finally an official tutorial from MT for chr in proxmox. Thank you!
Жыл бұрын
Already using CHR on proxmox for 3 years. Great way to teach students with minimum hardware requirements. But at some point I need hardware, to show what the setup looks like in real life.
@wolfpoker
Жыл бұрын
Just FYI if you had a dedicated channel with similar videos I'd watch religiously. Damn good job on the overall video production.
@wolfpoker
Жыл бұрын
P.S. Mikrotik you know I love you, I'm just saying I really enjoyed this.
@JasonsLabVideos
Жыл бұрын
NICE !! Lots of people are going to love this !! good work !
@saschaschwegelbauer1764
4 ай бұрын
Great video! I'm using MT hardware for many years and now on the way moving away from ESX to Proxmox.
@carlosescobar5995
Жыл бұрын
Loving this Proxmox series, that's what we use at work (cloud provider), Proxmox + Mikrotik, solid pair, high performance
@ClayBellBrews
6 ай бұрын
Wow, very very nice. Great rundown of the issues. Great explanations, and really succinct.
@SY1337
Жыл бұрын
I recommend adding a single vlan-aware bridge instead of creating individual bridges per vlan as shown in 06:54. Saves you alot of time.
@nabarnes
Жыл бұрын
Doesn't work if your VLAN traffic needs to have a different MTU though...
@PhilippHaussleiter
Жыл бұрын
Great tutorial! Some things to mention: 1. A VM without a proper boot device should fallback to Netboot and can be close via the shutdown option 2. You can apply the updated network config with the button "Apply configuration" without rebooting the node. Can you do a tutorial with proxmox using the CCR2004-1G-2XS-PCIe? That would be awesome.
@RB01-lite
Жыл бұрын
1. The shutdown button does not trigger before a reboot is initiated. 2. Might be a valid rookie mistake :)
@mithubopensourcelab482
Жыл бұрын
@@RB01-lite Stop command works. The format is qm stop vm#
@SimmanGodz
Жыл бұрын
Excellent and clear walk through and explanation!
@sebastiankutter3630
Жыл бұрын
Awesome video. Can you make a second video where you integrate CHR with the experimental SDN Feature in proxmox?
@ABUNDANCEandBEYONDATHLETE
Жыл бұрын
Yes!!!!! Thanks!
@Jorvs
Жыл бұрын
Been waiting for this
@mithubopensourcelab482
Жыл бұрын
If you install ifupdown2 command, no need to reboot Proxmox anytime just for change in network configuration.
@SJGsysadmin
Жыл бұрын
Spooky 👻. Was literally just talking about swapping a VyOS for CHR when you published this
@sidewinder7602
Жыл бұрын
What would be your reason to switch from VyOS to CHR? :)
@SJGsysadmin
Жыл бұрын
@@sidewinder7602 we're hitting jitter and latency issues we can't explain in vyos on proxmox and want to start rulling out components
@jonpinkley2844
Жыл бұрын
Suggestion for MikroTip. How to use Partitions. To be clear, I mean multiple ROS "boot" partitions in NAND flash; what is done with /partitions command. The documentation doesn't even discuss what the /partition/activate command; there is no mention of it at all.
@materangics6984
8 ай бұрын
Would be great to do an export of this proxmox VM and just post it to your website. Otherwise great. :)
@AlexPlast
Жыл бұрын
Installed the latest Proxmox 7.4 and CHR 7.9. The guest agent is not running. How to fix it? In the Proxmox interface, information about the guest agent: Guest Agent not running. I do: qm agent 3000 ping I get the result: QEMU guest agent is not running In Proxmox 6.4, the guest agent works.
@maksikgregory4988
Жыл бұрын
спасибо!
@maxsafronov_ca
Жыл бұрын
I've got ERROR: unknown command 'qm disk'. This command 'qm importdisk 113 chr-7.8.img local-lvm' works for me
@RB01-lite
Жыл бұрын
'importdisk' is an alias for 'disk import', there is no reason why only one would work.
