insert leads into the proper slots....thank you for the clarity
@andrewlevin7433
3 жыл бұрын
I admire your attention to safety!!! Thank U
@pettits49017
3 жыл бұрын
"Set the volt/ohm meter on the proper AC measurement setting" - thanks for the ambiguity. So helpful.
@DD-ok1md
2 жыл бұрын
Hes a dolt
@killswitchh
10 ай бұрын
The only reason we're here.
@312af
8 ай бұрын
Thank you
@bennyhill6024
4 жыл бұрын
Thank you....
@Dmac92able
8 ай бұрын
Lol what are those safety glasses gonna do when you ground yourself to 240 😂
@shadowriftsmovies
8 жыл бұрын
Please update quality of video to correctly see settings on meter
@szaki
7 жыл бұрын
anything higher than 240 V! Logical, eh?
@prestonmolloy808
9 жыл бұрын
Awesome vid. I'll remember this. Get my thing, set it right, be careful and check for stuff. Let me guess, this is meant to supplement an eHow tutorial.
@chljurado
2 жыл бұрын
So... what is the multimeter set to..?
@jfkesq
11 ай бұрын
duh...the "proper" setting
@back2skooldaze
9 жыл бұрын
I have tried this with my multi meter and i get 240v on the two bottom pins but when trying the top pin and one of the bottom pins i don't get a reading if i swap the probes around i get 240v??? I am testing my own electric 3 pin wall socket so the two bottom ones are 240V and a bottom one and the top together i don't get a reading but swapping round the probes i get 240v not 120V??? Which is what i wanted
@stevelane1554
8 жыл бұрын
back2skooldaze
@hilham89
6 жыл бұрын
Would be nice if it was in 720 so you can actually read the screen
@Fallen_acolyte
7 жыл бұрын
Guys hes very clear. When He says Proper AC measurement settings he means measuring AC above 200. Hes clear... you just have to use your head a bit
@judypotter1797
7 жыл бұрын
Really? "You just have to use your head"?? One must have specific information in one's head to access and use that information in a practical setting. I would bet that many watching this video were watching it for this one specific piece of information. And most watchers have probably already read endless blogs and how-to's looking specifically for "AV" and "above 200." There are a lot of settings on my digital multimeter. How difficult is it to be specific? Some videos say "check your manual." If I had a manual, I wouldn't be watching this and twenty other videos trying to see where the dial is set! So thank you very much for simply giving the info I needed.
@brandontodd6108
3 жыл бұрын
Why gloves?
@jfkesq
11 ай бұрын
so they burn and fuse to your skin
@michaeledmondson4385
9 жыл бұрын
Worst tutorial I've ever seen. What is the "proper AC measurement setting"? How to I "properly plug in the leads". Thanks though for explaining that he was putting on gloves and glasses while I watched him put on gloves and glasses.
@AJSchultz
7 жыл бұрын
for further instructions on which setting to use, read the manual on _your_ voltmeter/ohmmeter. For the scope of this video, reviewing every setting would be useless info to folks with different tools. What was covered here, during this video; was useful for testing the voltage on a 240 outlet.
@josephchen920
5 жыл бұрын
Exactly this. "Here's how you do it. Do it the right way. And that's how it's done." He could have at least said how to select, or at least said what he's selecting for 240V.
@repro7780
3 жыл бұрын
Mechanix gloves are not safety gloves, sir.
@-NoneOfYourBusiness
4 жыл бұрын
There is no such thing as a "top slot" and "bottom slot". There's a Neutral, there's a Ground and there are two "Hot" or "Live" slots. The outlet can be installed sideways or upside down for any reason. DO NOT listen to that video explanation. That video should be removed, in fact.
@404chillwill
5 жыл бұрын
Would have been a better video if the viewer was blind...😨
@rickdangerous5606
4 жыл бұрын
not a good tutorial no wonder sears is dead
@ShadowzTheHusky
6 жыл бұрын
Anyone following this tutorial would die.
@missystokes4542
5 ай бұрын
This video was VERY incomplete. I cannot see what the meter is set to, he just says proper. That is not helpful to a non-electrician.
@WestTNReb343
Ай бұрын
You don’t say what the appropriate setting is DUH!
@stephenboothby7446
9 жыл бұрын
Rubbish.
@Panzerlang
8 жыл бұрын
Useless.
@stylz711
4 жыл бұрын
You never said what to set the dial on when checking 240 volts 👎🏾
Пікірлер: 40