom
4 жыл бұрын
At 23:06 you bring in your cutter again after you used the edge finder. How did you get it at exactly the same stickout as before ?
@Blondihacks
4 жыл бұрын
I didn’t- those are shot out of sequence. 😁 Sometimes I have to bend time to teach something more effectively.
@Stefan_Van_pellicom
4 жыл бұрын
Ah, okay, I was afraid I missed something ... 👍
@EngineersWorkshop
4 жыл бұрын
Ever been to a Zed Zed Top concert?
@Rprecision
4 жыл бұрын
I ment to ask before, what did you make the cover for your DRO out of?
@xenonram
4 жыл бұрын
They come with a cover or you can buy one.
@xenonram
4 жыл бұрын
Assuming you're talking about the transparent plastic and not the black shade. I'm sure you're smart enough to figure out something to make a shade out of, if that's the cover you're talking about.
@Blondihacks
4 жыл бұрын
The plastic cover came with it. The glare shield is a Cheerios box cut apart, folded into shape, and painted black. 😁 If you need a protective shield, Saran Wrap also works very well. I put that on my iPad in the shop so I can look things up with dirty hands.
@Rprecision
4 жыл бұрын
@@Blondihacks Thanks
@johnapel2856
4 жыл бұрын
Another good basics video. In precision measuring, how much smaller is a cat's breath than a dog's breath? Is it stupid to use non standard measurements such as a wombat's toe or a metric banana skin? Yes, I know, shut up John. Thanks!
@Blondihacks
4 жыл бұрын
Cat’s breath is the same size, but they will tell you it’s a lot more important.
@johnapel2856
4 жыл бұрын
@@Blondihacks Ha!! Meow Sprocket!
@davesalzer3220
4 жыл бұрын
Cat treats. Lol
@armick57
4 жыл бұрын
Looks like Clickspring's scribe...
@Blondihacks
4 жыл бұрын
Yup! I made it from his video.😁
@jimsvideos7201
4 жыл бұрын
Also, regarding expensive edge finding, John Saunders has a video on the adventures you can have with a Haimer and some replacement probes. (kzitem.info/news/bejne/y2aDq5OVbISoioY)
@TylerHicksWright
4 жыл бұрын
Translucent stock that shows the part within? What is this, Clickspring?!
@Captain_Flyn95
4 жыл бұрын
No, it's This Old Tony
@hairyfro
4 жыл бұрын
Expected to hear the radio dialing-in sound...
@mtwagner
4 жыл бұрын
Someone has to be Clickspring during his hiatus.
@billbrennan8405
4 жыл бұрын
Quinn - Another great video . I am a toolmaker back from the stone age like1970, we had no DRO’s on any of the machines even in the die shops. One other touch method I used was to put a view layers of layout blue on the part with cutter running engage till is saw the bluing layer be cut by the milling cutter. For a hobby shop machine operator you are very highly skilled. Appreciate your excellent video content. Bill B
@lukeaugustini7866
4 жыл бұрын
As someone who is waiting on delivery of their first milling machine your video series is a huge help. Very informative and easy to comprehend. Thanks!
@xfire301
4 жыл бұрын
I’d pick an origin point that wasn’t milled away in case I needed to restart the part.
@Blondihacks
4 жыл бұрын
Yah, that’s always a good idea
@nathanielstephenson7932
4 жыл бұрын
It wasn't milled away. That point is only a reference and does not need to exist inside or on the corner of the part at all. In all three location steps the surfaces used still exist after cutting and may be used again in the same manner to locate the same point in space. I have had to indicate features to set PRZs (WPCs for the Mazak peeps!) that were beyond the mill's travel. The origin was a real location but I couldn't put a hole there unless I used a cordless drill, and there might not have been any material there anyways (i.e. a ring shaped flange referenced from the center).
@GregorShapiro
4 жыл бұрын
@@nathanielstephenson7932 PRZ? WPC (wood plastic composite)?? World Position Coordinates (that was my *unsupported* guess).
@nathanielstephenson7932
4 жыл бұрын
@@GregorShapiro Part Reference Zero and Work Piece Coordinates.
@xfire301
4 жыл бұрын
Nathaniel Stephenson I’m sticking with Blondihacks.
@garyhall2126
4 жыл бұрын
Quinn, I really love the way you teach! I've been around machine shops for 60 years or so and I catch new stuff from you every so often. We use your videos in the high school shop where I volunteer. Great stuff!