@maxsafronov_ca
Жыл бұрын
@@RB01-lite We have outdated Virtual Environment 6.4-4 that's probably why 'qm disk import' doesn't work
@naellilik
Жыл бұрын
doing pastrough PCI express. it will more faster networking.
@sidewinder7602
Жыл бұрын
Doing this in production for some BRAS/BNG using 10G adapters, pushing 8G+ concurrent traffic with 2000+ PPPoE subs ;-)
@RB01-lite
Жыл бұрын
@@sidewinder7602 What specs you got on that host?
@sidewinder7602
Жыл бұрын
@@RB01-lite ASRock Rack X470D4U, Ryzen 9 5950X, 64G ECC RAM, 2x 1TiB NVMe storage, 2x X520-DA2 10G. But also have Intel i9 and XEON based boxes (Intel is preferred for network appliances). Mind you; it's not common practice to virtualize BNGs due to extra overhead, the deployment was a PoC to compare VyOS, ROSv6 and ROSv7. The above-mentioned BNG is running ROSv7 since v7.1 :)
@RB01-lite
Жыл бұрын
@@sidewinder7602 Nice rig. Did you compare performance with a regular bridge setup?
@masterpablo
Жыл бұрын
@@sidewinder7602 I have a problem with CHR ROSv7 using PCI-Passthrough and i cant pass more than 1.6 GB/s. I use a HPProliant DL580 gen8. Network card is Broadcomm BCM57810S that is PCIe 2.0. X8. I dont know that could be the problem. without PCI-PASSTHroug i cant pass more than 500 MB/s. I need to pass more than 4 GB/s
@green-media-pl
Жыл бұрын
Is it possible to add commands to the description of the film?
@jiucaibox
Жыл бұрын
Convert to template that is really inspired
@ronaldrobles5597
Жыл бұрын
Hello, because in version 7 of routeros the CPU increases drastically
@lucim101
9 ай бұрын
Hi , I am using a Dell Poweredge Server is there much of a difference using Proxmox network bridges and PCIe Passthrough, is it recommended to passthrough ?
@jonpinkley2844
Жыл бұрын
Interesting ESD precautions at 1:07 🤔 Was that an RMA return?
@ivanovivan1151
Жыл бұрын
hello, how to pass connection status from passthrow pci NIC to VM? When I passthrow NIC into CHR VM all interfaces are running, even the cable does not connected to them. Proxmox 7.4 + CHR 7.8 (host on CPU N5105 G30)
@RB01-lite
Жыл бұрын
That is a peculiarity with QEMU/KVM where the interface status is always running, the only way around that would be to do a PCIe passthrough for your network card.
@eliotwilk
Жыл бұрын
Hi please create tutorial about passtrough pci nic card to mikrotik CHR
@gsi87
Жыл бұрын
есть ли у Микротик в планах CHR для gen2 HyperV?
@piotr424
11 ай бұрын
qm disk import 200 chr-6.49.8.img local-lvm storage 'local-lvm' does not exist.
@asloz1276
10 ай бұрын
I got it! Very easy. Is it necessary to register CHR free ? Will it work forever free? *I use for dude.
@mikrotik
10 ай бұрын
Free trial works forever but software upgrade will become disabled
@Piotr_T
15 күн бұрын
Hello. I'm wondering what licence level is default in this virtual appliance?
@mikrotik
15 күн бұрын
CHR comes with a free license limited to 1mbit/s. You can also apply a 60-day trial license, thus removing the speed limit.
@m-electronics5977
3 ай бұрын
8:56 something isn't correct with your colors😅 Why in the proxmox all green items / symbols are black and now the ROS console looks also strange? 🤔
@mikrotik
3 ай бұрын
There was a little mishap with the recording software :)
@m-electronics5977
3 ай бұрын
@@mikrotik ah ok
@mithubopensourcelab482
Жыл бұрын
Proxmox running on DHCP is not even recommended . They why show how to twist configuration to run with DHCP address ?
Пікірлер: 56