I tried this knife in store. I didn't like the unlocking method (personally) but it did seem very strong. This knife is really awesome looking but the square edges of the g10 really suck. White g10 is cool because you can easily customise it by dying the scales. I prefer 14c28n or nitro V steel to the pretty damascus. I chose the Civivi / Ray Laconico sakoke - Better steel, better ergo, not as good blade shape, traditional locking method (front flip is awesome)
@BladeLabMiami
20 күн бұрын
I like them both, but you definitely picked a winner with the Sokoke.
@1ohmwrecker
9 күн бұрын
My knife journey started w the cjrb pyrite light. Made me buy that pyrite bowie a week later. Got a kizer amicus. Plus a few ganzo and firebirds. Been really really looking at this one. It'll be the most expensive knife I've bought yet. My bowie was like $55. Thank you for this video! 🫡
@BladeLabMiami
9 күн бұрын
Yes indeed, the knife hobby is a slippery slope. I think you'll really like the Vision if you take the leap.
@danr8787
7 ай бұрын
I’ve been carrying the demascus version as an EDC for the last month. I use it daily at work for boxes mostly. Ot does scratch/scuff up pretty easily. I don’t mind as I don’t use mine as a show piece. Had to upgrade the clip after it bent. Got a Kiezer titanium clip. All in all happy with the purchase.
@BladeLabMiami
7 ай бұрын
Yep, as long as you're not overly concerned about the appearance, I think the extra performance is worth the relatively small price bump.
@AggroSamurai
7 ай бұрын
Great video. Ive been trying to find every reason to not get a Vision FG in Damascus so when i saw the blemish on the blade from 1 cardboard box i felt pretty good. Then the cut test results came and im back to square 1 😅
@TerminalM193
5 ай бұрын
I have the black micarta scales version of this knife. The Damascus steel on mine looks very different from yours as well. I have maybe half the folds as you do. Been carrying for a week now and use it daily. Still hair shaving sharp.
@BladeLabMiami
5 ай бұрын
It looks like Civivi changed their Damascus in recent runs. Maybe I wasn't the only one complaining about the durability of the finish.
@SpartanJohns
7 ай бұрын
definitely useful for me. more the review in this case because i am looking at the FG but the Nitro-V version. Using the Baby Banter I found that I really like Nitro-V for a beater knife. I dropped it to 12-13 dps and it can be easily sharpened just with a few passes on a strop. I have yet to test how stable it is a lower edge angles. I sharpened 12C27 at 8 dps and for controlled cuts it does ok. If Nitro-V does the same or a bit better I would be happy with it.
@twissted1277
6 ай бұрын
I have this and the black and yellow one and ordered the limited carbon fiber scales and s35vn steel blade.
@clintonbrooks3611
7 ай бұрын
Speaking on the Vision FG and Amirite damascus, its underwhelming overall, but for a "budget damascus" im not really mad. Its really All Show and Low Go. 💯
@eskee1
6 ай бұрын
I purchased this same knife... Looks cool and is fun to open and close with a very satisfying click and seemingly strong lock but the blade steel is... trash trash trash it came hair popping sharp and after making just 1 pass through notebook paper (1 sheet) it could no longer cut any hair and needed stropping to get the edge keen again which after a few passses it was back to being sharp and after that i just put it in my nightstand and use my chinese demko 20.5 clone for around the house and as an extra edc to compliment a nicer piece
@monkpato
7 ай бұрын
It's not just exposure to the air. Steel wants to return to it's shape, so after stropping it often becomes duller just by sitting there a while.
@monkpato
7 ай бұрын
If you are going to test it, try stropping and then putting it in oil to see whether it's oxidation or not
@BladeLabMiami
7 ай бұрын
That had occurred to me.
@slvrnblu
7 ай бұрын
That's not at all true, steel doesn't have a memory like that. It's elastic but it returns immediately to it's shape except were it had yielded. There is creep, which will have steel change shape over time, but it is a response to continuous strain and doesn't apply here. An edge can dull on its own, but it is microscopic corrosion on the edge apex that will do it and it shouldn't be appreciable in a stainless steel.
@EDCandLace
7 ай бұрын
I have one at the machine shop now, they are doing a pmi test on it for me and gonna poke it for hardness. I'm really curious as to what the core is. Kinda betting on 9cr as in Two cut test between a paraxis and the San Mai fg the test was called within 2% on test one and 3% on test two.
@BladeLabMiami
7 ай бұрын
Cool, I'd love to know what they find. I originally thought it was 9cr because that's what Civivi has used on their regular Damascus.
@monkpato
7 ай бұрын
I'd be interested in hearing what you find out also. Make sure and update us.
@sloanNYC
6 ай бұрын
Civivi states "Damascus is compound by 10Cr15CoMov in core with 316 and 5Cr15Mov in layers" for this knife.
@monkpato
6 ай бұрын
@@sloanNYC cool, thanks!
@CorruptionManX
Ай бұрын
Tired of people on KZitem who say something that is of public interest and then, in almost 100% of cases, don't come back to update it. I knew this would be another one of those cases.
Пікірлер: 23