@Blondihacks
4 жыл бұрын
Awesome, thank you! I appreciate the heck out of that. ☺️
@robertoswalt319
4 жыл бұрын
@@BrilliantDesignOnline Maybe she needs to speak into a can or cardboard tube to get that effect?
@rhocass
4 жыл бұрын
love it! I was just gifted/foisted a Taig CNC mill and I want to add electronic handwheels to work on my mill skills. This is high on my list when I get it all together~~
@OldtimeIronman
4 жыл бұрын
wait wait wait how the hell do you show your numbers/drwg superimposed on the part in the vise like that, that is one cool trick that all the youtube machinists should have!
@scottr939
4 жыл бұрын
This Old Tony does a lot of superimposing of all kinds in his videos. He's very good at it, and sometimes they are very funny. It's all just fancy software ;-)
@jimsvideos7201
4 жыл бұрын
Transparency and perspective warp in either Photoshop or Illustrator (graphics software), overlay that in Premiere Pro (video editing software).
@perchowski3021
4 жыл бұрын
Could also do it on cellphone. Record or take screensshot of dimensions you want overlayed, use kinemaster or similar app and make dimension a overlay 50% transparent photo and just position it how you want. I do something similar for riding to help see body position. I have a few old videos I posted, but use 2 gopros. 1 behind me and 1 mounted in front. The camera in the rear I make 60% transparent and overlay on front video. Best way I've found to see your own body position..
@rickpalechuk4411
4 жыл бұрын
The DRO can do a lot of things... but can it make a refreshing Tom Collins? Thanks for sharing Quinn, Cheers
@Blondihacks
4 жыл бұрын
I keep looking for the Manhattan button, but haven’t found it yet. 🤔
@nathanielstephenson7932
4 жыл бұрын
@@Blondihacks I haven't found a button for those either but I've been known to hang out on the couch with a bottle of bourbon and a jar of cherries. Virtually the same effect. #NateHacks
@Steve_1401
4 жыл бұрын
Regarding using paper to find an edge - I've seen old guys in the shop rip off a square of cigarette paper, lick it, and stick it to the job. Once the cutter touches the paper it flicks it away from the job and you've found your edge/surface. (Red paper is assumed to be .005", blue is .003")
@ShawnDickens
4 жыл бұрын
Grab a known, like a 1" gauge block and raise your tool until it slides under and you will never bust an edge. Even in a huge CNC where you have no feel of the very powerful z feed.
@pieyed1302
4 жыл бұрын
Receiving my new mini-mill for Little Machine Shop tomorrow!! I've had a Micro-Mark mini-lathe for about 15 years and made a lot of stuff. Mostly parts for R/C airplanes. I have been enthusiastically watching your Vertical Mill Series. What a wealth of information !! Thanks for taking the time to produce all thos videos (and yes, I'll show my enthusiasm via Patreon). While verifying I spelled 'Patreon' correctly, I just went ahead and became one of your newest Rockstar! I've been "milling" using the milling adapter that I bought with my mini-lathe recently FOR THE FIRST TIME! After 15 years, I'm guessing they won't give me a refund on that piece of crap. Oh well, that was back when I was rich and $300 was easy to spend. I do have one question (you knew I did, huh). The item i'm making is from a 6" piece of 3/4" aluminum. I need to put a 1/4" wide by 1/4" deep groove down the length of the rod. My new mill will have a 3" vise with it. How do I securely hold that rod? Do I need a set of jaws with a V-groove? I haven't seen that addressed in the 7 mill videos (or did I miss something?) I also noticed that I have asked 3 questions, but I'm sure you knew that was going to happen, too. Thanks again for your entertaining and informative videos! Tom P.
@Blondihacks
4 жыл бұрын
Woohoo! Thanks so much for the Patreon support! Regarding the rod, the way I would probably fixture that is a sideways v-block in the vise. That will give it three points of contact and a secure hold. Then support the ends with machinist jacks, because the vise is so much narrower than the stock. See my video on machinist jacks for examples of how to use these. Another way to do that is to remove your vise and simply lay the bar in a t-slot right on the table and clamp it down. This is a common trick for long round stock. It means you have to work around your clamps, either make your stock extra long and clamp the ends, or use three clamps and shuffle them as you go, leap frogging around the cutter. It all depends what fixturing hardware you have access to. I’m sure there are other ways as well. There are as many fixturing methods for any part as there are machinists.
@leebarnhart831
4 жыл бұрын
That paper method always scared me too! Never took to it. I’ve seen machinists use a piece of paper a fourth the length of paper you used. I always stopped whatever I was doing when I witenessed that to see what was going to happen. Standing back of course so as to not to get sprayed with blood and finger parts. Got to watch yourself!
