I get my kit today 🥰. Perfect timing on the video.🤜🏽🤛🏽
@TIRADORACING
4 жыл бұрын
Awesome! This is only part 1, I talk about having to trim it to fit my 2009, idk what year car you have so just keep in mind you might have or might not have the fitment issues I had.
@Riveraharry75
4 жыл бұрын
TIRADO RACING I have a 2015 r/t that a recently procharged. This widebody is the most anticipated upgrade. Hopefully it goes well. Thank you for the time you put in your videos. 👍🏽
@TIRADORACING
4 жыл бұрын
@@Riveraharry75 I think i found you on instagram, I sent a DM, if you questions or want to see it up close i can send pics and videos. Im playing catch-up on video edits and posts, but the kit is painted and on the car lol you can peep it on my insta as well!
@Riveraharry75
4 жыл бұрын
TIRADO RACING sounds good!!
@6dreams79
4 жыл бұрын
@prochargedmopar15 when you finish installing your kit please post pics or videos I’m looking to buy and explain the process..I have a 2015 HC and really wanna know if it fits well without modding much
@carstuff4u942
4 жыл бұрын
I’m 100% into women, but this guy needs to be a model!
@TIRADORACING
4 жыл бұрын
Haha thank you!
@leethalmodz313
4 жыл бұрын
Just found this channel ✊👊 keep the challenger videos coming.
@TIRADORACING
4 жыл бұрын
Thank you so much ! I will! 🤘🏽
@ambassador_fleet
4 жыл бұрын
Great stuff, man! Can't wait to see the end result
@TIRADORACING
4 жыл бұрын
Thank you! I’ve posted a picture on Instagram if you wanna check it out!
@dalemeyer5363
4 жыл бұрын
Great vid. Good to know what works and what is needed to get it to fit.
@TIRADORACING
4 жыл бұрын
Yeap! I did some trimming for it to fit which I’ll show in my next video.
@MexicanPizzaYummy
4 жыл бұрын
Of course it will! It’s the same body
@TIRADORACING
4 жыл бұрын
Lol, you would be surprised it’s not common knowledge! 🤯
@jawlowvette210
4 жыл бұрын
Awesome 👍 thanks for the install video 😊
@mango3ninety2
3 жыл бұрын
Looks great! I did the Vicrez Widebody on my Challenger!
@mango3ninety2
3 жыл бұрын
Thanks for the help!
@TIRADORACING
3 жыл бұрын
Yessir! Yours looks great!
@philmerritt8643
2 ай бұрын
Where did you get the parts from it so hard to find that front bumper kit all together like that.
@TIRADORACING
2 ай бұрын
In this video vicrez. The oem kit in my later videos were sponsored.
@JohnnyXR7
4 жыл бұрын
Great vid!!
@TIRADORACING
4 жыл бұрын
Thank you!
@SouthCrownCustoms
4 жыл бұрын
Right on man!
@shahrukhkhan-vr7mf
2 жыл бұрын
Hey very helpful video. Just one question because I want to do this for my 2013 392. To upgrade lights would I be looking for lights of a 2013 model or 2015 onwards as fitting might be different after this install?
@TIRADORACING
2 жыл бұрын
You need 2015+ headlamps. Do NOT BUY 2015 “styled” headlights for your 2013. They absolutely need to be for a 2015 car. Secondly you need an adaptive harness for them to work on your pre 2015 model.
@welcometomychannelswelcome7261
4 жыл бұрын
I have seen after parts are never going to fit correctly even 2015 and up. although through 2015 up has a clean lines. interior is different between 2008 and 2015
@TIRADORACING
4 жыл бұрын
Slightly misleading comment especially when myself and many others have installed the kit. I will be the first to admit other people have installed it better than I did. It is not impossible it just takes a little patience and work. Yes the interiors are different but the body kit has nothing to do with the interior, or should I say, the interior design does not affect how the flares sit on the car....
@superuser87
4 жыл бұрын
Nice job man
@TIRADORACING
4 жыл бұрын
Thank you!
@lilianalizeth7934
2 жыл бұрын
Where can I get those push tabs for the new bumper I have a 09 RT doing the same thing as you bro
@TIRADORACING
2 жыл бұрын
Mopar parts online. Or the dealership.
@jorgelucero9829
4 жыл бұрын
so when you installed the demon bumper on part 2, you didn’t need the parts that you took off at 7:38 along with the other parts you took off?
