Nice piece of workmanship. That would be real easy to set clearances for each shell.
@V8N8T
2 жыл бұрын
Thanks Paulman, it's not bad once you run it through and measure each bore you then know how much to adjust each cutter to really dial it in!:)
@bomberobus
Жыл бұрын
Maaaaan, now that’s a win for the little guys at a time when case prices have become disrespectfully stupid 😎 Great vid thanks for posting it
@V8N8T
Жыл бұрын
You betcha thanks for watching! And yes it's just plain rude the prices of case's!
@ShannonBailey-ol4lm
Жыл бұрын
Those holes on the front bushings. I do believe it’s to push it out. Turn the bolts in when you are ready to remove. And it should push it out of the block
@alfredbucket848
Жыл бұрын
Thank You for taking the time to do this video. Very informative and very helpful.
@V8N8T
Жыл бұрын
You betcha Alfred thanks for watching!
@FixinBugsNStuff
Жыл бұрын
Very cool. Are these tools still available?
@V8N8T
Жыл бұрын
@Fixin Bugs -N- Stuff there is one guy who makes a tool like this in walla walla Washington but they are pricey. I've bought all of mine on ebay they were made in the 60's or 70's
@franzintegos1988
10 ай бұрын
Hello from Vienna, thank you for posting that super well made video about line boring. This is the best Vid on the net and perfectly made....all main steps have been explained in great details and is of high value to all of us. You are a great teacher and we all can follow your path to our benefit. I have 10+ KDF engines - war engines from Kübelwagen and Schwimmwagen, witch I like to line bore and set it back to a good and usable standard. Can you possible help me in buying such a Porta tool somewhere ? I did a lot of investigation on the net but can not find one complete set. Good luck for your family and for you...specially your lovely son I have seen on the video !!! I also have a daughter 6 month old and I am super emotionally about such little wonders. Best regards Franz Rathkolb Vienna.
@V8N8T
10 ай бұрын
Thanks for the kind words Franz. Next time I come across one for sale I will let you know
@JeanMelim
2 жыл бұрын
Amazing video. Thanks
@V8N8T
2 жыл бұрын
You betcha thanks for watching
@VWJawbreaker
2 жыл бұрын
What a great video man, well done!
@V8N8T
2 жыл бұрын
Thank you very much!
@anthonyalvarez5798
2 күн бұрын
This is a great detailed video !! Super helpful as I'm learning to line boar my vw cases !! Thank you brother !! I have questions if u can contact me it would bee great !
@V8N8T
2 күн бұрын
@anthonyalvarez5798 thank you, I'd definitely find a junk case to practice with and dial in your cutters. You can message me here, Facebook or Instagram
@neilspooner8790
Жыл бұрын
Excellent video, well explained thank you. Just a thought.........would it not be better to have the cutting tools at 180 deg to each other so that you are not tending to bend the bar is it cuts/pushes against the bore of the bearing hole?
@V8N8T
Жыл бұрын
Thank you and thanks for watching. That is a good idea but during the video I just followed the instructions. It is cutting such a small amount in some fairly soft metal so I'm not sure how much pressure the bar sees as it's cutting. I'll have to try that out next time I use it and see if it makes a difference(the cutters I have on the bar now are set perfectly to second over) looks like I need to find a few more test cases :)
@rogerscott4497
2 жыл бұрын
The instructions on my bar recommend setting the cutters 180 out from each other.
@V8N8T
2 жыл бұрын
Interesting do you have later bar? I'm pretty sure even the truline bars are all in a row
@rogerscott4497
2 жыл бұрын
Thank you for a great video
@V8N8T
2 жыл бұрын
You bet thanks for watching and the comments
@FixinBugsNStuff
Жыл бұрын
Very good video! So informative. Are you able to send me the instructions for this?
@V8N8T
Жыл бұрын
Thank you and thanks for watching. Here's where I got the instructions from www.thesamba.com/vw/forum/viewtopic.php?p=10039110#10039110
@rogerscott4497
2 жыл бұрын
You should make a video doing the thrust cut as well. Thanks!!!!
@V8N8T
2 жыл бұрын
One of these days I will:)
@ShannonBailey-ol4lm
Жыл бұрын
The slide hammer. Does that have a brass or bronze bushing inside?
@AlbertoRodriguez-je9nb
6 ай бұрын
Hi there, by any chance do you know where I can get instructions operatons for that line boring tool, i have one that looks the same, and the cutters are within .003" off. Thanks
@V8N8T
6 ай бұрын
Thank you and thanks for watching. Here's where I got the instructions from www.thesamba.com/vw/forum/viewtopic.php?p=10039110#10039110
@rabidfarmer9765
2 жыл бұрын
well at least you have good sense to use a dialbore gauge to check the bores. Some people just use by 'feel' - LOL!
