@saucebarber5528 I have using the TPOB SLIME 2. It’s like a 30 minute video kzitem.info/news/bejne/2auHnYWbpGp7dIosi=tkx_AzPOMkSReqtV
@yvngpierre1063
2 жыл бұрын
Can you put the link in the Description please Edit: watch the end of the video and you said eBay
@dc_crush
2 жыл бұрын
Yessir I’ll make a video of how to install the blade if you need one.
@josiahking3632
Жыл бұрын
Are you ever gonna show the blade swap process for this ?
@dc_crush
Жыл бұрын
Yes I’m getting two new machines so I can show the blade swap for the Andis GTX blade as well as the Babyliss FX Blade🔥😮💨 waiting for them to come in the mail
@josiahking3632
Жыл бұрын
@@dc_crush ok thanks 👍🏼👍🏼👍🏼
@SilverbackReviews
Жыл бұрын
The andis GTX blades vs GTX exo. Is the olny difference silver vs Gold?
@dc_crush
Жыл бұрын
Yes only difference is the color.
@tmoney9127
Жыл бұрын
Just got the bestbomb version all gold 😊
@dc_crush
Жыл бұрын
Put the Andis blade on this thing I promise it’s night and day 🔥🔥🔥
@tmoney9127
Жыл бұрын
@@dc_crush most definitely will just have to order it looking now 🫡🫡🫡
@charlesmills2657
6 ай бұрын
How u left a huge line without blending it out
@dc_crush
6 ай бұрын
🫣
@scryptic3233
Жыл бұрын
Have you tried the aliexpress replacement blade for andis gtx?
@dc_crush
Жыл бұрын
No I haven’t What’s the difference or can you send me the link here
@TruHussle369
Жыл бұрын
Could u do a vid of how to swap out the blade
@dc_crush
Жыл бұрын
Yeah o gotchu but I’ll have to put the stock blade back on lol
@massterrbarber
Жыл бұрын
Traaaaaaaaashhhh
@illianedilenko851
Жыл бұрын
Can you do a tutorial on how to zero gap them?
@dc_crush
Жыл бұрын
Yes I will!
@illianedilenko851
Жыл бұрын
@@dc_crush Thank you!
@scryptic3233
Жыл бұрын
Do you need a mod?
@dc_crush
Жыл бұрын
All that you need is the Andis GTX BLADE and its just as simple as swapping the blade.
@scryptic3233
Жыл бұрын
@@dc_crush so no mod? because i have seen other creators claiming you need to buy extra pieces to fit the blade
@dc_crush
Жыл бұрын
@@scryptic3233 idk what they talking about I legit only got the blade and swapped it over. Idk what they’re talking about unless they’re trying to sell something but no mod is needed
@scryptic3233
Жыл бұрын
@@dc_crush ok thanks
@cjlang5036
Жыл бұрын
I have these trimmers but a different name Audoc and you need to mod them to zero gap them.
@justinseepersaud1339
Жыл бұрын
I had trouble getting the bolts loose bro, any advice?
@dc_crush
Жыл бұрын
Use a better screw driver 🤷🏾♂️
@freddybautista6412
Жыл бұрын
Did u figure it out? I ended up using an impact drill. Looked for the right bit. And used my compact impact drill. Easy peasy
@dc_crush
Жыл бұрын
Damn you had to use and impact 😂😂😂😂 sheeeeeesh
@cjlang5036
Жыл бұрын
Can you do a blade swap so we can see up close what the zero gap process looks like?
@dc_crush
Жыл бұрын
Sure thing. However I don’t think I have the original blade still. Stay on the lookout if I can find it then I’ll do that for sure. I do recall it was a pain to swap it over
@Pathfinder-Sarawak
Жыл бұрын
I would not recommend VGR , after only 8 weeks of ownership, they will not honour their warranty, and their customer is terrible they are rude and insulting
@dc_crush
Жыл бұрын
You get what you pay for I guess but I got mine off Amazon so idk where you bought yours at bro lol. YOU MIGHT want to change who you purchase products from 😂😂😂 I mainly rock with Amazon
@Pathfinder-Sarawak
Жыл бұрын
@@dc_crush I bought directly from VGR’s own store
@dc_crush
Жыл бұрын
@@Pathfinder-Sarawak I only do that with STYLECRAFT and Gamma when they have preorder drops on exclusive machines. Other than that I’m on Amazon & EBay lol
Пікірлер: 40