It’s very clear to see , the experience and your leadership shows
@busterbritt5404
6 ай бұрын
My Hero”s ! You Guys Rock !
@DaleWHickman
6 ай бұрын
Thanks Buster nice talking with you. Hope your wall turns out well. Send me some pictures as soon as it’s done maybe I’ll make a video on your project.
@busterbritt5404
6 ай бұрын
@@DaleWHickman Thank You Sir !!
@lb7wade518
Жыл бұрын
We need a relike button for those of use that watch several times!!
@MB12116
Жыл бұрын
That pontoon but looks sick. Could you do a tour of some of your equipment?
@lb7wade518
Жыл бұрын
Beautiful work!!
@darinjuliesims354
Жыл бұрын
This video was really good. Great job on everything.
@PauloSergio-eo2ws
2 ай бұрын
Great job! I'm looking to get something similar to that done on my backyard
@DaleWHickman
2 ай бұрын
Thanks for your comment. I appreciate that and watch my channel. Good luck on your project.
@PauloSergio-eo2ws
2 ай бұрын
@@DaleWHickman do you guys do out of state work? I'm in SC
@AndyB718
3 ай бұрын
Good quality work 👌
@DaleWHickman
3 ай бұрын
Thanks for your comment and watching Andy I appreciate it!
@chriscassels8325
7 ай бұрын
Very good video. Thanks.
@DaleWHickman
6 ай бұрын
Glad you liked it!
@DreamCatcherChartersKeyWest
Жыл бұрын
Impressive.
@DaleWHickman
Жыл бұрын
Thank you so much for taking your time to comment!
@rodolfogonzalez6777
Жыл бұрын
Perfect !!!!!!!!!
@DaleWHickman
2 ай бұрын
Thanks
@ncangler2067
Жыл бұрын
Hey Dale, love the videos. What kind of vibratory hammer do you use?
@DaleWHickman
Жыл бұрын
Thanks for your comment. I believe one of them is called a MPK but can’t swear to it and the other one is just a cat plate compactor.
@user-zb7tg5hi3t
8 ай бұрын
Great job!!
@DaleWHickman
8 ай бұрын
Thank you!😊
@matthewmcquillen8666
Жыл бұрын
What is the clamp you are using to pull the sheets out? Thanks for the videos.
@rodd8125
Жыл бұрын
Hey Dale, love your videos. I own and maintain a small marina in South Louisiana, most of our work is for ourselves so we are not pros by any means. We seem to have trouble getting pilings on layout in deeper water especially with current rolling. Any tips?
@DaleWHickman
Жыл бұрын
Hey Rod, thanks for your comment and watching the videos. We have the intercoastal waterway here where it gets narrow, and we deal with the same issues. Sometimes we will tie a rope mid span of the piling why we are trying to stand it up to hold it close to the place it needs to go. On top of that we always have a lot of limestone in that area. We have to go through so it makes it very challenging. Good luck with your projects.
@JamesBaker-v4w
2 ай бұрын
I used to do the same shit and we wore flip flops. our shirt had a chainsaw with a pair of flip flops on it. This is maritime industry not general industry and osha regulations are different
@DaleWHickman
2 ай бұрын
Make sure watch my channel and your comment yeah some of my guys would wear flip-flops. If I let them we try to at least protect our feet.
@benwillams8406
Жыл бұрын
What is that sock drain down at the 6’ level? Does that tie into your weeps?
@DaleWHickman
Жыл бұрын
Thanks for your comment Ben I have the inch and a half pipes joint in to the 6 inch sock drain to help relieve the water pressure from behind the seawall
@forrestc21
Жыл бұрын
I noticed the weep hole in the wall at 10:05. After the wall is complete, is this weep hole above or below the waterline?
@DaleWHickman
Жыл бұрын
Thanks for checking on my page. I typically try to keep the weep holes a a foot and a half to 2 foot above the high tide line, so I’m not letting Water get back behind the wall. The waterline you see on the vinyl is from us, jetting behind the wall and had trap some water on the backside. Good eye!!
@Mark-b4b3h
7 ай бұрын
Where are you located need an estimate ?
@DaleWHickman
6 ай бұрын
Thank you for your comment and Question we are located in Gulf Breeze Florida and only work 50 miles within this area.
@paulbetka2966
Жыл бұрын
. 💪🏻💪🏻💪🏻👍🏻👍🏻🇺🇲
@lb7wade518
Жыл бұрын
No wonder it failed!! In the ground 3 feet if that
@somethingidk3385
Жыл бұрын
FAILURE TO ADMINISTER PPE
@DaleWHickman
Ай бұрын
Thanks for your comment. My Worker’s Comp. rate is one of the lowest in the industry. We take pride and trying to keep all our guys safe with no injuries. We tried to be as safe as we can, but there is just sometimes we push the edge
@PaulJHershey1
Жыл бұрын
HARD HATS...not worn when working on a construction site? Really? Your other videos had guys wearing hard hats... so what changed here? Your crew, yourself, appear competent, very capable... but accidents happen.
@darinjuliesims354
Жыл бұрын
Stick to the seawall/dock questions Paul. Don't be that guy!
@mitchmckenzie2459
3 ай бұрын
Boots required boss. “Watch for snakes”loses the lawsuit. Boots required with ankle protection and steel toes.
@DaleWHickman
3 ай бұрын
Thank you for watching my channel and you were comment. I definitely understand the boots thing but when you fall in the deepwater with boots on and steel toe shoes and makes a very difficult to swim. The athlete developed from wearing wet boots all day long is not fun, we tried to implement them where we can but there’s just times you cannot. Keep on watching thank you.
@JamesBaker-v4w
2 ай бұрын
Dale is subject to maritime OSHA regulations that are different from general industry requirements.
Пікірлер: 43