😂🤣😂 Love the intro! That’s like a re-enactment of me taking a delivery in my house.
@dramjet7
4 жыл бұрын
Nice one Wooly. Flew mine the other day, kit build up also. Nice!
@RyanStille
4 жыл бұрын
This was a great review of the unboxing and assembly, thank you.
@S700KYFPV
4 жыл бұрын
Hilarious start, loved the video 👻
@AlainNLDB
3 жыл бұрын
haha, best intro ever! and sooo recognizable :-)
@curtmartini66
Жыл бұрын
"Nobody...just leaflets. "😅😅😅
@superdon1chw
Жыл бұрын
I just rebody mine it came down hard , cheap receiver ! New body 60.00 from China took about a month I love this one. 1300 Venom battery, I have battery all they way in the nose good CG I got bigger tires for better ground taxi
@TWSreviews
Жыл бұрын
I did strengthen the under carriage with lightweight carbon ones. If you were in the UK, HobbyRC sell them. The model flies like a larger model as long as not too windy. You have reminded me, I need to set it up on my new transmitter. All work, no play at the moment........happy flying. Jon
@JB73691
3 жыл бұрын
Hi there, did you fly it ? How was it ? Thanks. JB
@TWSreviews
3 жыл бұрын
Yes....fly it slow and acrobatic and handles really well.... Se my video: kzitem.info/news/bejne/q3iI1oN8bZ9enn4
@JB73691
3 жыл бұрын
@@TWSreviews Great, I just purchased one , will see your flight video. Thank you. JB
@tahreemfatima1741
3 жыл бұрын
it's an awsome plane
@TWSreviews
3 жыл бұрын
Oddly enough I flew it today.......I love flying it
@andrewmagro7703
4 жыл бұрын
gday there i bought one of these a few months back and found i needed extra weight in the nose only using a 1300mha 3S and that little wingy thingy i took it off as it was acting like another horizontal stab was interfeering with my flying and flew heaps better with out it thats my personal oppinion and also dosent need much throws as its very very responsive and otherwise flies great for a cheap 3D introduction model.
@TWSreviews
4 жыл бұрын
Andrew Reece thanks for that. Was the marked CG good or needed to be more nose heavy
@andrewmagro7703
4 жыл бұрын
Team Wooly Sheep Reviews for me needed much more nose weight which I put in the underneath front of the canopy and added a plug with strong magnets I put small bullet type fishing sinker which sat in nicely the added weight made it fly really well I couldn’t believe how much better I could trim it out for level flight once I removed that horizontal wing thingo as before kept flying in the direction it was last put in and didn’t want to level other than the weight it n the nose area and that horizontal piece turned out to be a great little performing 3D model and didn’t need big throws as I thought it might only half of all was more than enough all round and lastly batt is hard up against motor using 1300 nanotech turnigy 3S balanced to the cg that is marked underneath, cheers hope this helps - spats are useless on grass btw lol
@TWSreviews
4 жыл бұрын
@@andrewmagro7703 Thanks for the help....appreciated
@derbastelopabaut1355
Жыл бұрын
Ich fliege meine mit 3S 1300mAh plus 50g Blei. Top.
@tobiasbennett1576
4 жыл бұрын
You make a good video and review, many thanks .
@robertgribbin6444
Ай бұрын
Lol😂 thats me!!
@trevorc6793
4 жыл бұрын
Haha! tickled me @11:41, you're right, nothing wrong with short n fat. I call it compact :)
@mahendrakalra9281
4 жыл бұрын
Nice plane
@gtrman9706
4 жыл бұрын
Love it.🤣😂
@SunnySunny-wj3li
Жыл бұрын
Hello, I want to buy Volantex RC Saber 920 4 Channel Airplane with 3S Power System and Perfect Size for 3D Aerobatics 756-2 PNP. Is FlySky FS-i6X i6X 10CH 2.4GHz AFHDS 2A RC Radio Transmitter With FS-iA10B Receiver compatible with this plane? Does the FlySky FS-i6X i6X 10CH have all the functions I need to pair with the plane and make all the potential moves this plane can perform? I don't have any knowledge about planes/transmitters/receivers so I want to be sure. Your advise is valuable. Thank you
@TWSreviews
Жыл бұрын
The FlySky radio is a nice little radio that is more than capable of being configured to control planes, drones etc. Not the easiest of radios I have come across for programming but can do everything you need with the help of KZitem. You will only need a compatible 4 channel receiver, Throttle, Ailerons, Elevator and Rudder. Do set up a switch so that you can configure the channel rates high and low. Start off with low rates and don't fly too fast as it performs better at slow speed. If you don't fly planes this may not be a good plane to start off with. You could get one of these www.hobbyrc.co.uk/volantexrc-ranger-600mm-glider-rtf or www.hobbyrc.co.uk/volantexrc-ranger-1600mm-fpv-plane-pnp The prop is out of the way and glide well, can be thrown around and forgiving with heavy landings.😃
@SunnySunny-wj3li
Жыл бұрын
@@TWSreviews Thank you for your quick and analytical response 🙂 You got me, I m completely newbie on rc plane. My only experience is an Eachine Mini Mustang P-51D EPP 400mm. Your answer confused me, probably because I have no knowledge. If I understand correctly, apart from FlySky FS-i6X i6X 10CH 2.4GHz AFHDS 2A RC Radio Transmitter With FS-iA10B Receiver, you said I will also need a compatible 4 channel receiver, Throttle, Ailerons, Elevator and Rudder? If so, is too complicated for me, I thought it would be simple. The gliders you proposed me, look very attractive, but I was thinking of acrobatic tricks 😀 Although the gliders imagine beautiful on a windy day standing still on air like albatross birds 🛶 The 1600mm is too tricky for me to assemble, the 600mm rtf could match my league. Would you know if I can fit the RunCam 2 4K Edition HD Recording 155 Degree Wide Angle on the 600mm ranger plane? 66mm(L) * 38mm(W) * 21mm(H). The main question, is this 600mm ranger a real glider? I mean will it ''stay still'' on air? If not, the mini mustang I have has similar technical features.
