Fantastic video. Did the whole job in about 2 hrs with high confidence since all the details were provided. Thanks!
@fcpeuro
10 ай бұрын
Nice work, Jay!!!
@IsaakMK7
5 ай бұрын
What obd eleven do You need
@clearkill1337
Жыл бұрын
So no need to replace the rear carrier bolts since we can slide the rotors around them. Pretty slick! Thanks for the video.
@Solidityv2
Жыл бұрын
Thank you very much for this tutorial. I've successfully done the rotors and pads on my MK7.5R, incase anyone is interested, I went with the "cheaper route"- I purchased a ELM327 OBD2 Scanner and used an app called Carista to open my Electronic Parking Brakes.
@fcpeuro
Жыл бұрын
We're glad it was helpful!
@KaputtEqu1pment
Жыл бұрын
@@fcpeuro Silly question, but would this step be needed if the vehicle is a manual? I'm assuming no?
@MrMrAzad
Жыл бұрын
yes as long as u have electric park brake, doesnt matter if its automatic or manual@@KaputtEqu1pment
@HoBBLeCooKiE
5 ай бұрын
@@KaputtEqu1pment not needed. You are right. Just did mine.
@dw1508
Жыл бұрын
Fantastic video, quality camera angles and instructions perfect. Im about to get mine done and ur info helps heaps
@mamega99
10 ай бұрын
Absolutely useful video. Thank you so much for it, I changed brake pads without effort✌🏼✌🏼
@Golfr2020
Ай бұрын
Good demonstration. Thank you! I can retract the park brakes with OBD11. 👍
@diomedia1
Жыл бұрын
Thank you for this tutorial! It was very helpful. (It came out three days after I ordered new rear carrier bolts from FCP - whoops) One important thing this video didn't mention - some rear pads will need to reuse that metal shim on the outside pads. The TEXTAR pads needed this shim since there was way too much play.
@dw1508
Жыл бұрын
Thanks for the video very well explained , it helped me do my brakes much faster so good ATE designed this rotor to be removed without removing the caliper bracket.
@bonkerscat1074
Жыл бұрын
Thank you for this Video. Very informative & clear. Thank you 🤙🏻
@biff1tannen
7 ай бұрын
Great video😊
@YCymro69
Жыл бұрын
A nice, well-presented, very helpful instruction video - thanks. Of interest, after reinstalling everything do you use the diagnostic software to end the procedure first and then pump brake pedal pressure, or pump the brakes and then end the procedure? Or doesn’t it matter either way😅
@fcpeuro
Жыл бұрын
Thank you for watching! We end the parking brake procedure, then pump the pedal a few times before taking it out for a test drive.
@peterpabian
4 ай бұрын
How do you know when you dont have to use the special tool that twists the piston in? Is that only on cars with the electronic parking brake?
@heinrichpelser
Жыл бұрын
You can use the obdeleven to enter service position. I have it so that’s a bonus
@fcpeuro
Жыл бұрын
Great note!
@Golfr2020
Ай бұрын
Same here. They are worth having to do tweaks e.t.c
@rickydub6950
Жыл бұрын
Great diy as always 😎💪
@motourrad
Жыл бұрын
Thank you for the tutorial 👍.
@bretthall5770
Жыл бұрын
Do you close the electronic parking brake first and then pump the brake peddle or doesn’t it matter? Thanks
@xoticcounter6669
3 ай бұрын
I have a MK7 Sporstvan. Do I have to remove the carrier or can I also slide the rotors around? Thanks!
@jc2578
10 ай бұрын
thank you so much for sharing this video. - will this be same for VW GTI 2018 model?
@fcpeuro
10 ай бұрын
Thank you for watching! The same general process will apply to your GTI!
@reinulf656
Жыл бұрын
Can you reuse the silver plate in front of the outer pad as it was originally? Does it fit with these aftermarket pads?
