Thanks Allen! It’s a cold December evening & the boiler came up with the F4 error message last night! Over the moon, followed your instructions this morning and I’m back in the land of warmth! Big thank you 😄
@yungee3921
4 жыл бұрын
Thanks ever so much for this very clear, very straightforward video. I fixed the F4 fault following your instructions so I have hot water again for now, but sounds like I need to get it serviced. It hasn't been touched for a few years at all I think. Cheers!
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@piotrzalcer858
Жыл бұрын
Thanks Allen! It's a cold November evening & the boiler came up with the F4 error message last night! Over the moon, followed your instructions this morning and I'm back in the land of warmth! Big thank you aus Germany Frankrurt a Main
@johnsharpe734
9 ай бұрын
Thanks Alan turning off/on cured it short time...but contacted the engineer....as you recommended
@bostjanstefancic6108
9 ай бұрын
You saved my problem. It was condenzating water. 😊
@kathleentheverybestigreene8186
Жыл бұрын
Thank you so much for a simple explanation.👏👏👏
@nobody7817
2 жыл бұрын
(BTW--No idea what make or model this heater is--but your TS guide got me there!) New apartment (company provided), no hot water when I got here at midnight last night. I spent the morning trying to find the water heater...then found the F4. Looked at your video, 45 ish seconds in you say, "Gas repairman"... oh dandy...is there any gas on the stove, dummy? No? Ok I think I found the problem--they forgot to turn on the gas! Thank you so much!!!! (LOL I almost feel stupid, but then again, I thought all of these heater types were electric--I did not know they ran on gas...) EDIT: Found the gas main, turned it on, and all is happiness now! Thank you for the spot on troubleshooting guide!
@JamesWoolfordDesign
2 жыл бұрын
Reset as mentioned and it worked and fired back up! Thanks for this.
@neilpritchett1793
Жыл бұрын
It worked and save me a few quid. Thank you
@stephenreid1481
3 жыл бұрын
Brilliant did the reset and worked straight away. Thanks
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@mikloslaura1691
3 жыл бұрын
Allen Lifesaver Hart! God Bless You!
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@Frank-Tic
3 жыл бұрын
Saved my bacon on christmas eve, looks like it was the condensate pipe for me. Thank you and merry christmas to all.
@AllenHart999
3 жыл бұрын
Happy to help.
@ahmetgure1506
3 жыл бұрын
At these frozen nights your video becomes my heat source, thank you very much. I hope u like my coffee. 😉
@AllenHart999
3 жыл бұрын
Thank You so much.
@richardpayne-withers1768
4 жыл бұрын
Thank you so much for saving me, the wife was cold and I was getting no where until I checked a couple of your videos: saved my bacon.
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@imaley
3 жыл бұрын
Thank you only needed 1.49 minutes
@gertvanderpaelt
3 жыл бұрын
This was helpful. Thank you!
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@gwenwild5268
Жыл бұрын
Thanks Allen sorted 😊👍
@explained8864
4 жыл бұрын
Thank you are an Angel!
@AllenHart999
4 жыл бұрын
Happy to help!
@digitalyume
3 жыл бұрын
Thank you for this video :)
@AllenHart999
3 жыл бұрын
My pleasure!
@diandrra1
4 жыл бұрын
Many thanks, just resetting it fixed it!
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@mariatatay
4 жыл бұрын
Thanks, very useful
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@keithbrueton
5 жыл бұрын
Nice one thanks Allen
@AllenHart999
5 жыл бұрын
Thanks.
@owsi2297
5 жыл бұрын
Cheers mate love these videos 👍
@AllenHart999
5 жыл бұрын
Thank you.
@umarchetty7106
4 жыл бұрын
Works perfectly now. Thanks allen
@AllenHart999
4 жыл бұрын
Great to hear!
