You just have to love CowfarmerDans videos because he is very precise with his commentary.
@casto-
Жыл бұрын
Just Clarence to get it🙄😁👍 I think you two need to do a collaboration vid!
@graemebowyer4901
Жыл бұрын
Another excellent piece of work. Your commentary is what makes it.
@dougpeterson5257
Жыл бұрын
Very good video, encouraging us to do our own repairs. Thanks so much
@JonDingle
Жыл бұрын
That grease injector adapter is a thing of genius young man. Top tips, to advice and a top bit of kit invented with and for a purpose. Well done squire!
@johncarroll8891
Жыл бұрын
One of your best videos Dan keep them coming I like the repair vids you do
@barrymcdonald7089
Жыл бұрын
Really good video. The two tools manufactured on the lathe are brilliant.
@nickhill3362
Жыл бұрын
If had that problem I would definitely tackle it after watching this 👍Dan
@roberthiggins6401
Жыл бұрын
Dan. You're so good at filming and explaining the technical then in layman's terms.
@bobpaterson1845
Жыл бұрын
Another great interesting an informative video Dan👌
@paulthompson8467
Жыл бұрын
Class video Dan we got new seals and brakes on our 35 a few years ago our mechanic who has worked on MFs all his life made it look so simple that a brilliant tool for putting in the grease👍
@paulf2529
Жыл бұрын
A really useful and detailed video thanks Dan.
@multipower617
Жыл бұрын
Another great video, very interesting and informative and that is an excellent gadget to inject the grease
@masseyman6290
Жыл бұрын
Brilliant, informative video Dan 👍
@rogerquenault7207
Жыл бұрын
Great video as always Dan, the tool you made for greasing the bearing was genius, you should patent that and sell them.
@ianwallett7438
Жыл бұрын
Good video. I’ve got one of them dial gauges but I haven’t got a tractor. Damn!
@stevebrown2996
Жыл бұрын
First class job Dan ,very clear and informative. I’ll be heading for my lathe very soon !
@richardknott7280
Жыл бұрын
Great job Dan, I need to do the half shaft seals on my Grey/ Gold FE35 as oil is leaking out and has got into the brakes, great info regarding this job and the greasing tool was brilliant Thank you
@paulweston2326
Жыл бұрын
We always used to set end float so that half shafts just touch, if you turn one and the other one turns in the same direction then they are too tight, you then add shims so that when one turns the other one goes in reverse
@charleshart6992
Жыл бұрын
Excellent video Dan - great job!!
@texasdillo
11 ай бұрын
Just started doing a seal replacement on my Massey Ferguson. Even though I only understood half of the conversation, I learned enough to help me finish doing the job. Well done and thanks.
@kevinryan3475
Жыл бұрын
Very interesting video and good technology
@johnstewart6725
Жыл бұрын
Love watching your videos some very interesting learning tips thank you for sharing your experience with us
@roba4297
Жыл бұрын
Re greasing bearings, an alternative is to use the gadget originally intended for icing birthday and Christmas cakes using a plain narrow nozzle. I always found it quite successful. Not sure about the modern plastic ones, as I purloined my mother's 1950's metal gadget that withstood the pressure. (She did find out eventually, together with her old deep saucepan I used to heat pistons in, prior to fitting gudgeon pins).
@michaelconroy7445
Жыл бұрын
Well done dan great very interesting and helpful, Keep up the good work bud.
@bigdawg3364
8 ай бұрын
Using your video as a guide for our 135 1972 Made in England. Incredible machinery and Thank you sir for your videos!! Your garage looks more comfortable than ours in Canada Ha...
@IanFletcher1970
Жыл бұрын
Excellent and informative video Dan
@morrietk
Жыл бұрын
Another awesome video! Cheers!
@bilko5109
Жыл бұрын
Enjoyed that vid dan 1st class job
@allanlavallee7171
16 күн бұрын
Good video.. Just thought I would mention those grease needles are available in Canada at most auto parts stores.