@TIRADORACING
4 жыл бұрын
Yes sir, I threw them away. Whatever I took off to make it fit is gone. Now let me be clear I primarily use this car for racing, some of the parts I took off are important in the event of a collision. I’m In no way saying take it off I’m simply showing what it takes to make it fit.
@erickdaone3147
2 жыл бұрын
We got the same last name bro
@TIRADORACING
2 жыл бұрын
Ayeeeee represent 😎
@variantplatinum1459
3 жыл бұрын
What is the name of the bracket that slides into the fenders
@TIRADORACING
3 жыл бұрын
I have no idea. I don’t think there is a formal name for it… I could be wrong tho.
@dirtybirdvision
3 жыл бұрын
I have the vland 15+ conversion lights. Any idea if they would work with these
@TIRADORACING
3 жыл бұрын
No clue brother. If their conversion headlights and are still the same size then no. I think those headlights just “look” like 15+ headlights that fit in 14 and below bumpers so no they won’t work. You’ll need actual 15+ headlamps that are smaller
@matthewbarraza4279
Жыл бұрын
Appreciate the video but why did. you leave the splitter support rods?
@TIRADORACING
Жыл бұрын
Because the they are a bitch to remove. And the car to this day still runs a chassis mounted splitter.
@matthewbarraza4279
Жыл бұрын
@@TIRADORACING I get you, great job with the car love the way it came out
@ingobernablessinmiedo5715
Жыл бұрын
How did you get the old side marker lights connected?
@TIRADORACING
Жыл бұрын
The old side marker lights don’t fit the widebody. I used widebody side markers. A 15+ side marker harness. Spliced that into my old harness and it worked. It’s in a KZitem video here somewhere I show exactly how to do it and what part number to buy. I think the video is titled “wiring sidemarkers” or something like that
@jimwhit1637
4 жыл бұрын
Did you end up cutting your fenders to allow your tires to travel inside the fender flares?
@TIRADORACING
4 жыл бұрын
Hey Jim, Yes I cut both the front and the rear and matched the cuts on the flares as well. My car is lowered on bc racing coil overs and now I’m running oem demon wheels on 315/40 tires all the way around.
@jimwhit1637
4 жыл бұрын
TIRADO RACING man your car looks great and I won’t to do something similar to my challenger. Since you cut the fender and the flare how did you attach he flare to the car?
@carlosbobadillatapia
3 жыл бұрын
Hey bro did you end up using the middle bumper support? Im asking because i don't have it and i need to buy it. Thanks.
@TIRADORACING
3 жыл бұрын
Are you talking about The black plastic piece and foam?
@carlosbobadillatapia
3 жыл бұрын
@@TIRADORACING minute 8:11 of the video.
@TIRADORACING
3 жыл бұрын
Yea I did put it back in. The problem wasn’t that upper bracket it was the grill hitting the headlights. In my second video installing the bumper I show everything I did to make it fit. Trimming and cutting.
@lilianalizeth7934
2 жыл бұрын
Where can I get those push tabs for the hell cat bumper bro I’m doing the same conversion as u on my 09 RT.
@jeffro2488
7 ай бұрын
The two small curved pieces in the kit. Where do they go?? I can not fivure this out to save my life lol. Please help man
@TIRADORACING
7 ай бұрын
Dang this is easier on Instagram - @tiradoracing dm me and I can send videos back n forth
@davidplummer7146
3 жыл бұрын
how much did it cost to paint the bumper???
@TIRADORACING
3 жыл бұрын
I’m not sure, my paint was sponsored by a local shop.
@jesseyramirez4197
4 жыл бұрын
So I recently got the same bumber put on my 2012 challenger srt8 and I need the side marks by chance do u know where I can find them?
@TIRADORACING
4 жыл бұрын
I have no idea to be honest. You can check at your local dealership or online. Mine came with the widebody kit.
@jesseyramirez4197
4 жыл бұрын
I see thank you tho!
@TIRADORACING
4 жыл бұрын
www.carparts.com/details/Dodge/Challenger/Replacement/Side_Marker/2015/SRT_Hellcat/REPD104504.html?TID=gglpla&origin=pla&gclsrc=aw.ds&&gclid=EAIaIQobChMIveLa5o_X6QIVTvDACh3UFABLEAQYASABEgIYBPD_BwE There you go fam just make sure to get a driver side and a passenger side one.
@davidlockemusic
2 жыл бұрын
Hey man, did you ever put the piece at the 8:09 minute mark back on, or did you just leave it off? Got my bumper coming in tomorrow and wondering if I need to take that part off.
@TIRADORACING
2 жыл бұрын
Yea I put it back on. I left the foam off and those corner pieces off tho.