@alexwood2219
3 жыл бұрын
Decent thanks
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@inspire_motivate_be_positive
5 ай бұрын
Hi Allen, i have a vitroden 100 oil burner, i am getting the F4 error, and saw that the oil tank is very empty, how can i fill more fuel oil and what oil does it use, its so cold in here. Thanks
@Mariazellerbahn
2 жыл бұрын
Thank you for the video. Mine is an ordinary (non combi) Viessmann boiler fitted two years ago.. During the summer, I use an electric immersion heater for my water as I don't like the humming of the pump and don't particularly like gas, or water being pumped around. Just switched the boiler on (for heat and water) for the first time in 8 months and straight away got an F4 code. No idea what I was doing and noticed that the on-off switch wasn't pushed in .... It fixed the problem but have now come on youtube for some advice if it happens again.
@MrGreen-td6dw
3 жыл бұрын
A friends Boiler was showing the f4 fault code. His spark electrode was so bad it was warped. A new electrode fixed the issue.
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@yensabi
5 жыл бұрын
Spark genny's are notoriously bad on these boilers , it's a design fault and viessman don't seem to have resolved the problem , I won't fit these anymore and I always recommend Baxi's to customers these days , cheers mate......👍
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@JSY987
5 жыл бұрын
thhhaaaannnksss :) its work !
@AllenHart999
5 жыл бұрын
Happy to help, Thank you very much for watching.
@dacelticcross
3 жыл бұрын
had the f4 fault and it was just the propane ran out on one of the bottles,so i switched it...scared shit out of me lol.
@eoindoherty122
2 жыл бұрын
Done the reset, f4 error disappears for a while but flame icon never appears and f4 comes back. The gas meter guy came to do maintenance on the meter before his happening so it’s connected to that most likely
@andrewsutton7007
4 жыл бұрын
...block internal condensate pipe can also result in the F4 code...
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@metallitech
5 жыл бұрын
I think this was the error code that we were seeing about a year ago (new boiler). Viesmann put in a new board and the problem went away.
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@robkosinc
3 жыл бұрын
Hello, do you know how to raise the water pressure?
@AllenHart999
3 жыл бұрын
kzitem.info/news/bejne/mqxvv4yIkZdkpqA
@tobiandrei2117
5 ай бұрын
The problem with F4 i fixed but after few days i got this problem when the boiler starts give me the error 0E. Can somebody help about this one?
@petersutton3054
5 жыл бұрын
Spark generator on pcb
@AllenHart999
3 жыл бұрын
Thank You
@laszlobauer5274
3 жыл бұрын
Also check the if the gas sensor closed the gas shut off valve if you have that. It did not sound, and I did not have a leak, it just shut off because of the dust (the house is still under construction)
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@djbone9322
2 жыл бұрын
On peut traduire ça en français comment
@zlac
4 жыл бұрын
For me, it was "no gas"
@AllenHart999
3 жыл бұрын
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@tanjuverimbas5721
3 жыл бұрын
Türkce nasıl anlaya bilirim
@AllenHart999
3 жыл бұрын
Thanks
@hiemsx
3 жыл бұрын
why the fuck does my NEW boiler have this fault? thank you tho!
@johnfithian-franks8276
5 жыл бұрын
Hi Allen, I am worried that if you show things that should be left to an engineer that people will try to do it themselves to save money, I am a hobbyist DIY'er and have built everything from underfloor heating to an entire house, but I will not touch gas because I don't trust it. My worry is that if someone has the same skill set as me but not the nagging "do not touch gas" thing they will try to save money because you have shown them how to sort a problem and that is a dangerous thing to do. By telling them it could just be needing a service or cleaned out they are going to think that they are capable to use a hover and clean it out without the safety of a registered gas engineer.
@AllenHart999
5 жыл бұрын
Hi John, Thank you for your comment, You make a very good point. Lots of manufacturers are doing these types of videos now, hopefully, my advice comes across to always use a gas engineer. Thanks.
@joeeager4717
9 ай бұрын
Hi Allen. F4 fault. I have changed the electrodes,leads and pcb(as advised by viessmann) and still f4. No issue with gas 22mbar. Any idea?? Thanks.
Пікірлер: 71