@V8N8T
2 жыл бұрын
Thanks:) good to use some "feel" with some bearing crush, glad I measured the bearings and bored the bearing saddles accordingly otherwise the #3 bearing wouldn't have much for crush if I bored it per the specs.
@anthonyalvarez5798
2 күн бұрын
I need the front bushing that goes in the crank end !! Do u happend to have one that u can sell to me ??let me know pls !
@V8N8T
2 күн бұрын
@anthonyalvarez5798 I might have one ill have to look thru my parts and see
@anthonyalvarez5798
Күн бұрын
Mine has alot of play it's worn out , everything else is good
@V8N8T
Күн бұрын
@anthonyalvarez5798 if you can take it to a machinist and have a bronze bushing put in it and reamed to size would be the best solution I have been wanting to do that to mine but haven't made the effort
@sydlewis1892
Жыл бұрын
Why don't you use metric since everyting on the motor is metric?? ??
@V8N8T
Жыл бұрын
All of my measuring tools are in imperial, also if I come across Metric measurements it is pretty easy to convert
@onlysilv
2 жыл бұрын
@15:59 my way of life
@V8N8T
2 жыл бұрын
🤘😄
@ShannonBailey-ol4lm
Жыл бұрын
Hi. Would it be possible to get a copy of those directions?
@ShannonBailey-ol4lm
Жыл бұрын
I am piecing together a couple of lots. And I am looking for directions
@V8N8T
Жыл бұрын
Here you are Shannon this is where I got them from www.thesamba.com/vw/forum/viewtopic.php?p=10039110#10039110
@ShannonBailey-ol4lm
Жыл бұрын
Thx. Much appreciated. Have you come accross instructions for the M99 mainliner. That’s the partial one I have so far Thx
@V8N8T
Жыл бұрын
@Shannon Bailey you betcha, I haven't but there might be some info on thesamba
@ShannonBailey-ol4lm
Жыл бұрын
Thx. Just joined yesterday
@jaredjohnston4726
Жыл бұрын
Do you still have the 3D printer file for the micrometer gauge?
@V8N8T
Жыл бұрын
I believe I do
@jaredjohnston4726
Жыл бұрын
@@V8N8T if you find it would you be willing to share it?
@V8N8T
Жыл бұрын
@@jaredjohnston4726 yes I would no problem, I've also had a request for a copy of my carb hat I'm going to try and upload them to a 3d printer app that's free to download cause I think the file might be too large for sending on email
@jaredjohnston4726
Жыл бұрын
@@V8N8T that would be amazing. I just bought a 3D printer so if you get them uploaded please share the link. Thank you so much!
@V8N8T
Жыл бұрын
@Jared Johnston you betcha ill let you know when they are up
@wernerpanchenko6542
10 ай бұрын
Why doesnt anyone make one any more that would be reasonable
@V8N8T
10 ай бұрын
I'm not sure but that sure would be nice!
@ManVsOven
Жыл бұрын
I can't find anyone in West North Carolina that does this any more... Maybe I should look on eBay to find the tool
@V8N8T
Жыл бұрын
That is where I found all the parts I have. The only person that makes them new is rocky Jennings out of Washington but they are about 2700 bucks!
@ManVsOven
Жыл бұрын
@@V8N8T yikes... a new super case was $1,000 a couple years ago, maybe I'll do that again. I called my shop in Florida, they said "not at this time", meaning, I think they have the tool, maybe they will sell it to me 🙂
@V8N8T
Жыл бұрын
@@ManVsOven yeah it's expensive I think that might be something that would pay itself off if you had a shop, I have about 600 into all the pieces I have. If you do a forum search on thesamba for porta tool there is a guy that has one for sale. The super cases have gone way up in price even a stock case is 1500 now
@V8N8T
Жыл бұрын
@Cory Siple there is a later style porta-tool line bar on ebay with cutters right now www.ebay.com/itm/304861943636?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CWZgWtiZTh2&sssrc=2349624&ssuid=9EMM8T60RH6&var=&widget_ver=artemis&media=COPY
@anthonyalvarez5798
Күн бұрын
I just got a complete tool like the one showed in the video I'm in Wake Forest NC but I need the front bushing that goes on the end of the case on the crank side ! Once I get it I'm going to bee doing line boaring ! Let's see how it goes
Пікірлер: 84