@JayyBird93
Жыл бұрын
@@TIRADORACING do you know what purpose that foam and corner pieces serve and if models that come stock with this bumper have similar parts there from factory? I don't mind taking them off if I need to but I would like to know why they are there.
@TIRADORACING
Жыл бұрын
Bro I have 0 clue. Just don’t be scared if it’s in the way toss it. I wasn’t building a Hellcat oem factory clone or anything so I threw away a lot of crap to cut weight.
@lilianalizeth7934
3 жыл бұрын
Hey bro I installed my hell cat hood as well on my 09 challenger but where the wipers go I have a gap there and if I wash my car it looks like water can go in to my engine do you have the same problem?
@TIRADORACING
3 жыл бұрын
Did you buy an OEM hood? Mine is OEM....
@lilianalizeth7934
3 жыл бұрын
@@TIRADORACING no I got a aluminum hood bro
@TIRADORACING
3 жыл бұрын
Man I don’t have the same problem lol.
@lilianalizeth7934
3 жыл бұрын
Ok thanks for the help
@n0bly_hades
4 жыл бұрын
So do I need to cut my fenders if my car isn’t lowered? What if I put 275’s all round and put spacers would I still need to cut my fenders? Because I watched two other videos and they had to cut their car fenders in order to make it fit with the tires! I don’t know if I need to do it too because they had their car lowered.
@TIRADORACING
4 жыл бұрын
I’m not saying to do this I’m just saying what others have done. stock ride height does not need to cut the fenders. @whipswitwavy on Instagram and KZitem is stock height no cutting. 275 is the width of the tire not the sidewalk height, you could literally throw 335’s on there but it won’t make the tire taller. The second number is sidewall height. I run 315/40/18, a 40 sidewall is pretty tall*
@PitchPerfectKill
3 жыл бұрын
I'm looking into ordering a similar bumper kit for my 2014. I know these bumpers need the 2015+ side markers, do they plug into the stock wiring harness, or do I need a newer style? Your car is hella sick btw!
@TIRADORACING
3 жыл бұрын
You’ll need a newer harness and have to do some cutting and soldering to make it work. Thank you that means a lot! 😁😁😁
@PitchPerfectKill
3 жыл бұрын
@@TIRADORACING Right on, appreciate the info!
@davidlockemusic
2 жыл бұрын
Did you ever end up getting side markers or finding where to get the newer harness? I’m in the same problem with mine.
@davidlockemusic
2 жыл бұрын
@@PitchPerfectKill did you ever figure this out? I’m looking to get the newer harness and don’t know where to order. Also, which side Markers did you end up getting?
@TIRADORACING
2 жыл бұрын
Yea I got a harness from eBay and one of my videos (it’s titled side marker harness or something) I show how to do it
@DonSodaRomero
4 жыл бұрын
so i have the front bumper and side flare kit, i’ll be getting demon wheels on all 4 corners and going 305’s in back and 275’s in front. will i have fitment issue? the rim is 18 inch. (scat pack 392) 2015
@TIRADORACING
4 жыл бұрын
Idk where you got your demon wheels from, but here’s what I read. The oem demon wheels will NOT clear the 6 pot brembo brake calipers The demon front brake calipers are smaller and closer to the design of the 4 pot brembo brake calipers. I have a 2009 srt8 so I have 4 pot brembos and they fit just fine. Clearing the brembos is the only fitment issue with the oem demon wheels. Of course those wheels are 18x11 and if your running those just be aware you might have clearance issues with your fenders and you might have to cut.
@tybaker4988
3 жыл бұрын
is the bumper you took off for sale
@TIRADORACING
3 жыл бұрын
This video is pretty old, I sold that a long time ago now. I know it’s not what you want to read. But thanks for watching Ty!
@jasperchristensen2117
4 жыл бұрын
Hey man! Any ideas on the specifications of the screws, nuts, and rivets? My kit did not arrive with hardware
@TIRADORACING
4 жыл бұрын
Man I have not a single clue. Just to verify, you purchased yours through vicrez? If you did purchase it through vicrez I would contact them directly.
@jasperchristensen2117
4 жыл бұрын
TIRADO RACING thank you!
@TIRADORACING
4 жыл бұрын
Good luck Jasper!
@davekosiek9288
3 жыл бұрын
Ha yeah just got my kit yesterday as well and came with zero hardware. But it came with a foam part to replace that plastic bumper you removed.