@AmateurRedneckWorkshop
4 жыл бұрын
Great mill lesson. Nothing improves the accuracy of an amateur machinist like a DRO.
@biggles5633
2 жыл бұрын
I've just discovered your videos. What marvellous content along with a brilliant style of teaching ... a joy to watch and certainly an inspiration for someone who has been wanting to start the journey of metalworking as an extension of furniture making. Well done!
@brianmoore1164
4 жыл бұрын
Fantastic video and your editing technique to overlay the part drawing on the stock is super cool! Sometime when you get around to it, I would love to hear your take on tramming our style of mill. Shims under the flat column to base mating surface is far from perfect. I get so jealous when I see the Bridgeport videos and they start talking about just loosen this screw, tap into tram and tighten it back up.
@ProfRonconi
4 жыл бұрын
Amazing video. I knew all that already, but it took me a long time to figure it out by deduction. Other machinists just take it for granted that you are.. well, a machinist, and don't bother to explain the "obvious" (for them) stuff. If your videos had been online before, they would've saved me a lot of time and heartache.
@mtwagner
4 жыл бұрын
Two Things: First, today I learned the $3000-ish way to give myself a hella-paper cut, thanks. Second: when you’re adjusting for the ½ diameter of the edge finder, and go too far past, should one double back and do it again to account for backlash? Never mind, finally finished watching.
@xenonram
4 жыл бұрын
She mentioned that within the first 3 minutes.
@mtwagner
4 жыл бұрын
Andrew Delashaw hence the “nevermind”
@Debtfreehomesteaders
4 жыл бұрын
Great lesson. I love the measurement overlay in the video. Great job! -Will
@bostedtap8399
4 жыл бұрын
Excellent explanation of 3D co-ordinates, great introduction those new to CNC milling, and correct drawing standards. Yes, there are many tricks to determining cutter distance to the part, even a Sharpie mark has thickness?. Lathe DRO is not necessary, unless you have several repeat operations, and can store tools with offsets. Great vlog, excellent drawing overlay on the video, cool 🤗. Regards John Quinn.
@blacklion79
4 жыл бұрын
I've expected TOT reference when you talk about DRO on lathe :-)
@danielworthy4943
4 жыл бұрын
After watching a couple videos for the first time from your channel within in 2 hours had to sign up as a patron member. One of the best channels on machining I have ever seen. Clear and concise with fun as well! Thank you and keep it going!
@qcnck2776
4 жыл бұрын
Quinn, really nice video. How about making one on the tips and tricks of a DRO on the mill, e.g. bolt hole circles, etc
@Blondihacks
4 жыл бұрын
You bet- I will definitely be doing a video on DROs.
@gregfeneis609
4 жыл бұрын
3:15 Absolutely clear, or incrementally clear, depending on settings
@lindsayweitzel1467
4 ай бұрын
I have a very dumb question, I apologize... are you starting off with a 1"x 2"x 0.5" block?
@jawadibrahim2367
4 жыл бұрын
I feel like hand wheels are great for keeping the brain healthy and smooth running.
@Larry1942Will
4 жыл бұрын
I have a ,very, used mill so my DRO is more accurate than the handwheels and a lot quicker to use. One note of caution about DROs. They need to be calibrated after you install them. That means you need some sort of very accurate way of measuring reasonably long distances. Multiple iterations are required. Also the 0.0001 readings on most DROs are optimistic estimates. Of course if you need 0.0001 accuracy you better have a surface grinder. I really like all the features of the DRO. For those of you that have never used one, you can read the instruction manuals on-line to get a better understanding of why they are nearly standard equipment on most machines. Thanks for the video.
@jawadibrahim2367
4 жыл бұрын
@@Larry1942Will DROs are nice and all, and yeah I understand that a clapped out mill will probably have janky handwheels, but in the case of having a functional and reasonable set of handwheels then I believe using them may be a fun exercise for the brain, not necessarily quicker or more practical.
@TomMakeHere
4 жыл бұрын
I've always seen the paper touch off with a stationary cutter. Common with the router community All well explained
@Blondihacks
4 жыл бұрын
For sure- you can also use paper like you would a feeler gage. It’s less precise that way though, because paper compresses easily
@marcusdaviso
4 жыл бұрын
Back when I was machining 30 years ago we all use to keep a packet of cigarette papers in our tool boxes for touching off. moisten part and the paper would stick. Oh and this was in the U.K. so some of the machines were old imperial ones and some metric. Kept us on our toes and yes, mistakes were often made especially on the lathes when setting up for thread cutting.
