That duration on the volts cam sure is letting those big valves do work compared to the Paul's kart. Fast bike fore sure. Love to see same setup with step exhaust and no muffler.
@gregswafford9839
Жыл бұрын
@Black66 Do you have the cam specs/card? They aren't posted with the cam on the site.
@Black66
Жыл бұрын
@@gregswafford9839 No, it didn't come with a card. Im not sure of the specs.
@BuildBreakFix
Жыл бұрын
How in the hell have I never seen this channel before! Just found out like 500 of my subscribers watch this guy was like what us that? Absolutely love the minibike content! Now I have to build 250cc 2 cycle mini bike after watching this lol I got the itch now 🍺😮👍
@BustedKnucklesBuildsTexas
Жыл бұрын
He does great test videos for sure !
@justincuellar3101
3 ай бұрын
Loved how that dirt patch got the wheel speed up for that cam
@minibikemadman
Жыл бұрын
Paul's karts is local like 30mins from me. .I've been following him for a whike.. a cool dude and does some great work..im in the process of building a hemi 212 switching from a flathead methanol briggs.
@Black66
Жыл бұрын
Awesome! We use to run the flathead Briggs in kart racing back in the 1980s with billet Hortsmnan parts on methanol. There are a couple picks in the community tab on the channel.
@username-mk8gf
2 ай бұрын
My favorite bike! What a great city cruiser it would be geared down.
@Black66
2 ай бұрын
Yeah mine too! It is a great cruiser .
@peterchristlieb
3 күн бұрын
The Volt’s cam is an Isky 330, great cam and big, 260 duration.
@michaelkrutz5737
Жыл бұрын
That was quite of a difference. Thank you for all you do to keep us informed.
@honeybadgeractual5734
Жыл бұрын
I know this is unrelated, but I would love to see an experiment. Tillotson 212 stock (electric start preferably) Block Internals: ARC stock length con rod, mod 2 cam, stock pushrods and lifters, and stock piston, stock crank as well. Head work: ported head, like 1.2mil over spec, 1.2:1 ratio lifters, 24lb valve springs, high compression gasket, stock carb with short manifold and long runner between the filter and the carb (like a snorkel or a 90* back turn to where the gas tank used to be over top of the block.) Objective, takeoff speed, full rpm range of the torque converter, possibility to run powered accessories and have extra power over stock, perhaps the converter allowing for taller final drive ratio perhaps a custom 14t sproket on the driven pulley, and a 35t or 30t on the hub, greater top speed, with faster acceleration, and still keeping rpm down. But I could be completely wrong with my theory. External work: torque converter Tav2 30 series, stock electric start flywheel, with stator magnets and stator installed for headlights.
@desertnate
10 ай бұрын
Back in 2018 my favorite channel on KZitem was bleeping jeep and finally after a few years hhjh found your channel about mini bikes and I have a mm80 frame
@miguelpagansr6128
Жыл бұрын
That's one sick minibike brother, can't wait to see the next video.
@patrickkennedy7888
Жыл бұрын
One of the best mini bike channels out here right now. I'm really curious to see the difference in the bigger blocks like a 301 or 420 etc..
@SpAcEcruizer203
Жыл бұрын
Love how he magically set that valve lash I thought I was on Crystal for a sec back there lol good speed wit the quickness
@Black66
Жыл бұрын
No crystal , just plain ol magic!! 😃😃
@SpAcEcruizer203
Жыл бұрын
@Black66 love it man when I order the gts frame what color should I rock with u seen them in person
@SpAcEcruizer203
Жыл бұрын
@Black66 I actually need a vid on it because I have some 22lbs ones coming in should I do the rope technique or take off the side cover
@andrewkuhtz
Жыл бұрын
That volts cam is sweet for the price! Thanks for sharing dude👍
@rogermcdonald1607
Жыл бұрын
Very cool comparison on the cams sir. I would love to see you do more videos on clutches and how to tune adjustable clutches and there effects on top end and also 0-30 MPH. I would also love to see the difference between a clutch for the average minibike compared to the serious all out racer!!! Great stuff man!👏🎥👍🇺🇸
@jason1655
8 ай бұрын
You're an intelligent motor builder.
@matthewf1979
Жыл бұрын
That’s one hell of a mini bike! I could almost commute on a bike like that.
@MesaMinis
Жыл бұрын
Another awesome video man! Looking forward to the gts video.
@559Minibike_Avil
Жыл бұрын
U should put a volts pipe on there too!
@lewissmith234
4 ай бұрын
I want that exact bike!
@oddiebacca
Жыл бұрын
Another great video with useful content, Thx Buddy!
@Leveluplivin
9 ай бұрын
@9:06 yeah it might be cheaper but I talk to people & seen the google reviews where people are not receiving their order and products from them 😢
@trucker2b
Жыл бұрын
Ohhh this should be good
@mohammedmuaalla7444
Жыл бұрын
you should make a video comparing a ARC Billet rod and Flat top piston vs a LONG ROD AND SHORT PISTON!?
@bzamski17
Жыл бұрын
Cool bike
@darrellnichter9894
Жыл бұрын
Hey go power sports....sponsor this guy!
@Black66
Жыл бұрын
There are a few GPS sponsored videos on the channel. Here is one...kzitem.info/news/bejne/p6COmG2ukWaTqIo
@joshuaarch1089
Жыл бұрын
Worst mini bike company around 😆 🤣
@TedTucholski
Жыл бұрын
Probably a good idea to shop elsewhere other than Paul's Karts.
@mitzu8386
Жыл бұрын
yup
@caseybray4321
Жыл бұрын
Why?
@joshuaarch1089
Жыл бұрын
Your gearing is holding the top speed back.
