Thank you so much for doing this video!!! I am new to this and working myself to death with using spray paint and so im switching to vinyl wraps and waterslides I already do the hydro dip but you’ve been the most informative on how to do all of this!!!! I love your video 😊
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
You are very welcome and thank you for watching! 😊
@sallymcgarrah938
2 жыл бұрын
@@ItsACraftThingAlishaVirgillo your welcome!!!! I also definitely subscribed!!!!
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
@@sallymcgarrah938 awesome! Ty so much.
@MysticMerGirl
Жыл бұрын
These were great! Thanks so much! Your instructions were on point, precise & very easy. Sorry I didn’t find you sooner 😊
@ItsACraftThingAlishaVirgillo
Жыл бұрын
Thank you so much for watching. I have a ton more videos. Hope you subscribed as well 😊
@joycepugh5347
2 жыл бұрын
Water slide you can put on like a tattoo - just mirrors your image - & put water on pen or what ever your putting your image on - very nice😊
@ItsACraftThingAlishaVirgillo
Жыл бұрын
Thank you!
@georgialewis4046
2 жыл бұрын
absolutely love the sunflower pen! Great job!
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
Thank you 😊
@dianesevilla8633
3 жыл бұрын
I just love watching you create all these beautiful items.
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Thank you! 😊
@barbboyd4382
3 жыл бұрын
If you use mirror before printing your water slide (for the name) ,then you can lay it face down on your pen or surface and slide the back paper off. It works better for me this way.
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
I think I saw someone do that before. I'm going to have to try that. Thank you 😊
@monicalivery
2 жыл бұрын
Niceeeeee
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
Ty 😊
@dianagrimont1630
2 жыл бұрын
Great tutorial thank you I want to try hydro dip
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
Your welcome. I love to hydro dip. The results are unpredictable and beautiful. 😊
@loramillet6626
3 жыл бұрын
Beautiful! Do you need to coat it with mod podge after dipping it in marabu inks and before epoxying?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Nope. I went right in to epoxy.
@loramillet6626
3 жыл бұрын
@@ItsACraftThingAlishaVirgillo Thanks!
@gingeranderson4458
3 жыл бұрын
They are so pretty, did you make the waterslide the same size as the printable vinyl rap
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Thank you. I made it a tad shorter so the image didn't over lap.
@juliasnider5905
3 жыл бұрын
New at this and loved watching your video! Learned more here than watching others. I have a question, I have problems with my lungs and was wondering if I could use Crystalac Brite tone instead of Epoxy to seal the vinyl wrap pens? Thank you!
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Welcome! So glad it helped. 😊
@kimberlygoldman1064
3 жыл бұрын
Thank you for the awesome video! I just found you and I’m so glad I did! I’m VERY new to all of this and your tutorials are wonderful!! Where did you get your top? LOVE IT 🥰
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
You are very welcome and thank you! If you mean my "Bad Mom" top, I made it. 😂😊
@kimberlygoldman1064
3 жыл бұрын
@@ItsACraftThingAlishaVirgillo I Love it!!! I need one of those in my life lol
@angietheriault7052
2 жыл бұрын
Can you use nail polish instead of the marble drops
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
Yes.
@amandalee6202
2 жыл бұрын
How long does it generally take the epoxy to dry? How many coats of epoxy do you put on the printable vinyl and waterslides?
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
Dry times vary depending on the epoxy you are using and the temperatures in your craft space. A lot of epoxy is dry to the touch in about 8 to 12 hours. There are quick cure epoxies that dry to the touch anywhere from 2 to 6 hours. I always put 2 coats of epoxy over any of my projects whether it is glitter, vinyl or waterslides and no matter what epoxy I am using.
@denareynolds796
2 жыл бұрын
What type of cricut do you have to do the printable vinyl?
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
I print with a HP Envy Photo printer and I use the Cricut/Explore Air to cut my vinyl.
@monicaarismendez2060
3 жыл бұрын
Great video..do you seal the waterslides?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Thx Monica. Nope. I just epoxy right over the water slides.
@ericavivas1387
3 жыл бұрын
What size do you cut your vinyl?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
6 minutes into the video I show you in design space the height and width sizes.
@brookesisson5466
2 жыл бұрын
Where did you find your weeding tool!? I have been looking everywhere for one like that
@ItsACraftThingAlishaVirgillo
2 жыл бұрын
I kind of made it. You can check out my tutorial kzitem.info/news/bejne/raGImHaEbpOIe4I. I purchased the actual too from Ante Up Graphic Supply. Which I just looked and they are out of stock right now. anteupgraphicsupply.com/curved-weeding-tool/
@tanyatucker2
3 жыл бұрын
for the vinyl wrap, do you have to epoxy the pen first?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Nope. I don't even sand it. Easy peasy.,
@brandiboles13
3 жыл бұрын
When you Hydro drip - are you doing a coat of epoxy before you dip?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
No. Just sanded and spray painted.
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Hi Brandi.,No. I just dip right over the spray paint.
@brittneyreanae6543
3 жыл бұрын
My vinyl wrap isn't exactly flush towards both ends. What is the trick here?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Does it over lap?
@brittneyreanae6543
3 жыл бұрын
@@ItsACraftThingAlishaVirgillo yes it does slightly.
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
@@brittneyreanae6543 oh wait, you mean at each end you can see a little bit of the pen? If that is the case, you want that so the epoxy seals the vinyl to the pen.
@shawnminarik4936
3 жыл бұрын
Do you use the matte or gloss printable vinyl?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
For this project I used Matte.
@sallypoultney4331
3 жыл бұрын
Where can you purchase refills for the pens and the name?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
So Amazon has ink refills but they are not by paper mate. I'm going to buy them to see if they fit. I will keep you all posted.
@revameadows2211
3 жыл бұрын
What do you use to plug the pen while you epoxy
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
Hi Reva. I use a q-tip wrapped with painters tape.
@revameadows2211
3 жыл бұрын
@@ItsACraftThingAlishaVirgillo thank you
@ericavivas1387
3 жыл бұрын
What kinda paint do you use for hydro dip?
@ItsACraftThingAlishaVirgillo
3 жыл бұрын
The base was Rustoleum 2x Matte white and metallic gold spray paint. The paint in the bucket is Maribu Easy Marble.
@CrystalWilliams-rt3zm
3 жыл бұрын
What are you using to plug the ends of your pens?
@revameadows2211
3 жыл бұрын
Following for the same question
@ItsACraftThingAlishaVirgillo
Жыл бұрын
You can use anything silicone. I used toothpicks wrapped with painters tape.
Пікірлер: 61