@TIRADORACING
3 жыл бұрын
Mine came with that foam too, I didn’t use it because weight reduction lol but just like I told the other guy I would contact them directly. Really weird they don’t have hardware with them
@TriangleSquare52
3 жыл бұрын
hey I'm subbed can you run over a build for your challenger? I have a 2009 SRT-8 with the 6 speed. Idk where to start, I'm thinking maybe the suspension and rear end.
@TIRADORACING
3 жыл бұрын
Hey “C”, I have a video explaining everything done to the car with links to the parts in the description. You can also dm me on Instagram (@tiradoracing) and we can talk more!
@anthonypalacios3842
3 жыл бұрын
Hey brother I have a couple of questions and I think you and your channel can be of great help . I have this bumper installed on my 2019 challenger and I have some gaps and I am not really happy with the outcome from the body shop . I have a gap on the grilled reinforcement . Is noticeable from close but not from far . I can show you pics if you have an email address or Facebook messenger . Maybe you can give me some guidance on how to go about fixing the gap .
@TIRADORACING
3 жыл бұрын
Facebook message me @tiradoracing or Instagram as well. @tiradoracing
@anthonypalacios3842
3 жыл бұрын
@@TIRADORACING hey thank you for your quick response
@mryoungman.
Ай бұрын
i have a 2012 and i’m looking into swapping my grille do i have to swap the whole bumper or just grille?
@TIRADORACING
Ай бұрын
The entire bumper if you want the hellcat grille.
@mryoungman.
Ай бұрын
@@TIRADORACING okay so say if i want to do a face lift to my car, will everything im trying to change on the front end have to be from the newer models?
@TIRADORACING
Ай бұрын
@mryoungman. Yes. Bumper, upper grille, lower grilles, side markers, headlights. I ground down a lot of the hellcat fascia for it to work with my older headlights.
@TIRADORACING
28 күн бұрын
@@mryoungman. correct! headlights from a 2015+ because their smaller, adapter wiring harness to make them work, bumper, grilles (upper and lower), and so on.
@alexandreminon1332
4 жыл бұрын
Will you install the 2015 headlights so that it fits properly ?
@TIRADORACING
4 жыл бұрын
I plan on making the switch later, I actually made it fit which I’ll show in the next video. I wanted to sort of give options. The 2015 headlamps and adaptive harness aren’t cheap lol I shaved down parts of the bumper and where the headlamps mount and got it to fit. You can see pics on my Instagram. My Instagram is mostly up to date, my KZitem has been behind. But working on catching up 🤘🏽
@Kr3wLeo
3 жыл бұрын
Hi did you end up getting new turn signal harness as my 2009 don’t fit the new wide body refector
@TIRADORACING
3 жыл бұрын
You need to get a new harness from the dealership then cut and solder the new ends onto your old harness.
@Kr3wLeo
3 жыл бұрын
@@TIRADORACING thanks also installing this kit myself :)... and also did you also end up having a big gap from the front bumper to the hood?
@TIRADORACING
3 жыл бұрын
That gap is from a seal you need to transfer. Your not the first person to say “there’s a gap”. You need to install a new weather strip seal on the front bumper
@JayyBird93
Жыл бұрын
@@TIRADORACING did you need new weather stripping or were you able to use your old stuff?
@TIRADORACING
Жыл бұрын
@@JayyBird93 my old strip was already torn bought a new one and replaced with new plastic rivets.
@ciroelpersa8150
4 жыл бұрын
you live in Austin TX?
@TIRADORACING
4 жыл бұрын
Yes sir!
@volunteertn1702
3 жыл бұрын
How long did this take and how much is the kit?
@TIRADORACING
3 жыл бұрын
Took me maybe 2 weekends to have it all done after paint. Link to parts in description of the video. 850 for bumper 690 for flares
@volunteertn1702
3 жыл бұрын
@@TIRADORACING ok nice I didn’t even know the body of the challengers was the same as the 2015 and up ones
@TIRADORACING
3 жыл бұрын
The chassis has been the same since 08. The 15’s and up have a different interior, front bumper and rear bumper, door handles and some other things depending on the trim level. But for the most part same chassis with same mounting points.
@volunteertn1702
3 жыл бұрын
@@TIRADORACING yeah I know the interior is different I was just talking about the chassis
@TIRADORACING
3 жыл бұрын
Annnnnnd I was just talking about the challenger chassis as a whole. I 100% understand what you were talking about I was just touching base on all the changes for any reference or context.
@1440club
7 ай бұрын
What year front bumper ???
@TIRADORACING
7 ай бұрын
My car 09, the aftermarket one is a Hellcat one so 15+.
Пікірлер: 128