I thought this would have been easier. Now my brain hurts. Great explanation and will come back to this when my brain is less cluttered and can absorb this information
@itaist
2 жыл бұрын
thanks a lot! can you share your spreadsheet?
@bobfixes7640
Жыл бұрын
I built this spreadsheet based on his description of each triangle. It seems to work but difficult to determine if I have any errors. It would have been very useful to see the real life results in the video to see if my spreadsheet works correctly.
@philwoodward8235
Жыл бұрын
That was an amazing tutorial thanks. I would really appreciate a copy of the spreadsheet.
@kinglost9523
3 жыл бұрын
May have the excel sheet for my use please?
@cowboys168
2 жыл бұрын
It is really good for me. Noted where I understood and you correct me in advance after watching the video. Could you share the spread-sheet to me? Thank you so much.
@TimWynnAlabamaRollTide
Жыл бұрын
The Spreadsheet share would be nice so I don't have to re-create. Thanks in advance.
@danba1769
27 күн бұрын
How does this change if instead of trying to open a toolbox lid, I am trying to open a garage door completely out? Running into issues with triangle 2.
@mjones2431
Жыл бұрын
Any way I could get a copy of the spreadsheet?
@giandomenicopriore5412
3 жыл бұрын
hi, could you share this useful tool? Thanks in advance
@wayneeaston8287
2 жыл бұрын
@Aaron please could you share your spreadsheet. It would be so helpful as a reference. I would really appreciate it. Thank you.
@SharathShetty-p8i
Жыл бұрын
Thank you very much for detailed video. Please upload the excel sheet.
@the_natrix9959
2 жыл бұрын
Are you willing to sell this spreadsheet?🙃
@bradhall7155
5 ай бұрын
All my life I've wondered, "why did we learn triganometry in school, I'll never use this in the real world"? Who'd have thought I'd need it to keep my toolbox lid up?? Now I wished I'd listened more in class.....
@danba1769
29 күн бұрын
Is the excel sheet posted?
@davidsassoon4657
2 жыл бұрын
Great video, thanks!
@GLHerzberg
6 ай бұрын
Very glad you produced this valuable video. It provides a thorough explanation of the trigonometry and calculations behind the analysis without divulging too much info as to give away the process yet all the necessary info is there. Ya, just gotta pay attention! I think that creating the spreadsheet is left as an exercise for the student to enhance their comprehension. Title typo in video at key-frame 0:00 - missing 2nd L in CALCUATION.
@kamilwojcik7479
2 жыл бұрын
what about friction? :)
@ElMakk_Med
2 жыл бұрын
thank you for your efforts, i know you have your own reasons to hide the results...but it would've been better if you could show how it's done closely,
@the_natrix9959
2 жыл бұрын
I have a 7 point hinge. The hinge point moves/floats elliptically as the arms lift, kind of like a scissor lift. How can I calculate this?
@SD-nj1cy
2 жыл бұрын
I actually need this in the real world. i just bought a tool box and it only opens 70-80 degrees. i want it to open 90 degrees. I have one pivot point i cant move and one i can. is there a resource i can leverage to just tell me how long and strong a gas strut i need to use? i stink at math
@dalecaswell4793
Жыл бұрын
@Aaron is this spreadsheet something you could share?
@JetScreamer_YT
Жыл бұрын
If I turned this upside down, would it work with a murphy bed?
@undeadfury55
3 жыл бұрын
Why isn’t the excel document in the description? Does it not work?
@Kirbythediver
3 ай бұрын
These are good maths.
@prince-of-saiyan
9 ай бұрын
Real example of applied Mechanics 🙏🙏🙏🙏😁😁😁
@truoghv
7 ай бұрын
Can u share speadsheet ? thank a lot
@stallion63m35
2 жыл бұрын
Conversely,the brackets can be reversed. The curved one on the lid and triangular one on the inside of the box.This way the lid will snap shut keeping the lid fully closed and allow opening normally when it's opened by hand.
@W0NT0NFU1
2 жыл бұрын
🤯
@gunaselansadanantham867
3 жыл бұрын
you are smart.
@takundamacheka5357
3 жыл бұрын
Love this
@yankos_
3 жыл бұрын
+Aaron Schellenberg. Viewers!!! If you are watching this video, do not use this method!!! If Aaron can't show the working out it doesn't work. AVOID!!!! The lid will fall on your head or your child will loose a finger!!!! AVOID!!!
@Itsmellsfishy
3 жыл бұрын
Are you serious? His working out is the entire video. If you cant do force analysis, dont attempt this.
@yankos_
3 жыл бұрын
@@Itsmellsfishy There is no working out shown anywhere in this video, just theory, to the extent where a spreadsheet is shown and this is also redacted, not showing results. Further, the formula bar is also redacted, not showing formula used. Why? I assume, that he has no confidence in his own calculations and hence there is not toolbox video. In my world as a mechanical engineer, and in the past as a applications engineer, I can do all the calculation for a design. At the end of the day the manufacturer/supplier of the component, will certify a design with an applied product, and take responsibility of the function of the assembly, allowing for real world variability, not pythagoras and spreadsheets.
@Itsmellsfishy
3 жыл бұрын
Yes he is just using pythagoras for simple geometry, but if youre a practicing engineer, it wouldnt take long to get the numbers he has hidden. Is there a flaw in his logic I am missing?
@stallion63m35
2 жыл бұрын
@@yankos_ "the function of the assembly,allowing for real world variability" That's what really matters! Not theoretical jargon.
@andremartinho913
2 жыл бұрын
Maybe you would be kind enough to share a spreadsheet with your calculations, given the same 16lbf lid weight, same McMaster-Carr brackets and the same gas spring?
Пікірлер: 37