@TomGeez
Жыл бұрын
"calibrated wrist" 💯😄
@hansmoser162
7 ай бұрын
Can the ignition be shut down after opening the brakes by OBD and while working on the brake? Or has the ignition to be on all the time?
@abdulyaseen4821
7 ай бұрын
Yea it won’t affect it and you don’t want your battery dying either. When you put everything back together. Turn the ignition back on and code it to close
@brianmaclachlan1699
Жыл бұрын
7:49 what liquids did you use to clean up the calipers and carrier?
@JeffersonHumber
10 ай бұрын
I notice the old out board pad had a silver coloured shim cover on it, and this wasn't moved over to the new pad. Is that right, is that silver shim cover not really required for the new pad?
@fcpeuro
10 ай бұрын
Hi Jefferson, some pad manufacturers will often include them based on the sizing of the backplate, not mandatory, only to be used if part of the pad replacements you are installing.
@lmd6204
6 ай бұрын
Does this apply to a 2017 VW Alltrack with manual transmission with hill descent control??? Thanks!!
@rudyvictor1119
4 ай бұрын
You dont need any autel or other scan tool. Unplug electric brake motor wire and apply 12v. This saves lots of cash for a one time job
@travismccarthy5681
9 ай бұрын
So I have a 2019 golf r I can use a standard piston compressor tool for rear calipers? I thought it was rotated ?
@fcpeuro
9 ай бұрын
Hi Travis, as shown here, they do not need to be spun in, your 19' model should be the same!
@mykeable
4 ай бұрын
I have a 2018 Volkswagen Golf TSI Highline. Do I need that computer to read my car even though my parking brake is manual?
@fcpeuro
4 ай бұрын
You will not need a scan tool if you do not have an electric parking brake!
@mykeable
4 ай бұрын
@fcpeuro I figured. Only problem now is one of my lug bolts is seized right on. I have a 1/2in impact wrench with 1600lbs of nut busting torque. Not even that is breaking it free. Might have to drill it out.
@paulthecarwhisperer250
8 ай бұрын
How come there are notches on the piston if they don’t need to wind back?
@fcpeuro
8 ай бұрын
More than likely, they are using existing tooling to create these pistons, vs creating new tooling and adding an unneeded cost when manufacturing. This is just my guess! -Mike
@sydneyfranke
11 ай бұрын
I have just a normal pull handle for my e brake do I still need the 808?
@fcpeuro
10 ай бұрын
No need! Just make sure it's down before you start your brake job.
@nickdorn6876
Жыл бұрын
Is there a good way to retract the electronic parking break without a scan tool?
@MoistVW
Жыл бұрын
Nope
@devbercy
Жыл бұрын
Yes, remove the electric motor and manually twist it back. kzitem.info/news/bejne/lqGNrnp6s6GIrKA Easy.
@brdpit
Жыл бұрын
@@MoistVW yes you can, plenty of videos how.
@SalvageMasterEssex
Жыл бұрын
@@brdpit Not worth the risk. Save a few bucks and risk ruining the calipers. VW manual clearly states if you force pistons back without doing the diagnostic procedure the epb motors will be damaged. Some idiots are even telling viewers to dismantle the motors which VW warn against doing.
@GTI.OWNERSCLUB
Жыл бұрын
Need obd eleven .
@basilsoofi4244
Жыл бұрын
Are the GTI non performance pack rear rotors the same, where you don't need to remove the carrier to remove the rotor?
@afzalahmed3616
8 ай бұрын
Been a while, but yes same setup no need to remove caliper housing
@19S.G84
7 ай бұрын
👍👏👌
@r1cko750
Жыл бұрын
Your packing system sucks My new rotors arrived scratched Shipping box was filled with paper Nothing else to protect the rotors.
@blue-ck9ns
10 ай бұрын
Lol wtf. It doesn’t matter if a rotor is scratched, it’s going to get all scratched up anyways from the brake pads rubbing up against it. My new rotors from the dealership also were scratched
Пікірлер: 57