I added 1mm spacers under the inner rear arm mounts, per Mark's suggestion. Certainly helped and I can probably add another 1mm. Unfortunately, I ended up breaking a rear hub carrier on a bad landing at the end of the video, so that was it for the day on this car. I plan to assemble the alternate gearbox with a modern diff and use that going forward, but I'll have to see if I get the same clearance to be able to push the inner arm mounts up without the modern diff outdrives touching the arm mounts.
- Күн бұрын
Vintage Tamiya Dyna Storm at RCHR Open Practice, Part 2, 02/03/24
- Рет қаралды 247
Пікірлер: 5