I wouldn't call myself an "engine" person, but I have really enjoyed this restoration. You are meticulous - and the bare foot technique is critical!
@AJRestoration
3 жыл бұрын
It would not work without the barefeet hahahaha
@patricioquevedonieto3553
2 жыл бұрын
@@AJRestoration q
@restaurandocoisasvelhas
2 жыл бұрын
up.
@近藤寛-p6y
2 жыл бұрын
@@AJRestorationさふじy
@georgesabol459
2 жыл бұрын
You do a very nice restoration job. If I may offer a suggestion Although it costs more , I like to plate certain parts mainly hardware. Paint on carburetors can cause problems. Of course it adds outside cost. I get it. I restore anything from Clinton, Wisconsin, Kohler k91- K90. They are Americana...... Good luck.
@spice1960
10 ай бұрын
We have a old kohler engine on a tree shaker but don't know the model. Think it needs a new head gasket
@jamesfield5346
Жыл бұрын
I agree 100% about not painting the carb.
@jamesfield5346
Жыл бұрын
Wish you had some of that footage. Absolutely love the sounds and f a good hard thunderstorm
@TheBalconyWorkspace
11 ай бұрын
I just love the birds in the background. Excellent video as always!
@mustanggtcs09
2 жыл бұрын
Very nice…. Love the restoration
@restaurandocoisasvelhas
2 жыл бұрын
Very good brother. You are the best. I'm from Brazil.
@EVILDR235
3 жыл бұрын
Very nice. I have many small engines, but no Kohlers. I didn't know Kohler such a small engine. All the ones I have seen were quite large. Once again great job.
@AJRestoration
3 жыл бұрын
Thank you very much! This little Kohler is now my favourite.
@suyo2485
2 жыл бұрын
Fine job
@re-fix9678
3 жыл бұрын
Good restore👍
@dineshshahi7177
2 жыл бұрын
eska charging coil ka magnet kaha banta hai
@hellhound1389
2 жыл бұрын
I used to do this for a living, I worked at a small engine repair shop and all the antiques would be sent my way and I would get them screaming. My favorite is the tecumsah long stroke cuz even though the horsepower ratings were low the torque was very high and equal to modern day twin cylinders
@AJRestoration
2 жыл бұрын
I would love to have one of those Tecumseh engines. Slowly growing my little engine collection.
@نسكزئ
2 жыл бұрын
Raining outside makes me feeling like I'm living in a cottage between mountains..that is what I had lived fifty years ago.
@AJRestoration
2 жыл бұрын
I love the rain!
@allstareagles2376
2 жыл бұрын
500k subs fast
@AJRestoration
2 жыл бұрын
I hope so hahaha
@naito2756
2 жыл бұрын
Máy còn mới mà tháo ra là phá máy đó. Trình độ nhận diện máy kém quá. Chỉ cần xúc bxc và đổ nhớt vào thôi.
Mình cần mua phụ tùng có không bạn mình ở Việt Nam Mình rất đam mê máy kole4
@khoiphan9863
2 жыл бұрын
COLE NÀY LÀ LOẠI ĐÔ CÔ NE. 20 NĂM TRƯỚC K CÓ TIEN MUA NÔI ĐÓ
@VicenteTolentinoVigueras
3 ай бұрын
De cuantos caballos es ese motor
@korakitisiakovos673
2 жыл бұрын
very.nice.i,did,the,same.to.my.k181.
@adenamsekian5279
2 жыл бұрын
U are very careful on your work probably U may Become A BEST MACHANIC .GOoD LUCK.
@ovcarenkovitalij80
2 жыл бұрын
👍👍👍👍🤩
@ljkkj2511
3 жыл бұрын
better not use paint, just leave like it is
@smallengineshop112
2 жыл бұрын
You should gave painted the original color
@AJRestoration
2 жыл бұрын
I don't think so, Its my engine I could make it pink if I felt like it. I have no attachment to the original color of any item.
@SachsVDE
2 жыл бұрын
Barefeet Necessary !...😂 Cave's Man instinct is calling..😁⚙️ This vid was like watching "Lord of the Rings", too damn long..😅👍
@danielkelly32
16 күн бұрын
💯💯💯💯✔️✔️✔️✔️😊
@taubiennews
2 жыл бұрын
Ok
@AJRestoration
2 жыл бұрын
Ok
@Master32621
5 ай бұрын
У меня тоже такой есть. Видео У меня на канале.
@vinhly7530
2 жыл бұрын
Kohler 4hp
@louiscypher6772
3 жыл бұрын
Jesus christ! The birds are as annoying on your video as they are outside my bedroom window.
@osk310
Жыл бұрын
Can I send you my engine?
@AJRestoration
Жыл бұрын
You can yes.
@osk310
Жыл бұрын
@@AJRestoration let’s work something out. How do I get a hold of you?
@supershifter6066
Жыл бұрын
👍
@utmuoihuynhvan8579
2 жыл бұрын
Đẹp vậy
@hanhnguyen5908
2 жыл бұрын
hello
@hanhnguyen5908
2 жыл бұрын
hello
@phuocphan9126
2 жыл бұрын
Ngày xưa nhà mình cũng có một con máy này cũng là đồ của mỹ đế là ok
@battlejack1863
8 ай бұрын
What kind of critter is making that noise in the background?