@TWSreviews
Жыл бұрын
@@SunnySunny-wj3li You can throw them around. They are not floaty gliders and with the pusher motor style the prop is out of harms way from crashes. If you fit a camera get it on the centre of gravity point or adjust the battery position to keep good balance.
@SunnySunny-wj3li
Жыл бұрын
@@TWSreviews Many thanks 🙂
@jasonleesuffolk
3 жыл бұрын
Do you know where i can buy a spare motor shaft adapter for it,cant see them on banggood or other sites ?
@TWSreviews
3 жыл бұрын
HobbyKing should have them
@TWSreviews
3 жыл бұрын
I am using this motor and fount it perfect: www.banggood.com/EMAX-GT2215-09-1180KV-Outrunner-Brushless-Motor-For-RC-Models-p-1052362.html?rmmds=myorder&cur_warehouse=CN
@alone-nr9wg
4 жыл бұрын
😄👍
@CitadelPhotography
3 жыл бұрын
Is a 65c 3s battery overkill? Would a 30c be ok?
@TWSreviews
3 жыл бұрын
Yes…. It is overkill but what I had. 30C would be great. I picked up some 20c 3S 2200mAh that fit well also and last for ages.
@phucgiarc3651
2 жыл бұрын
Do you think that 4s 1550 battery will fit to the battery tray ?
@TWSreviews
2 жыл бұрын
You can make it fit. Especially if it is 30C. If it is a 100c fat racing quad battery maybe not
@phucgiarc3651
2 жыл бұрын
@@TWSreviews thanks, but my battery is 75c, quite hard to fit :((
@TWSreviews
2 жыл бұрын
@@phucgiarc3651 You could adapt the plane to make it fit but you will see the battery and make sure the centre of gravity is maintained. This plane should really be light and aerobatic so a lighter battery would be preferred.....
@phucgiarc3651
2 жыл бұрын
@@TWSreviews ok, thank you so much
@I_am_archie
3 жыл бұрын
👏👏 BRAVO! 👏👏👏 BRAVO👏👏👏 Hopefully my expected package arrives tomorrow while my wife is out. LOL 😆 How have you liked this Volantex craft?
@TWSreviews
3 жыл бұрын
It looks great and the quality is better than I expected. Fly it slow and fully 3D capable. I liked it so much I bought a spare. A great model for learning and practicing aerobatics. But fly it slow, pulse the throttle and you will be impressed. For the price it is one of the best in my opinion.
@I_am_archie
3 жыл бұрын
@@TWSreviews Copy, thanks for your reply. Looks like the spare bedroom is getting smaller,.... Again.
@TWSreviews
3 жыл бұрын
@@I_am_archie hid them in the loft......lol
@ChadBennettSr
3 жыл бұрын
video flaw....the Saber is visible in the background of the first shot...
@TWSreviews
3 жыл бұрын
lol.....doh!
@TomSmithFPV
4 жыл бұрын
Hahaha Brilliant!
@markhowe5529
3 жыл бұрын
Hilarious !!!!
@markl5338
4 жыл бұрын
yep..like this straight away,still laughing..............
@janicebradbeer9874
4 жыл бұрын
Jon didn't you have enough for Christmas??? 🤣🤣🤣
@TWSreviews
4 жыл бұрын
It was my Christmas present from me....lol
@derbastelopabaut1355
Жыл бұрын
Das aufbringen der Stick/ Folien meiner PNP Version: Absoluter Mist, der pure Wahnsinn. Meine Folien waren total zerknittert im Karton, Modell von Arkai. Aber das....wird hier natürlich nicht gezeigt.
@TWSreviews
Жыл бұрын
Es tut mir leid, dass Sie eine schlechte Erfahrung gemacht haben. Reparieren Sie es und fliegen Sie es langsam. Wenn man schnell fliegt, ist es nicht gut. Fliegen Sie langsam, es funktioniert gut. genieße das Fliegen
@derbastelopabaut1355
Жыл бұрын
Hä ?....was hat das jetzt mit " langsam fliegen " zu tun ?🤔🤔 Und reparieren kann man diese ...meine!..vergratschte Folie auch nicht, bei mir war nicht! so ein glatter Bogen dabei. Nein, dieses Video ist geschönt! Das aufbringen dieser Folien wurde hier bewußt " übersprungen".
@@TWSreviews, da gibt es nichts zu reparieren. Und wie ich fliegen soll? ...hab jetz gut 50 Jahre geübt. Von Arkai jedenfalls... Null entgegenkommen👎
@TWSreviews
4 ай бұрын
@@derbastelopabaut1355 Entschuldigung für meine schlechte Übersetzung. Sie können mit jeder beliebigen Konfiguration dekorieren. Sie geben Ihnen mehr als Sie brauchen.
@mareckgraves3247
4 жыл бұрын
can u buy me one
@TWSreviews
4 жыл бұрын
I have noticed that the stock levels are low unless you purchase from China
@howintesting940
4 ай бұрын
poor quality EPS foam, look at density, pinch it you will know...
@TWSreviews
4 ай бұрын
it is a cheap plane and I guess the intention was to be light. Flies well and looks ok.
@howintesting940
4 ай бұрын
@@TWSreviews the motor mount is a piece of plastic that glues onto the fuselage, no any reinforcement, flimsy junk
Пікірлер: 62