That’s a great new life for a lowly Hawk Hill. Bet it rides like a dream.
@TheUndeadMechanic
Жыл бұрын
Thanks. It sure does. Agreed that even though the Hawk hill wasn't a top offering of Marin at the time, that doesn't mean it's any less fun or practical in its new capacity.
@suchpastiche312
Жыл бұрын
as far as i am concerned you can do no wrong stupendous
@TheUndeadMechanic
Жыл бұрын
Thank you. I sincerely try to do the best I can with what I have available, and it is always nice to know that it is appreciated.
@jamesschmidt395
Жыл бұрын
Das zu schauen ist sehr beruhigend.
@john-mikaeljarvenkyla
Жыл бұрын
nice vid and great music
@Edgar-fq8kx
Жыл бұрын
Wow, what a fantastic build
@bambangsuseno8764
Жыл бұрын
The Build of Marin Hawk Hill is absolutely impressive and awesome. Warm greetings from "The White Monument", The Special Territory of Ngayogyakarta Hadiningrat (Yogyakarta), Indonesia.
@TheUndeadMechanic
Жыл бұрын
Thank you 🙏🏼
@8888swatt
Жыл бұрын
Some bikes just look 'right'. Nice job. Really like those bars - would love to know what type/style they are?
@TheUndeadMechanic
Жыл бұрын
I appreciate your kind words. I do try to respect the original geometry and aesthetic while modernizing the functional aspects. The bars are new old stock downhill bars from the 90's. I have a few up on my shops website if you are interested. Check the links in the bio.
@tecdesigns8183
Жыл бұрын
Great build looks purposeful. I have the same if not similar bars on one of my bikes think they're called dark angels
@TheUndeadMechanic
Жыл бұрын
This particular bar was unbranded. So no such name.
@tecdesigns8183
Жыл бұрын
@@TheUndeadMechanic theyre very strong design
@SeventhTenant
Жыл бұрын
Super nice, pleasure to watch you doing great work! Love your tips and insights!
@thinkpadBentnoseTheBlind
Жыл бұрын
Yeah man. Do it! Good stuff
@TheUndeadMechanic
Жыл бұрын
Nothin to it, but to do it. Thanks.
@clarenceherrero7773
Жыл бұрын
Hello sir, may i ask what's the size of the Headset that you installed? And it is a standard size or not? Thankyou in advance sir
@TheUndeadMechanic
Жыл бұрын
Maybe i am misunderstanding the question but the headset measure is not determined by me, the headset is determined by the frame and fork. There were a few different standards during this era. The most common being 1" threaded or ahead system, and 1 /8 thread or ahead. There were a few odd standards in between but the majority were these two. The frame's headtube will have an inner diameter to match either 1" or 1 1/8. The fork will correspond with the frame in size and determine which system, either threaded or ahead.
@john-mikaeljarvenkyla
Жыл бұрын
those tires are evil looking...
@magitingtv.7704
Жыл бұрын
Nice job sir 👍🤠🙏🎄
@TheUndeadMechanic
Жыл бұрын
Thank you😊
@mikecampos3505
Жыл бұрын
Hello , what You think about a Muir wood model for put some money ? , maybe same year like your build.
@TheUndeadMechanic
Жыл бұрын
The Muirwood is similar to the Hawk hill in that it was not the highest model back then but that is comparing it to top end race models of the day. To build it into a daily urban commuter or a weekend bike for short forays into the wilderness without doubt its worth it.🙂👍🏼
@JogieGlenMait16
Жыл бұрын
I love everything except the shifter and rd.
@TheUndeadMechanic
Жыл бұрын
One of the best aspects of these frames is that they allow for such variation that they can be tailored to meet most individuals' needs. The friction shifter with this RD works perfectly well in this application. Super simple urban commuter with an emphasis on reliability. If the clients priority is more performance oriented, then the entire transmission will be assembled to suit with a higher gear count, trigger shifter, and a different gear ratio to match the application. What would your preference be?
@jameskenney8401
Жыл бұрын
Thanks for posting, very helpful. At 61, just getting in to building bicycles. Can you tell me the brand and model of the tires you are using?
@TheUndeadMechanic
Жыл бұрын
Thanks for watching. Cult is the brand, model I don't remember off hand.
@Nocturbulous
Жыл бұрын
The wheel model is "Waffle 26" by Cult x Vans"
@iuvius
Жыл бұрын
Great stuff! I’m planning to rebuild my old Marin bike too. What do you call the handlebars you used here? Thanksss
@TheUndeadMechanic
Жыл бұрын
Thanks.This is a new old stock alloy bar. I will be putting some up on the web shop soon. The link is in my description.
@robbcoolmeadowbrookinnmain6455
Жыл бұрын
I have to know what stem that is?
@TheUndeadMechanic
Жыл бұрын
It's an origin8 stem
@defx5311
Жыл бұрын
Hi what is the tyre size? And what brand?
@TheUndeadMechanic
Жыл бұрын
Cult 2.1
@varietyyachtsvessels6769
Жыл бұрын
Very Nice!
@TheUndeadMechanic
Жыл бұрын
🙏🏼
@alejo007
Жыл бұрын
Que hermosa Bicicleta MTB ,saludos desde Colombia
@TheUndeadMechanic
Жыл бұрын
👋🏼 Gracias
@JNAMOTORSPORTS
Жыл бұрын
What bars
@TheUndeadMechanic
Жыл бұрын
They are new old stock if you are interested get in touch with Gregario.atelier@gmail.com
Пікірлер: 43