@simefestin
2 жыл бұрын
You put back old main bearings,piston rings and gaskets🤦🤦🤦🤦
@luiscontreras4998
Жыл бұрын
What oil does this engine use? I have one, but I don't know what oil it uses
@AJRestoration
Жыл бұрын
I always use SAE 10W-30 but that all depends on your climate and the season you will use the engine in.
@brucebonkowski4526
3 жыл бұрын
I meant the engine I used battership gray or rusteloum hammered black
@oldavguywholovesRCA
2 жыл бұрын
What bird was that sounding like a drunk cuckoo bird?
@АлександрНиколаевич-х5я3в
2 жыл бұрын
Нужно было претереть клапана, заменить поршневые кольца, заменить возд. фильтр, а так это называется перекупский вариант...
@adamideus9222
3 жыл бұрын
I think that valve is a priming valve since it opens on the top
@AJRestoration
3 жыл бұрын
It is, I used it to prime the fuel yesterday.
@adamideus9222
3 жыл бұрын
@@AJRestoration Keep up the good work my friend
@slimwantedman6694
3 жыл бұрын
Good morning from Southeast South Dakota
@AJRestoration
3 жыл бұрын
Morning!
@CUONG860
2 жыл бұрын
Cu le hai thằng đè ba thằng giật
@khanhan10.58
3 күн бұрын
What year was this engine manufactured?
@havan4140
2 жыл бұрын
Nhiêu tiền vậy bạn 1cai
@nguyengiau1058
2 жыл бұрын
Sử dụng rất OK
@duc2516
2 жыл бұрын
Máy này rất thông dụng cho nhà nông VN mình, chạy ghe máy đuôi tôm bơm nước.vv. Kohler Clinton và BS là những máy trước 1975. Giờ đây có nhiều máy Honda gọn và dể xữ dụng hơn nhiều.
@jayyoung5423
3 жыл бұрын
It was green from the factory, why black now?
@AJRestoration
3 жыл бұрын
It was a funny blue, I could not match the blue, so I went custom. And I liked the black and red idea.
@carlynlaarmyv5373
2 жыл бұрын
Te falto enseñar como se ponen las válvulas de admisión y escape ahí saltaste, yo soy mecánico de planta eléctrica
@brucebonkowski4526
3 жыл бұрын
I love Kohler engine as the Wisconsin they were hard working engines and lasted long time if maintained I don't know why they paint the carb I cleaned it like you and spray clear spray know I polished my float I know they going to get tarnished but I painted mine with 2coats of clear nail polish but if you run Sea Foam in the fuel system cleans I used battership gray
@hellhound1389
2 жыл бұрын
I was a tecumsah guy, the long stroke engines were amazing and I had one that was fifty years old and still ran when I put it on a wheel horse and sold it to a guy that wanted a small tractor that could pull around trailers at a campsite
@brucebonkowski4526
2 жыл бұрын
@@hellhound1389 Tecumseh we're a great engine I hated to see them go
@hellhound1389
2 жыл бұрын
@@brucebonkowski4526 well that's what happens when you team up with sears and craftsman, I haven't bought craftsman tools since harbor freight opened in our area. Also working at a small engine repair shop for years I learned just how crappy craftsman mowers became. I had a 51 sears and roebuck (became craftsman) and it could pull a stump with minimum effort despite its small size but modern craftsmans blow the tranny pulling a leaf vac
@brucebonkowski4526
2 жыл бұрын
@@hellhound1389 yes but Briggs went to everyone from.hardware to Kmart and other but we had lawnmower I running in my business snapper aluminum deck and jacobsen 20 commercial rotary I can strip them down strip them and repaint the push mowers still are the same but mine don't rust I bought new one and with being careful and scrape multiple times the decks rusted in 3yrs and Briggs quatrum were junk I have a Briggs twin cylinder on a walk behind we are going to pull it and swap it with a older brand new engine it having vapor lock won't start after running it hard to start they made the mower like the car high prize but quality 2out of 10
@hellhound1389
2 жыл бұрын
@@brucebonkowski4526 just cuz Briggs was highly available doesn't mean it was better, I would come across a lot of Briggs that would bust the diaphragm on the carb and it wouldn't take too long and it would be back in the shop for the same problem or the block would crack at the valves especially the exhaust side and you'd have to replace the engine. Give me good old cast iron block tecumseh, the block would hold up to anything
@Tshizzle42o
2 жыл бұрын
It's missing the tin for the head
@stoveboltlvr3798
2 жыл бұрын
Looks great, I never had a chance to work on a Kohler but always wanted to. I like your detail work, I'm the same way when rebuilding. I agree with not painting the carburetor but I might polish it.
@VornWood
2 жыл бұрын
👍👍👍 Heat the aluminum pulley and remove it with a puller. Spray the wd40 before and after.
@trojanpussy
2 жыл бұрын
Your birds really sound soooo loving and happy
@AJRestoration
2 жыл бұрын
They are!
@trojanpussy
2 жыл бұрын
I won't skip. I love to see it again now i dont have to smell it😜
Пікірлер: 87