Thank you so much! This is the first tutorial I have seen that shows how to replace the spring bars.
@CrispimSoares
6 жыл бұрын
The tape trick is phenomenal. You are the man!
@kevinkukreja1808
8 жыл бұрын
The watch you did is easier but on the newer models it's very tough if you can make a video on the newer ones would be very helpful Thanks
@peterchen956
6 ай бұрын
Thanks for providing the details on re-installing my bracelet! Took me a few times, but finally it worked.
@phamti
4 жыл бұрын
Thanks that was exactly what I need to put my bracelet back on mine.
@cahillgreg
2 жыл бұрын
Thanks for taking the time to do this - much appreciated.
@pgong
5 жыл бұрын
Nice Red Sub. I also have a 1970 Red like yours and your video will help me get my bracelet back on safely after my experimentation with NATO and leather straps. Thanks for posting.
@SuperCoyote02
8 жыл бұрын
Well executed video, really helped me. Greetings from Mexico.
@Kayn123
7 жыл бұрын
Thank you! I was making a dumb mistake and this cleared up how to properly get it on.
@SteelmoonWatches
4 жыл бұрын
Needed to watch this. I was having a right nightmare and didn’t want to continue and damage anything.
@alandnouri._4158
5 жыл бұрын
Thnx bro❤️ my Lil brother broke my Rolex amd I didn’t know how to fix it but now it’s fixed❤️
@thedoctorate
5 ай бұрын
Brilliant demonstration.
@delta2194
8 ай бұрын
Thank you for your video. Very helpful tip to re-install the bracelet.
@butao00
4 ай бұрын
Simply amazing, thank you so much for the tutorial!
@halarefaie8675
5 жыл бұрын
Thanks you! I fixed my watch in two seconds!!
@eliobruni
5 жыл бұрын
Thank for sharing, I got a Submariner like that one with no date and was a piece of cake.
@PauloRicck
5 жыл бұрын
Jesus, it certainly seems like Rolex doesn't want us to get this thing off.
@orlandonsumboitachisan2340
2 ай бұрын
Thank you very much, you saved me man🙂
@adisprint5596
6 жыл бұрын
Beautifully done. Thanks for the vid!
@danielsaudi9121
2 жыл бұрын
Good clear informative video.. Thanks from New York USA…..
@camarocarl7130
Жыл бұрын
Good technique Old Boy, well done indeed..
@parksoo-kim6908
10 ай бұрын
Perfect video. Thank you so much!
@justinvierra-sacramentocar5522
7 ай бұрын
brilliant!
@alecshafer9623
2 жыл бұрын
First video I watched where the method worked. Because the lugs on my Rolex and the end piece are so snug, the other videos I watched where they tell you to angle the end piece into the lugs didn’t help at all.
@mandolinut
4 ай бұрын
thank you
@MidnightHozz
2 жыл бұрын
I have a 16013 from like 1984 and I broke the spring pin trying to get the bracelet back on. It is a jubilee bracelet and not an oyster but the piece attaching the bracelet to the case looks identical. Also my case is beat to shit, I could barely make out the model number.
@maverickkoi6399
8 жыл бұрын
great tips for the tape. I will do it too
@drwallet1
8 жыл бұрын
Thanks, it does avoid those little scrape marks! :-)
@toniandclanck3138
4 жыл бұрын
Thanks a lot
@gernottemmel1259
Жыл бұрын
But you already scratched it when: 1st not hitting the hole several times and 2nd when pushing the spring bar through an pulling it simpy off, didn‘t you? 🤔
@thirdgear75
2 жыл бұрын
thanks for posting
@hwil09
Жыл бұрын
Thanks
@baronedipratorosolo
4 жыл бұрын
Grazie a te.
@danieleswing1648
4 жыл бұрын
Great video thanks
@wongmax4058
3 жыл бұрын
Very useful. Thank you
@marvoski547
4 жыл бұрын
Would you happen to know if an older model like datejust 16234 could fit the newer 116234 solid end link bracelet?
@virgin26
4 жыл бұрын
I took my strap off very easy but could not get it back on. wanted to know the year for valuation. going by the number its 1965 like yours without the date
@sleep7.5R
6 жыл бұрын
Hi! I just got a vintage Air King with a rolled-link oyster bracelet. The micro-adjustments on the clasp don’t allow me to make it small enough for my wrist. Do I have any options for resizing it? Thanks
@LuxJewelersLLC
7 жыл бұрын
Do u need to worry about the spring bar flying out when u give it that little tug ?
@vintagerolexcollector6334
7 жыл бұрын
Only if you do it on a very deep pile carpet or grass!!
@injuredtabletennisplayer1474
3 жыл бұрын
Cool
@SHARKBWOY13
Жыл бұрын
❤
@josephp2712
7 жыл бұрын
Been wondering for a long time if it is possible to replace the bracelet band of an invicta swiss made pro diver with its rolex equivalent would it work as long as they are both 20 mm
@vintagerolexcollector6334
7 жыл бұрын
I don't think so, it is the correct width but the end pieces need to be tight against the case otherwise it might not look great....?! Let me know if you ever try one please.
@benjaminter-berg5941
6 жыл бұрын
This video is good if you have no personality, you just replace it with a rolex and flex.
Пікірлер: 47