@Roblecop
3 жыл бұрын
I'm a Mechanical Designer by trade and I make a lot of prints lol. Typically your dimensions are measured to your primary datums. Great vid Quinn! I absolutely love your channel. I'm going to get into some hobby machining so I can make my own prototypes for my hair-brained ideas for stuff and im watching all your tutorials for my starting point
@cliveclapham6451
4 жыл бұрын
Clear as mud 🤣🤣🤣 I defo need a DRO for my hacksaw👍👍👍
@gordon6029
4 жыл бұрын
Thanks for these videos. I love learning. Promise as soon as I have a few bucks ahead of the bills I’ll grab a coffee cup or something off your web store.
@christophercullen1236
4 жыл бұрын
Dear Quinn Thank you for the help with the oil can have ordered one from Amazon. Christopher from Down Under
@laptopdragon
3 жыл бұрын
@ 7:10 (ish) on finding zero. What about releasing the grip on the end mill bit so it (gently) drops and rests ontop of the object, lower the spindle (with relaxed/open collet) around the end mill, so only the weight of the end mill bit is resting on the surface, then tightening the spindle/collet in place? Or use feeler gauges on top of the object to fill in the gap, deduct the different to zero with no-touch....edit::: ah, you got this covered. great channel btw, you're excellent with audio, composition, and dare I say humor.
@markdechant8264
4 жыл бұрын
Quinn you are an excellent teacher. Your explanations are always very clear and spot on.
@chrisdavies7761
4 жыл бұрын
More valuable stuff learnt from Quinn............thanks 😃
@rayfalcone6897
4 жыл бұрын
Hi Quinn,nice video,thanks for sharing.
@FedericoCarocci
2 жыл бұрын
Thanks! I'm learning a lot from you
@randynovick7972
4 жыл бұрын
Nice. Always a pleasure to learn new things. Thanks!
@tomnorton8218
3 жыл бұрын
Bear with me I am a woodworker! Your demo using the edge finder. It appears that it doesn't match the cutter diameter.
@AMRosa10
3 жыл бұрын
1:20 is missing the between frequency interference while tuning a radio noise.
@clydedecker765
4 жыл бұрын
Very thorough and cat treats undamaged...
@turiddu9
Жыл бұрын
20:40 God love ya!!!
@tomnorton8218
3 жыл бұрын
Woops! I didn't watch long enough!
@hamps856
4 жыл бұрын
well done presentation..Good job
@EricMBlog
4 жыл бұрын
You lose the z-ref every time you change your tool, right? Like you found your z with the tool, then edge found, then went back to the tool and continued on, but wouldn't you have to touch off (or whatever method) the top again? Maybe I'm missing something, but I didnt think the tooling was repeatable in the Z unless you are using particular fixtures.
@Blondihacks
4 жыл бұрын
You are quite right. You need to re-establish Z every time you change tools. There are some tool changing systems that are repeatable in Z, but plain old collets like this are not.
@tylerkrug7719
4 жыл бұрын
You are awesome!
@mpetersen6
3 жыл бұрын
Blinkin' lights Theres an old joke about that originally a gag plaque for Porsche dashboards It goes something like this Acting! Das machine ist night für gewreken by der dumkoff und hammerkoffen. Öperatezen by der dumkoff und hammerkoffen kanst kausen spitensparken und crashundbang! Zu, keepen der handz in der pockets und watchen das blinken lightz
@TreeTechLLC
4 жыл бұрын
Can you send me email and give me a hand....
@Epiphalactic
3 жыл бұрын
Love your channel.
@donmittlestaedt1117
4 жыл бұрын
Thanks Quinn
@jimsvideos7201
4 жыл бұрын
Cat treats xD You suppose Sprocket would feel challenged if he thought he wasn't the anly murder machine in your life?
@Blondihacks
4 жыл бұрын
She knows she’s the only murder machine that can get me in my sleep, though. There’s power in that.
@jimsvideos7201
4 жыл бұрын
@@Blondihacks So that's why they don't mind when you come home smelling like another cat o.0
@antoineah3045
3 жыл бұрын
13:53 what rpm ?
@larryshaw6517
4 жыл бұрын
Well done I like the in-depth explanation, although I also like the crazy stuff too sorta like the cat toothbrush. Thanks
Пікірлер: 195