#Making a vest
I share how to make it well without getting tangled.
We made it as simple as possible so that you can wear it on both sides and draw patterns easily. (Still, it's a good fit. Please refer to the outfit shot~ ^^)
#Making Coco Genie's clothes #Double-sided vest
1. Drawing patterns
- Prepare two sheets of nonwoven fabric 28.5 by 63 cm and draw them like a picture.
- Adjust the arms or length by referring to my picture.
2. Cutting
- Give 1 seamstress and cut it off.
- Two for the front and one for the back
3. Attach Pockets
- You can skip it.
- 12*12 Put two sheets together, flip them over and stick them on the front panel.
- The location is where you feel comfortable
4. Sticking the shoulder line
- Sew the front and back shoulder lines of the lining and exterior, respectively.
- You know how you put the surface facing each other?
- Iron it with a brush.
5. Connecting the lining to the exterior
- Spread it out
- After facing each other,
- Sew with the dotted line below.
- And then flip it over.
- Check out the video on how to flip it nicely
6. Side line connection
- The sides are sewn together with the lining and the outside.
In the fifth process, the lining and the exterior were faced together, but now, the point of making a vest is to put two sheets of lining and two sheets are to make a vest.
- Flip it over.
- Now the shape of the vest comes out. So cute.
7. Sewing the hem
- Sew the bottom of the vest facing the lining.
- You have to hit it from the inside (so that the outside faces each other)
- Leave the window hole.
8. Wrap it up
- Turn it upside down and iron it.
- You can hit the ball or block the window hole while sinking.
(You don't have to do the edge table or not. It's better not to do it if it wasn't perfect sewing)
- If you pierce the button hole and attach the button,
- The end!
Make it pretty, and don't forget to subscribe and like.
Thank you.
Негізгі бет Тәжірибелік нұсқаулар және стиль Vest making / Free pattern / Clothes making / Double-sided vest
Пікірлер: 37