Dude!!!!!! This is the exact model Cat that I have!!!!!!!! I can't wait to see what you do with it! That is the bike those decals I sent you are for, pretty sure? I had to shim the steering neck with a trimmed down beer can to get the play out of it LOL. Honestly it worked great! I don't have the original brake caliper, but mine came with a scrub brake. I still need to install the chain guide you sent to me. Hell yes dude! We both have the same CATs!!!!!!
@BustedKnucklesBuildsTexas
Жыл бұрын
That’s cool brother, I got to find fenders and other parts for this bike , but I can put that stuff on later, thanks for watching brother!
@roberthernandez3989
Жыл бұрын
Absolutely a flathead but then again that bike is going to look great bro looking forward to the next video 🤘
@BustedKnucklesBuildsTexas
Жыл бұрын
Right on , Thanks for watching.
@ElijahMiniBikes
Жыл бұрын
I’m doing a Briggs build on a Fox MiniBike. First time working with a Briggs on a MiniBike project. I did get rid of the tank and carburetor combo and put a slide carburetor on instead. Might be cheating at that point but I want something that’s reliable and won’t leak everywhere. My engine was full of water, stuck valves and blown head gasket. Still somehow ran after freeing everything up.
@BustedKnucklesBuildsTexas
Жыл бұрын
Right on ! Sounds like you got a fun build going on !👍👍
@fatbuddycat
Жыл бұрын
I need more vintage.....just found some cracks on my Ct100 i was working on.
@BustedKnucklesBuildsTexas
Жыл бұрын
Yup , I like the old stuff .. lo , I look over any bike I do real good , they all have something that needs to be fixed on them , but that’s the fun in it , to make it new again 👍
@rogermcdonald1607
Жыл бұрын
I think you did do a video of the tiller. Rick i think that would be a good powerplant for the slingshot. Sparkly green would be a cool color with the chrome and one of those fancy seats with like some green stitching. ✌🎥🇺🇸
@BustedKnucklesBuildsTexas
Жыл бұрын
Right on , I think the green will look cool , and going to have my seat guy do something cool on the seat , thanks for watching bro
@ChrisProvazek
Жыл бұрын
I will have you a new chain guide for this build asap sir. Project looks great!
@BustedKnucklesBuildsTexas
Жыл бұрын
Thanks bro !!
@lonestarracingenginesgokar2202
Жыл бұрын
Yes!! Do the Briggs!!
@BustedKnucklesBuildsTexas
Жыл бұрын
I think that’s the plan , thanks for watching
@heathenprojects2639
Жыл бұрын
I did a 98cc for my scat kat does 38mph
@coolbreezetony724
Жыл бұрын
I have a lil rascal with a tecumseh on it. Runs good. I lost the brake that was on it. Would Go Power Sports carry one? The mini bike might go up for sale, or I considered sending in to Busted Knuckes for some mods.
@BustedKnucklesBuildsTexas
Жыл бұрын
Sounds like a cool bike , and yes , gopowersports has the brake parts that you need , Thanks for watching
@coolbreezetony724
Жыл бұрын
@@BustedKnucklesBuildsTexas can I get an email address for Busted Knuckles? Thanks.
@coolbreezetony724
Жыл бұрын
@@BustedKnucklesBuildsTexas I’ll email photos and questions. I’m not 100% sure it’s a lil rascal. This one is yellow. The fork damage on that Cat could take stainless or metal collars over them and then weld/grind everything down together?
@BustedKnucklesBuildsTexas
Жыл бұрын
Message me on Instagram sir
@jermainesmith4788
Жыл бұрын
Where you go by finding the old school frames at ?
@BustedKnucklesBuildsTexas
Жыл бұрын
Facebook minibike pages , and Facebook market , and friends
@blackrabbithandcraft4124
3 ай бұрын
Im about to do a build on a cat where did you find the wheels
@BustedKnucklesBuildsTexas
3 ай бұрын
@@blackrabbithandcraft4124 if you are looking for the wheels and stars , you can looking on some of the vintage minibike pages on Facebook , the tires I got from gopowersports , good luck on your build 👍
@lucassarchet6712
Жыл бұрын
Id love to see one of your Briggs builds on this one! The little one i sent you is for a bird build right?
@lucassarchet6712
Жыл бұрын
Also, I've got a couple extra header pipes if you need one.
@BustedKnucklesBuildsTexas
Жыл бұрын
Yup going with the Briggs , the one you gave me was in the truck when it got stolen, and they tool it !?
@BustedKnucklesBuildsTexas
Жыл бұрын
Going with a loop pipe if I can find one .
@DeltaNineProductions
Жыл бұрын
I can't say for sure, but the 5hp might not line up with the rear sprocket without a jackshaft.
@BustedKnucklesBuildsTexas
Жыл бұрын
I will find that out when I mock it up , keeping fingers crossed 🤞.
@ALMIGHTYGARAGE
Жыл бұрын
Hey brother how much do they charge where your at to get forks like that re chromed
@BustedKnucklesBuildsTexas
Жыл бұрын
I use JB chrome plating in Dallas , I think the last set of forks they did was around 200. Dollars
@ALMIGHTYGARAGE
Жыл бұрын
@BustedKnucklesBuildsTexas ain't bad I'm trying to figure out what I want to do with this night hawk thinking about just keeping it all original just clean it up wish I could find original engine hs40 I have tons of briggs but I've never actually seen any old tec engines
@BustedKnucklesBuildsTexas
Жыл бұрын
Swap meets is a good place to look for old engines , I have got some good ones real cheep ,
@miguelpagansr6128
Жыл бұрын
How about a power bee two stroke? It’s been a while since I seen one with a two stroke.
@BustedKnucklesBuildsTexas
Жыл бұрын
Now that would be cool , but don’t have one . So got to go with what I got laying around .
@miguelpagansr6128
Жыл бұрын
@@BustedKnucklesBuildsTexas I hear that brother, can’t wait to see what you do next.
@alejandromejia4996
10 ай бұрын
I got some decals from ebay but I didn't like the because i have the slingshot 3x an the decals read 350x that bike looks like a 350x because it got disc brakes my 3x has a shoe design brake system i took measurements an took pictures an just took them to a printer guy i should have a new set Friday
@BustedKnucklesBuildsTexas
10 ай бұрын
Sweet , glad it’s working out for you !! I’m working on my sling shot right now 👍👍
Пікірлер: 39