Buy your Sherman-S on Ewheels and support the channel ! www.ewheels.com/?affiliates=725
@mangu768
Жыл бұрын
I tried this process three weeks ago same tire... I ended up exhausted with a puncture tube... Realized that the stock tire is not as bad as what people say and have learned to enjoy it. great video love all the detail.
@MathieuTechMoto
Жыл бұрын
Thank you, patience and taking time is key, stock tire is not so bad but i really want to try the Michelin, and it seems that i'll be able to even make it tubeless by looking at the rim bead
@mangu768
Жыл бұрын
@@MathieuTechMoto Patience for sure. Think i smoked a pack through the whole process lol. Going tubeless would make tire changes so much easier. I can not wait to see what the process is like i may just try it out myself..
@MathieuTechMoto
Жыл бұрын
@@mangu768 Be sure to subscribe, just received the tubeless valves so there will be a video this week
@pacochawa2746
Жыл бұрын
@@mangu768 Im not sure about that...
@WILSONsHobbies
Жыл бұрын
LOL MANGU i am feeling how you are lol i punctured my tube too, and i use shino and i couldnt get the tire over the rim. i had feeling i punctured, so i took tire off and yes i puncture. waiting on tubes and have sherman s torn apart just sitting there....sad face
@Andrew.Chiu.360
Жыл бұрын
Fantastic filming and instructions, thank you for this valuable demonstration. Just finished mine thanks to your help.
@MathieuTechMoto
Жыл бұрын
Thank you, i appreciate the feedback :)
@Andrew.Chiu.360
Жыл бұрын
@@MathieuTechMoto Side note, I believe when disconnecting the battery terminals, negative (black) should be pulled first then positive (red). When reconnecting the battery terminals, positive (red) should be connected first, then negative (black).
@MathieuTechMoto
Жыл бұрын
@@Andrew.Chiu.360 Thank you for the information !
@kingdongo4388
Жыл бұрын
The best quality disassemble/assemble video I've seen on YT good job mate!! :)
@MathieuTechMoto
Жыл бұрын
Thank you :)
@AlinTomoroga
Жыл бұрын
Nice video showing steps, quiet but informational.. thank you for showing us the insides .. I have one on order, so soon I’ll get to ride not just look at others videos :)
@MathieuTechMoto
Жыл бұрын
Thanks, glad you liked my video, will do more like these then :)
@CaptainCandycorn
Жыл бұрын
I just converted my sherman S to tubeless using the stock tire and its fantastic. Highly recommend.
@MathieuTechMoto
Жыл бұрын
Great, thank you for sharing
@scottbones
Жыл бұрын
Dope. Thanks for taking the time.
@MathieuTechMoto
Жыл бұрын
You're welcome !
@PB2001PB
Жыл бұрын
Any thoughts on the difference between Michelin PS and Michelin city pro tire?
@MathieuTechMoto
Жыл бұрын
Hi, i only have experience with the Pilot street and the Pirelli angel 80 80-14, i think i like the lower profile of the Pirelli better, by the way they are all very good tires you can't go wrong
@PB2001PB
Жыл бұрын
@@MathieuTechMoto Thanks a lot!
@milordas
Жыл бұрын
at least tire is installed in correct direction. Imo tire threads arrow should point down arrow, as it should suck water from middle to outer side, not vice versa. Not sure what Michelin was smoking there but imo direction arrow is wrong
@MathieuTechMoto
Жыл бұрын
The problem is that there's two arrows on the tire, one if installed as front tire, and another if used as a rear tire, this could not be more confusing for an Unicycle lol
@milordas
Жыл бұрын
@@MathieuTechMoto as we have ONE wheel you should point to rear wheel, as on motorbike its the one who should have best grip with surface. Front thread on motorbike is reversed to reduce vibrations, as internet info says
@MathieuTechMoto
Жыл бұрын
@@milordas Thank you
@gritred5500
Жыл бұрын
No bolt lock like blue to lock in the screws? LokTite??
@MathieuTechMoto
Жыл бұрын
I like risks :D Just kidding the reassembly is in reverse of course i didnt put locktite lol
@peterchua9952
3 ай бұрын
Will the Michelin Pilot Street 2 - 80/90 R14 also fit on the Veteran Lynx ? or would you suggest going wider for the 90/90 R14 size if this size fits that is?
@MathieuTechMoto
3 ай бұрын
I don't know about 90/90 but 80/90 should be safe
@peterchua9952
3 ай бұрын
@@MathieuTechMoto Thank you so much !
@MathieuTechMoto
3 ай бұрын
@@peterchua9952 You're welcome
@pacochawa2746
Жыл бұрын
Nice work. So is tire change easier on this wheel than sherman patton? This looks doable yet not too easy. Sherman patton looks killer but tire change sounds more complicated than this model.
@MathieuTechMoto
Жыл бұрын
I don't have the Patton and don't think i will for the moment, but i can say that the Sherman-S is a lot easier than the Max
@BigORider
2 ай бұрын
So is 80/90 just as wide as 90/90 just not as tall of a tire or what?
@MathieuTechMoto
2 ай бұрын
90/90 is wider, 80/90 means 80% of the height of the sidewall which is 90mm so 90mm x 0.8 is the width
@anubous
Жыл бұрын
How long did it take you to do the whole thing?
@MathieuTechMoto
Жыл бұрын
1 hours disassembly, 1 hour assembly
@arnaudd.4016
Жыл бұрын
Salut, super tes vidéos ! Tu as des conseils pour arriver à remettre le pneu sur la jante ? Je galère avec mes gros démonte pneu 😅
@MathieuTechMoto
Жыл бұрын
Oui assure toi que la bead du côté opposé à tes barres est bien dans le creux de la jante, autrement ce sera beaucoup trop serré
@arnaudd.4016
Жыл бұрын
@@MathieuTechMoto merci pour l'astuce
@arnaudd.4016
Жыл бұрын
@@MathieuTechMoto super merci c'est passé !
@MathieuTechMoto
Жыл бұрын
@@arnaudd.4016 Oh yeah félicitation !
@manya1369
Ай бұрын
Why not tubeless tyre? 🤔
@MathieuTechMoto
Ай бұрын
@@manya1369 its tubeless since 2 years now
@manya1369
Ай бұрын
@@MathieuTechMoto 👍
@RRfromtheNorth
Жыл бұрын
what did you spray on the tire at 6:06?
@MathieuTechMoto
Жыл бұрын
A mix of oil/soapy water similar to Armor All but it will dry instead
Пікірлер: 51