VERY HELPFUL MAN , JUST FIXED MINES, I HAD THOUCH THAT LITTLE SPRING AND MOVE IT, I PUT IT THE WAY IT WAS AND IT STATED WORKING RIGHT AWAY
@habebs7345
4 ай бұрын
Note; this is video applies for an automatic transmission, just so you don’t see that sensor for a manual transmission it’s actually on the clutch pedal, that solved my issue thank you sir! Also that sensor if it’s out of place the engine brake doesn’t work along with the cruise control
@valeriumoscalu7580
4 ай бұрын
Yes you are right! Thanks for the note and glad you fixed the problem! 💪🏼
@daliborkilibarda9099
2 жыл бұрын
Thank you ...you are awesome.. just fixed after 500 miles 😀 but now works... Thank you so much 👍🏻
@valeriumoscalu7580
2 жыл бұрын
You welcome Sir!
@zainullahwaziri7367
2 жыл бұрын
I just fixed mine by watching your video Thank you so much
@valeriumoscalu7580
Жыл бұрын
You welcome!
@99jivvity
2 жыл бұрын
Found my spring just like that, managed to fix it without removing the panels. Thanks for the video.
@valeriumoscalu7580
Жыл бұрын
You welcome!
@rafkatmakalim707
Жыл бұрын
Thank you. Video helps. After change metal cabel for steering wheel ajustment i got same problem.
@janiomota5384
6 ай бұрын
You’re the only one to say that. Thx
@brsbeard6893
2 жыл бұрын
Thanks bro I just checked that and that is my problem now I would like to replace the switch on the break
@NotAJ-yn3xe
2 жыл бұрын
Looking forward to more content on volvos
@MrBossTrucking
10 ай бұрын
Very helpful! This just helped me
@danielibobby5656
Жыл бұрын
You the best Valera..
@valeriumoscalu7580
Жыл бұрын
Thanks!
@michaelgonzalez7646
Жыл бұрын
Very helpful video 🤙🏾🤙🏾
@christopherthompsom2646
Жыл бұрын
This absolutely worked.
@valeriumoscalu7580
Жыл бұрын
You welcome!
@biggjosh1991
2 жыл бұрын
Very helpful thanks!
@mimeshkg1791
Жыл бұрын
Great work 👍🏼
@nelovezee3538
Жыл бұрын
Bro Thank you so much you saved 🙏
@kangarootrucker
2 жыл бұрын
Great job!
@valeriumoscalu7580
2 жыл бұрын
Thanks!
@ismailrakkib8529
11 ай бұрын
❤❤❤ Thank you Man ♥️♥️
@valeriumoscalu7580
11 ай бұрын
You welcome!
@josephramirez843
2 жыл бұрын
Good fix
@agustinmarin1261
Жыл бұрын
Thank you for the video i fixed 👍
@valeriumoscalu7580
Жыл бұрын
You welcome! I am glad it was helpful!
@muhammedmustafa2773
2 жыл бұрын
Thank you so much 🙏
@valeriumoscalu7580
Жыл бұрын
You welcome!
@MiLoTi85
Жыл бұрын
This helped me out figure out same issue but I have different problem. My break pedal is loose and so it stays down to much so spring has no action that the break is depressed. How do i tighten the break pedal so it stays up and doesn’t have to much free play?
@berhanugetahun2140
2 жыл бұрын
Thank you so much.
@valeriumoscalu7580
2 жыл бұрын
You welcome!
@albertoespinoza1746
Жыл бұрын
It happen to me to thanks bro
@trollstar5418
2 жыл бұрын
Valeriu! My cruise control stop working after changing pass through on d13 can you tell me which sensor controls cruise please !?
@antoniosarmientoluna6497
2 жыл бұрын
Will this affect the jake break as well ?
@karimovm.5890
Жыл бұрын
Appreciate!
@valeriumoscalu7580
Жыл бұрын
You welcome!
@TheOfficialAT
Жыл бұрын
What about for a Manuel ? I don’t see the switch
@Heavyhaultruckin
2 жыл бұрын
Brother where’s is your shop located? Im in tacoma and need some job. Thank you
@johnnybrown6784
3 жыл бұрын
My 2016 vnl adaptive cruise will engage and disengage but often times vec sensor abs/tcs lights come on
@abarca2013
2 жыл бұрын
Did you ever fix this issue I have same problem
@kellyhoneyfeloncdljourney
Жыл бұрын
Could this possibly be connected with my problem of losing response to throttle? Sometimes I lose acceleration and my engine brake, after about 20 seconds truck will return to normal.
@valeriumoscalu7580
Жыл бұрын
I don't think it is related to loosing response from throttle!
@ogarkhoshaba5672
3 жыл бұрын
I’m little confused. Are you testing the PTO or the cruise control? I know the CC will not come on unless you got above 30mph…? I’m not sure what you trying to do here. Please help explain in this comment because I’m having issues with my CC but not my PTO.
@valeriumoscalu7580
3 жыл бұрын
The cruise control wasn't working and this brake pedal switch was the problem, the spring jumped under the brake pedal and the ecu always were receiving the information that brake pedal is applied even if it was released and cruise wasn't working!
@johnnybrown6784
3 жыл бұрын
I was thinking same thing
@teopina8881
Жыл бұрын
I'm having the same problem my CC is the one that doesn't work have y fix yours?
@Skvflorida
Жыл бұрын
У меня проблема с круизом только на парковке , когда едешь все работает , когда надо холостые поднять на запаркованом , не работает , есть идеи ? (Пружинка и сам переключатель работают- проверял).
@valeriumoscalu7580
Жыл бұрын
Connect the computer and check if its not deactivated!
Пікірлер: 55