@Black66
Жыл бұрын
Yes, I need to keep the gearing the same to keep the parts test consistent.
@charlesstull4582
Жыл бұрын
I've been thinking about building a champion 224 for my colmam ct 200
@WyFoster
Жыл бұрын
Would really like to see like a 30-50mph metric.
@trucker2b
Жыл бұрын
More duration at top speed.. means more air more fuel..better chamber filling and purge ....which makes more power ....
@freeradical6390
Жыл бұрын
youd get quicker 0-30 if you held the brake and stalled the converter.?
@Black66
Жыл бұрын
I try and keep the launch technique the same in every test just to try and keep things consistent for the parts comparisons. .
@natrual_ice7370
Жыл бұрын
How do you pull that starter I’m having trouble starting my stock ghost 212
@igokarts4510
Жыл бұрын
❤️❤️❤️❤️
@honeybadgeractual5734
Жыл бұрын
Would I get more power of I took a 196 head, ported it out, used bigger valves, and bolted it onto my 212? With governor intact? I'm always looking for more power while being able to keep my nifty battery charging system and electric start.
@devond1
Жыл бұрын
Please do a video installing a speedometer on the mega moto 212 I can’t figure it out
@562jamesj
Жыл бұрын
What size crank bolt are you running on the 225 crankshaft? Is it 5/16-24 fine thread?
@Black66
Жыл бұрын
Yes, 5/16 fine thread.
@SpAcEcruizer203
Жыл бұрын
I'm stuck between the volts Gts frame of a mini trike from rpc plasma cuts
@edgarcamez2542
Жыл бұрын
hey what type of chain breaker is it that you use? care to post a link to it? im looking to buy one...
@Black66
Жыл бұрын
Volt's mini bikes has that chain breaker on the web site.
@forest1130
Жыл бұрын
My Coleman mini bike has a hard throttle any idea how fix it and loosen it up
@suarvemarv
Жыл бұрын
Why do these guys keep their cam specs secret? Why would i buy a mystery camshaft of undisclosed duration, centre lines or even lift on Pauls kart cam. Swap that Pauls head out and it'll go ever better.
@Black66
Жыл бұрын
Check out the Mega Moto playlist. We have tried many different cams and combos with this bike kzitem.info/news/bejne/t5iZ1nVmo5aEfKw
@joelnevarez3058
4 ай бұрын
So im adding a 308 cam to my 225rs it had 26lbs spring stock would i have to up grade to 37lbs springs
@brentp51
Жыл бұрын
Don't order this cam or any other parts from volts minibikes unless you wanna live to regret it like I and others have from what I've been reading. I've waited 2 months for my cam. Still haven't received it. Read on their facebook a post where another guy was still waiting for his parts after weeks. I finally ordered cam from somewhere else. I messaged them on Facebook, instagram, email and called them multiple times. No answer when I called or response to my messages!!! I finally had to call my my financial institution and have them try to deal with it. Been tons of fun and it was the only thing holding up my build up. Sucks I had to buy the same part twice and I might not even receive my money back from them according to my financial institution.
@homersimpson6348
Жыл бұрын
Did you have to cut the push rods?
@Black66
Жыл бұрын
No, I didn't. Check out the playlist for many more cam installs. kzitem.info/news/bejne/2Yxuz2lvmnmGlKQ
@anthonybooth9511
Жыл бұрын
can i buy that mini bike asap
@busaofscbusaofsc8633
Жыл бұрын
Just found this channel. Building a predator 212 and I’m having a lot of vibration from the engine. Can you address this issue. Reading this is normal for a predator.
@fuckingbasterds
Жыл бұрын
Pretty cool dude
@daltonemery4579
Жыл бұрын
Is the predator ghost faster out of the box stock or is the predator 224cc faster out of the box stock
@Black66
Жыл бұрын
The 224 has a governor out of the box so it might be slower but The 224 has more potential IMO because of the 58MM stroke and block. If you are going to have to buy billet parts for either engine and especially the ghost to get rid of the rev limiter then I would rather buy them for the 224. Even though the Ghost is a good engine. Nothing wrong with it.
@daltonemery4579
Жыл бұрын
@@Black66 great info I appreciate it !
@devinkirane6184
Жыл бұрын
How did you like the 24mm carb on that bike vs the 28mm did you find one work better then the other? Wondering if the 28mm would be boggy down low
@Black66
Жыл бұрын
Check out the Mega Moto playlist. There are videos on there comparing the two carbs. kzitem.info/news/bejne/lpiwz42Ejnx8rHo
@baseballmediacenter6159
10 ай бұрын
what kinda cluch is on there?
@Black66
10 ай бұрын
Here is the clutch video kzitem.info/news/bejne/tqB-z2xjgoKDrGk
@darrellpearce9241
Жыл бұрын
You need some 10” wheels and some Dunlop 130/90-10 d180 tires. 19.2” tall. Get those a bike and compare that!
@GILSJOURNEY
6 ай бұрын
What is your timing for this cam?
@Black66
6 ай бұрын
i think I was using 32-34 in this video.
@GILSJOURNEY
6 ай бұрын
@Black66 I am running an ARC flywheel with 32 degrees of timing. I am also running the same 330 cam, should I add 2 degrees of timing? Thank you in advance for your help, I have managed to build 2 pretty respectable mini bikes thanks to your videos.
@PrinceoftheLightSkins
Жыл бұрын
You need heavier springs 55lb duals+
@BikeLyfeCeas
3 ай бұрын
Sounds like shit 0-30 like it ain’t going no where stall set to high
@joneserupinsmoke9161
Жыл бұрын
i deff like the vids /builds but it tkes so much to get four strokes up on speed next to 2stokes .it cost st to much more for me but ye msn i like this build
Пікірлер: 80