@CowfarmerDan
16 күн бұрын
That's interesting, never seen one over here. It was quicker to make than go and buy one though!
@gordonbell1152
Жыл бұрын
I see brackets on the mudguards for a Clyde tilt cab
@williamlake6151
8 күн бұрын
Include to check the seal to the axle. Recently pulled one apart with seals that fit outside of seal yet it didn’t even touch the shaft. Rather important information. Think about it the gaskets are fine example.
@benwinstanley101
Ай бұрын
Great video thanks
@ericjohnson9080
4 күн бұрын
Thank you for these vintage Massey vids. I need to do this to my mf50. Where do you source the parts, gaskets, seals, and brake linings and hardware?
@CowfarmerDan
3 күн бұрын
I shop around. I get most bits online, but some from traders at shows.
@sianwarwick633
Жыл бұрын
You have to get in touch with someone who talks about tractor or mechanical repair , because your info is too 👌 to miss. I now know how to fix that thing
@benwinstanley101
Ай бұрын
Genius
@daily501
14 күн бұрын
Good video! Did you ever get round to filming a seal change on an older Fergie, got a continental TE20 so assuming its got the older style axle. Cheers.
@CowfarmerDan
10 күн бұрын
I do have a continental engined tractor to do, haven't done it yet though. Yes, it will be the older type axle.
@paulblatchford4234
Жыл бұрын
👍
@crimsonsunshine264
Жыл бұрын
Did you do an apprenticeship in ag engineering dan🤔
@CowfarmerDan
Жыл бұрын
No, just a self taught back yard bodger.
@scottjones6710
Жыл бұрын
In the process of doing my seal . On inspection there is a grease nipple so the wheel bearing can be greased at any time?
@5ryane
Жыл бұрын
You can purchase that grease needle here in the USA I bought one over 45 years ago it's pointed so you can place it in the ball of a zerk fitting all so.Gill
@deniselister8804
Жыл бұрын
You can’t set preload on bearings with gasket take gasket out put shims back in
@CowfarmerDan
Жыл бұрын
I see what you mean, but workshop manual shows gasket and the chap I learnt from used them too.
@Swimmer173
Жыл бұрын
What type of grease is used. Do you use any special type of grease on the bearings. Thanks.
@martinclayton2746
Жыл бұрын
If use oil can nose screw that end on the grease gun will that work😀
@deniselister8804
Жыл бұрын
You can’t set preload with gasket take out put shims back in
@jwmfarms
Жыл бұрын
You still need to change the outer seal. Even if the inner seal is bad, the oil can’t get by the outer seal if it’s doing it’s job!
@CowfarmerDan
Жыл бұрын
Very true. But just doing the inner is well within the capability of the average DIY mechanic without special tools.
@jwmfarms
Жыл бұрын
@@CowfarmerDan By the way, there are three different thicknesses of those shims; .004”, .016” and .021”.
@kenaston4220
Жыл бұрын
@@CowfarmerDan I guess the outer seal was leaking oil that had passed through the bearing. Changing just the inner seal does hold the oil back though and is less of a job than trying to replace the outer one too. This video gives me confidence that I could replace the inner seal, refitting that shrink ring wouldn't be possible for me!
@sianwarwick633
Жыл бұрын
I have mentioned your Vintage Thursdays vids on Edd China's latest vid in the comments , as he has not released many vids recently. Hope you get some more views or follows from there
@CowfarmerDan
Жыл бұрын
Thank you Sian.
@farmer7229
Жыл бұрын
do u know of a source for replacement axle studs or is it a trip to the breakers
@CowfarmerDan
Жыл бұрын
I'm not sure if they're available or not.
@roba4297
Жыл бұрын
Try Patrick Edwards tractor parts or Vintage Tractor parts
@farmer7229
Жыл бұрын
I see acron services vintage tractor parts has them on their website
@robertallen3441
Жыл бұрын
Sure any bolt / nut supplier could source them for you
Пікірлер: 62